[KyBoy]

Originally Posted by NWFifty

Anyone using the powerstop z26 brake pads? Any complaints?
Mike R.

I have them on both Camaros. No complaints and 80% less brake dust.

Heath

[NWFifty]

Originally Posted by KyBoy

I have them on both Camaros. No complaints and 80% less brake dust.

Heath

Thanks Heath, very helpful! Going to order a set through rockauto.
Mike R.

[Homer2]

Originally Posted by NWFifty

Anyone using the powerstop z26 brake pads? Any complaints?
Mike R.

did the pads and drilled/slotted rotors. I am angry.


Angry I waited so long to do it.. great mod.

[z28deuce]

Originally Posted by NWFifty

Thanks Heath, very helpful! Going to order a set through rockauto.
Mike R.

Very happy with mine. Make sure you double-check the part numbers with the Powerstop website. Amazon and some of the other retailers were showing the wrong set for one of the axles.

Sent from my HTC6545LVW using Tapatalk

[z28deuce]

Originally Posted by z28deuce

Very happy with mine. Make sure you double-check the part numbers with the Powerstop website. Amazon and some of the other retailers were showing the wrong set for one of the axles.

Sent from my HTC6545LVW using Tapatalk

Just checked and Rock Auto is showing the wrong ones, too. On the front you need the 1474A set, not 1474. Look at the Powerstop website and research a few of the threads on it. Heath and the other guys who've installed them may jump in, too. I think we all weren't sure which ones were right at first.

Sent from my HTC6545LVW using Tapatalk

[KyBoy]

Originally Posted by z28deuce

Just checked and Rock Auto is showing the wrong ones, too. On the front you need the 1474A set, not 1474. Look at the Powerstop website and research a few of the threads on it. Heath and the other guys who've installed them may jump in, too. I think we all weren't sure which ones were right at first.

Sent from my HTC6545LVW using Tapatalk

Front : Z26-1474A

Rear : Z26-1718

Heath

[NWFifty]

Originally Posted by z28deuce

Just checked and Rock Auto is showing the wrong ones, too. On the front you need the 1474A set, not 1474. Look at the Powerstop website and research a few of the threads on it. Heath and the other guys who've installed them may jump in, too. I think we all weren't sure which ones were right at first.

Sent from my HTC6545LVW using Tapatalk

Thanks, good to know. I noticed that also because I got the part numbers on powerstop's website and then amazon told me it wouldnt fit my car. Guessing these retailers havent associated the 17's with that part # yet?

Mike R.

[NWFifty]

Originally Posted by KyBoy

Front : Z26-1474A

Rear : Z26-1718

Heath

[Wolfco13]

Originally Posted by z28deuce

Just checked and Rock Auto is showing the wrong ones, too. On the front you need the 1474A set, not 1474. Look at the Powerstop website and research a few of the threads on it. Heath and the other guys who've installed them may jump in, too. I think we all weren't sure which ones were right at first.

Sent from my HTC6545LVW using Tapatalk

+1
The only fitment issue I noticed was that the new spring clips where slightly different. The OEM clips matched the contours of the OEM pins that get re-used, so I re-used the clips. It seemed to me that this contouring was designed to keep the spring clips centered.

[Wolfco13]

Originally Posted by Nated421

Does anyone have the zl1 side rockers on their fifty? I just ordered them and would like to see a pic on our cars

Originally Posted by FiftySS

Would love to see pics as well.

Originally Posted by Soleil

Me too, I just ordered from C7

I remember someone teased us with closeups of his carbon-fiber wrapped ground effects, and never posted any full view shots.
IF I where to go that route, I would wrap the heat extractors, the front DRL/vent trim, the... I think I will just go NGM.

[misterbill77]

Originally Posted by KyBoy

I have them on both Camaros. No complaints and 80% less brake dust.

Heath

Fronts are Z26-1474 or Z26-1474a? Seems to be conflicting information out there... Which ones did you get?

[misterbill77]

Guys & Gals, this look right for a caliper touch up pen? ACDelco 19332027 - https://www.amazon.com/ACDelco-19332.../dp/B01E9AYKN4

Thinking ceramic coat in the next couple weeks - want this on-hand so detailer can use if needed... Going to have wheels/calipers done as well as body.

[KyBoy]

Originally Posted by misterbill77

Fronts are Z26-1474 or Z26-1474a? Seems to be conflicting information out there... Which ones did you get?

Front : Z26-1474A

Rear : Z26-1718

Heath

[KyBoy]

Originally Posted by misterbill77

Guys & Gals, this look right for a caliper touch up pen? ACDelco 19332027 - https://www.amazon.com/ACDelco-19332.../dp/B01E9AYKN4

Thinking ceramic coat in the next couple weeks - want this on-hand so detailer can use if needed... Going to have wheels/calipers done as well as body.

Here ya go for caliper paint.

Heath