[IMCWORTH]

Originally Posted by Roddrz

In the engine compartment fuse block, would anyone know the function of the K2 Relay Run/Crank and the K10 Relay Starter?

Assuming K10 disables the starter motor, what is K2's function?

Thanks in advance, while I investigate.

What are you trying to accomplish? the K10 if you pull it your car wont start. so that would be your starter relay
The K2 I tried to do a remote relay disable and it didn't do anything.

[IMCWORTH]

Originally Posted by Roddrz

In the engine compartment fuse block, would anyone know the function of the K2 Relay Run/Crank and the K10 Relay Starter?

Assuming K10 disables the starter motor, what is K2's function?

Thanks in advance, while I investigate.

PM Sent.

[crossroaddemons]

I pulled the starter relay as a quick anti theft measure and had a very peculiar problem afterwards. I immediately replaced the relay and attempted to start the car. It cranked for a really long time but would not run. Meanwhile the parking lights and drls stayed on no matter what I did. I started getting a message on the dash saying battery low start car. The car had a very strong crank so I ruled out the battery. In order to fix it I disconnected the negative cable for about 5 min. It started right up. I’m still unclear as to why momentarily pulling the starter relay resulted in this issue.