[SkunkJunk420]

how are the drop springs holding up?

[mlee]

Originally Posted by Sinester17

I put a tape measure on it and it was about a 0.5 difference between the two. I put 150 miles on the car last night with zero issues. I couldn’t be happier.

And thanks for the fix!

Yeah, you definitely nailed it..

[Sinester17]

Originally Posted by SkunkJunk420

how are the drop springs holding up?

They are doing great! I couldn’t be happier. Car rides just like stock

[Sinester17]

Originally Posted by mlee

Yeah, you definitely nailed it..

Thanks. I got lucky and it all worked on the first try lol

[Victoryred1le]

Originally Posted by Sinester17

They are doing great! I couldn’t be happier. Car rides just like stock

I’m not sure if I missed it but how does it look lowered? You did Bmr springs right?

[Sinester17]

Originally Posted by Victoryred1le

I’m not sure if I missed it but how does it look lowered? You did Bmr springs right?

I did not. I used the afe springs from phastek. I am super happy with them o the car. 2000 miles and zero issues!

[Victoryred1le]

Originally Posted by Sinester17

I did not. I used the afe springs from phastek. I am super happy with them o the car. 2000 miles and zero issues!

Very cool! That looks so nice! Great results!

[Sinester17]

Originally Posted by Victoryred1le

Very cool! That looks so nice! Great results!

Thanks!

I’ve been talking to mti, again, and it looks like a direct port meth kit will Be next up on the week of the 11th! Can’t wait to see the results without my car in 80-90 degree heat with 110% humidity lol

[TDS]

Originally Posted by Sinester17

Thanks!

I’ve been talking to mti, again, and it looks like a direct port meth kit will Be next up on the week of the 11th! Can’t wait to see the results without my car in 80-90 degree heat with 110% humidity lol

So much for meth next spring LOL!!! You just couldn't help yourself! Whos kit did you decide to go with?

[Sinester17]

Originally Posted by TDS

So much for meth next spring LOL!!! You just couldn't help yourself! Whos kit did you decide to go with?

I’ve decided to use the plumbing, solenoids, and hard lines from the nx kit to utilize the lid I have now. the rest of the system, controller, pump, braided lines and tank to be from alky control. Kind of the best of both worlds so to speak.

[TDS]

Originally Posted by Sinester17

I’ve decided to use the plumbing, solenoids, and hard lines from the nx kit to utilize the lid I have now. the rest of the system, controller, pump, braided lines and tank to be from alky control. Kind of the best of both worlds so to speak.

Right on!

[Sinester17]

It’s getting closer! Mti is looking for a trunk mounted tank that will work for me and it’s onto the install on the 11th!

To say I’m excited is an understatement. After hearing how much power the car was losing due to the texas heat, I’m itching to see how much more powerful the car feels on the meth!

[TDS]

Originally Posted by Sinester17

It’s getting closer! Mti is looking for a trunk mounted tank that will work for me and it’s onto the install on the 11th!

To say I’m excited is an understatement. After hearing how much power the car was losing due to the texas heat, I’m itching to see how much more powerful the car feels on the meth!

Cool! Mine goes in Monday for lower pulley, 2" headers and ported throttle body. See what that does and go from there. Cant wait to see how the meth works on yours.

[Sinester17]

Originally Posted by TDS

Cool! Mine goes in Monday for lower pulley, 2" headers and ported throttle body. See what that does and go from there. Cant wait to see how the meth works on yours.

I’m interested as well. I’ve yet to see a zl1 use the lid for JUST meth. I’m sure there may be a vette by now. But I haven’t came across it yet.