[SS 1LE]

Originally Posted by ULTRAZLS1

Tires used on the pass: M/T ET Street R 305/45/17 (17 psi healthy burnout was best)
Performance Mods (if any): DR, CAI, PTB, RSD (Rear Seat Delete I'm 250 needed it lol). Stock tune. 93 octane. 1/4 tank.
Category submitted for: Bolt on no internal mods (Stock Displacement)
R/T.......... .330
60'.............1.713
330'...........4.966
660'...........7.620
660’ mph...93.40
1000'..........NA
1320'..........11.808
1320’ mph…116.44
Name of track: Milan Dragway
Date of pass: 10/21/2016
Weather conditions: -120 DA. 49 F. 15 mph headwind.

Had an 11.7@117 in the bag on this run. Was holding the car in gear crossing the traps all night to prevent a shift before the line. It helped. But as DA dropped it was faster and I hit the limiter 50-100 feet before the line this pass! Doh !

Sorry bout sideways pic... not sure how to correct it :(
Attachment 828156

Nice run man, any idea how much the rear seat weighed?

[R3DLT1]

Originally Posted by SS 1LE

Nice run man, any idea how much the rear seat weighed?

30lb on the rear seats and 50 lbs on the passenger seat for the 2ss

[ULTRAZLS1]

Originally Posted by SS 1LE

Nice run man, any idea how much the rear seat weighed?

Thanks

Yeah it's not much. 30-40 lbs. I weigh 250 so every bit helps. Wasn't even gonna list it but I'm too honest.

I think the front is about 50. I'm gonna take that out and will be likely a bit better conditions when I go again soon. Just hope the track will hold being even colder. Thinking a throttle controller will help the 60 on these cars. With bit lower DA, front seat and the controller it may run 11.6 if it hooks. 11.7 is a certainty. Less wind would help too.
The 11.80 run
https://m.youtube.com/watch?v=HYYF6rxJNik
Some others
https://m.youtube.com/watch?v=a7U8S5pOjfw

https://m.youtube.com/watch?v=D3V9q3vzbos

[RageWorx]

I apologize for the mistakes in my previous post. Lets try again.

Tires used on the pass: Mickey T 305/40/18 ET Street S/S drag radials.
Performance Mods (if any): =Drag radial only on c6 Z06 wheels.
Category submitted for: Camaro SS 2016+ LT-1 Bolt On's NO Internal Mod's (Stock Displacement).

R/T............0.146
60'.............1.760
330'...........5.0008
660'...........7.670
660’ mph....91.88
1000'..........9.935
1320'..........11.860
1320’ mph…117.31
Name of the track: Raceway Park Englishtown NJ
Date of pass: 10/5/16

[Merc]

Originally Posted by wnta1ss

There have been 2 cases recently of people doing wheel and tire changes yet claiming their car is bone stock. Specifically, posts #327 and #426. The bone stock description clearly states stock tires. The category is not 'sorta stock' or 'mostly stock', it's bone stock. Neither of those cars was bone stock when the slips were produced.

Both of those cars will end up in Category #3 when I update the lists.

[JFM-jr]

Originally Posted by Merc

You need to review the 1st post in this thread. Third party photo storage does not cut it, to be added to any list, times slips need to uploaded directly to C6 site.

I don't get this so if I have photos on photobucket and use their link with the "IMG" coding its not good? if not maybe you could explain how to upload directly to this site.

[Merc]

Originally Posted by JFM-jr

I don't get this so if I have photos on photobucket and use their link with the "IMG" coding its not good? if not maybe you could explain how to upload directly to this site.

Third party photo storage gets purged now and again and when it does we loose the photo in the post. On C6 when you post, click go advance, click manage attachments, click search, find photo in your file, click it and then click upload. Once it is uploaded click close, then click the paper clip and then click the image and your done.

That way the photo of time slip will not disappear down the road. Tip send the pic to your desktop to find it easier.

BTW if you can upload it to a third part storage, you certainly should be able to upload it directly to C6.

[JFM-jr]

Originally Posted by Merc

Third party photo storage gets purged now and again and when it does we loose the photo in the post. On C6 when you post, click go advance, click manage attachments, click search, find photo in your file, click it and then click upload. Once it is uploaded click close, then click the paper clip and then click the image and your done.

That way the photo of time slip will not disappear down the road. Tip send the pic to your desktop to find it easier.

BTW if you can upload it to a third part storage, you certainly should be able to upload it directly to C6.

Seems easy enough and a very reasonable explanation as to why Thank you

[Tim Adams]

Bone stock, only mods are BMR suspension parts which actually ADD weight to the car.

Tires: Stock, 23psi, good burnout
Mods: None
Category: Bone Stock
R/T: .193
60': 1.835
330: 5.169
1/8: 7.899
MPH: 90.81
1000: 10.236
1/4: 12.214
MPH: 113.47

DA 539ft, 55 degrees, headwind.

[SS 1LE]

Originally Posted by Tim Adams

Bone stock, only mods are BMR suspension parts which actually ADD weight to the car.

Tires: Stock, 23psi, good burnout
Mods: None
Category: Bone Stock
R/T: .193
60': 1.835
330: 5.169
1/8: 7.899
MPH: 90.81
1000: 10.236
1/4: 12.214
MPH: 113.47

DA 539ft, 55 degrees, headwind.

BMR suspension = not bone stock.

...they don't allow a street tire change, they definitely won't allow suspension mods lol.

[EXSSIVE]

Suspension is a HUGE part of cutting a good time. Certainly not stock at that point. A tenth in the 60ft time can pick up a ton of time on the big end.

[Tim Adams]

Originally Posted by SS 1LE

BMR suspension = not bone stock.

...they don't allow a street tire change, they definitely won't allow suspension mods lol.

No problem, change the first post to mention suspension mods, there is nothing in that first post about suspension changes.

[laynlo15]

Tim, where did you run? Didn't see the track

[Tim Adams]

Originally Posted by laynlo15

Tim, where did you run? Didn't see the track

Sorry, clipped it in the pic. Byron Dragway, Byron IL.