08-05-2018, 08:51 AM | #1 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Cordes Performance Racing ZL1 1 Gallon Intercooler tank
Got a Cordes Performance 1 gallon intercooler tank installed this week.
It comes with hoses pre-terminated with connectors, hose heat shrink, zip ties, nut/bolt for mounting, nice MM catch can mount, and a CPR coozie! You can see the installation photos below. I had to nip a 1/4" corner out of my fan shroud to make it fit on my car but you can't even tell. The hood rain diverter has to be removed to fit, you could easily take a small piece out of it too if you want to retain it. Everything down to the cap on the container is very high quality. The black coating is tough and looks nice.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
Last edited by LiqTenExp; 08-05-2018 at 10:06 AM. |
08-05-2018, 09:04 AM | #2 |
Life's Short, Live Fast!
Drives: 2017 Hyper Blue A10 ZL1 Join Date: Nov 2016
Location: London, KY
Posts: 2,015
|
Looks nice! I would prefer a larger lid to make it easier to put ice in, but it looks like it can still be done.
When you say hood cowl, you're talking about the plastic rain diverter, right?
__________________
Life's Short, Live Fast! https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA, https://youtu.be/OXQiCQdQuH4 11.40 at 125mph 1800 DA
https://youtu.be/uWba1qs8M6Q 11.52 at 123mph 3500 DA TZQPHG '17 ZL1 HBM|A10|Nav|PDR|CFW Hood|ZL1 Mats 12/26/2016 Ordered! 2/8/2017 Built!! 3/2/2017 Brought Home!!! Last edited by 17CamaroZL1; 08-05-2018 at 04:21 PM. |
08-05-2018, 10:07 AM | #3 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
yes rain diverter, thanks I updated the post.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
08-05-2018, 02:28 PM | #4 |
Drives: 2017 Camero ZL1 Join Date: Nov 2015
Location: Texas
Posts: 130
|
Looks good. Is your car otherwise stock? Seeing any benefits?
__________________
2017 ZL1 A10
Dyno/Quarter Mile/Dragy 9.71@141.2 MPH so far. 2007 Z06 H/C/I/E Half Mile - 169 MPH. Sold. |
08-05-2018, 03:35 PM | #5 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
It has some other minor updates (3" borla catback, gauge pod, aerforce interceptor gauge). In a couple weeks it is going in for a magnuson 2300, headers, intake, TB, maybe more.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
08-05-2018, 03:43 PM | #6 |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
It looks like a quality piece. Looks clean LiqTenExp.
I was going to mount my CC there. Are there other mounting options? Perhaps back where the ADM sits? Thanks in advance.
__________________
2018 ZL1 1LE sw/PDR
|
08-05-2018, 05:20 PM | #7 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Right now they have this one that mounts only as shown and the 2.4G bumper mount one if you need something with more capacity.
https://www.facebook.com/commerce/pr...010469798&rt=6 https://www.facebook.com/commerce/pr...010469798&rt=6
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
08-05-2018, 05:22 PM | #8 | |
Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016
Location: Katy
Posts: 2,104
|
Quote:
Joel has one of those on the 4 sale thread. Yours looks clean. I like that set up.
__________________
There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.
|
|
08-05-2018, 05:26 PM | #9 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
It fits in there neat, doesn't sit on top of the headers heat wise, and holds a decent amount. Their support with it was great too.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
04-27-2019, 09:13 AM | #10 |
Flyin NOE
Drives: 2018 ZL1 (A10) Join Date: Apr 2017
Location: TX
Posts: 949
|
|
04-27-2019, 10:57 AM | #11 |
Bannable
|
I wish it sat higher than the supercharger so it could double as a high point for potential air bubbles.
__________________
One must forego the self to attain total spiritual creaminess, and avoid the chewy chunks of degradation
2017 ZL1 A10 - Hyper Blue Metallic Rotofab CAI, TM ported TB, AWE non res touring catback with PLP's |
04-27-2019, 11:03 AM | #12 |
Flyin NOE
Drives: 2018 ZL1 (A10) Join Date: Apr 2017
Location: TX
Posts: 949
|
Would it not catch air bubbles as they move through the system?
|
04-27-2019, 04:51 PM | #13 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
when the magnuson 2300 was put on my car we used the fill point supplied by them to fill and relieve the system of bubbles.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
04-27-2019, 05:02 PM | #14 |
Flyin NOE
Drives: 2018 ZL1 (A10) Join Date: Apr 2017
Location: TX
Posts: 949
|
|
|
|
Post Reply
|
|
|