[NYTMARE23]

Originally Posted by 6spdhyperblue

LED? Did u use resisters?

Not sure what Calgary used for bulbs, but I used the NOKYA 7440 Hyper White bulbs. No resistors needed and give it the "LED" look. All for about $28.00 . DEFINITELY look better than the incandescent "yellow-ish" bulbs. . Unfortunately I was stupid and didn't get a side by side...so these will have to do..1st pic is incandescent..2nd is the NOKYA bulb..

[Bumbleboy92]

Originally Posted by NYTMARE23

Not sure what Calgary used for bulbs, but I used the NOKYA 7440 Hyper White bulbs. No resistors needed and give it the "LED" look. All for about $28.00 . DEFINITELY look better than the incandescent "yellow-ish" bulbs. . Unfortunately I was stupid and didn't get a side by side...so these will have to do..1st pic is incandescent..2nd is the NOKYA bulb..

You’ve convinced me to give them a try, just got them off eBay for $19 for the pair. I’d rather not take off my bumper nor pay $90+ for the LED harness

[NYTMARE23]

Originally Posted by Bumbleboy92

You’ve convinced me to give them a try, just got them off eBay for $19 for the pair. I’d rather not take off my bumper nor pay $90+ for the LED harness

. Yeah. I was looking for something to replace those "yellowy" factory bulbs and knew I didn't want aftermarkets(bumper removal) and I didn't want to have to add resistors and such. Have had the NOKYA's in for a little over a year now. Still look great and no Hyper blinking or any other issues. Did the license plate bulbs too, but for those I used the Diode Dynamics license plate LED's(they are plug and play...no resistors for those either). Here are the pics of those(one of each..factory and diode dynamics, then one with both diode dynamics installed). ....sorry for the sideways pics!

[Bumbleboy92]

Originally Posted by NYTMARE23

. Yeah. I was looking for something to replace those "yellowy" factory bulbs and knew I didn't want aftermarkets(bumper removal) and I didn't want to have to add resistors and such. Have had the NOKYA's in for a little over a year now. Still look great and no Hyper blinking or any other issues. Did the license plate bulbs too, but for those I used the Diode Dynamics license plate LED's(they are plug and play...no resistors for those either). Here are the pics of those(one of each..factory and diode dynamics, then one with both diode dynamics installed). ....sorry for the sideways pics!

Very nice, do you remember if you went with the 6000K or 5000K from their website? (For the license plate bulbs)

[NYTMARE23]

Originally Posted by Bumbleboy92

Very nice, do you remember if you went with the 6000K or 5000K from their website? (For the license plate bulbs)

Thanks!! I did the 6000K on those.

[CalgaryZL1]

Originally Posted by 6spdhyperblue

LED? Did u use resisters?

No, they are a halogen but nice and bright

[50MileSmile]

Finished two coats of ceramic wax before heading out on a fall drive across the most interesting roads in the state.

[CalgaryZL1]

Originally Posted by 50MileSmile

Finished two coats of ceramic wax before heading out on a fall drive across the most interesting roads in the state.

I’m actually taking tomorrow off because it’s one of the last nice days and head to the mountains! then it’s fill the tank with stabilizer and Park it for the year

[rcoe]

All cleaned up and gassed up ready to go away for the winter.

[CalgaryZL1]

Originally Posted by rcoe

All cleaned up and gassed up ready to go away for the winter.

Love the hood!

[DamonZ28]

Thanks for the ideas on the reverse lights and the license plate lights! I'll be ordering those soon! If you haven't replaced your trunk light, replace that too! There are really bright options out there and it's pretty easy to do.

[CalgaryZL1]

Originally Posted by DamonZ28

Thanks for the ideas on the reverse lights and the license plate lights! I'll be ordering those soon! If you haven't replaced your trunk light, replace that too! There are really bright options out there and it's pretty easy to do.

Yes, I replaced any and all bulbs that looked slightly yellow/old fashion

[NYTMARE23]

Originally Posted by CalgaryZL1

Yes, I replaced any and all bulbs that looked slightly yellow/old fashion

Same here! . I don't get why they(GM) doesn't just make ALL the lights(inside and out, LED's). My 2020 Silverado Trail Boss was the same way!..All LED'S except the license plate and reverse lights. So naturally those have been swapped also

[Kuutr]

Originally Posted by CalgaryZL1

I’m actually taking tomorrow off because it’s one of the last nice days and head to the mountains! then it’s fill the tank with stabilizer and Park it for the year

And so it begins. Unfortunately. West to east enjoy your ride. I’ve got maybe 1 week yet. Giver hell