ZL1 Air Ride - Page 2

austriajohn · 11-26-2017, 02:30 AM

Done finally and I like the way it turned out.

ORLYHPD · 11-26-2017, 03:41 AM

Looks so good bro. Are these custom just to the zl1, or is it for the ss and above, I to have a zl1. Can u post the part number for me. Thank u

Soleil · 11-26-2017, 05:32 AM

That looks awesome

Gunkk · 11-26-2017, 07:23 AM

Wow that's low. Any rubbing up front?

Looks great!

austriajohn · 11-26-2017, 11:30 AM

Quote:

Originally Posted by ORLYHPD

Looks so good bro. Are these custom just to the zl1, or is it for the ss and above, I to have a zl1. Can u post the part number for me. Thank u

Bought it from Phastek. Its the BR Racing coilover kit. They work for SS and above. Everything fit perfect. Had a few issues on the install because it was the first time for this car. Did one side first which took hours. Then once we figured it out, the other side took an hour for front and back.

kttxz06 · 11-26-2017, 11:32 AM

Damn, that's low. Looks good. How much did you lower it? I'm waiting on my wheels to come in, but I'm only going .75 in front and 1 inch in the rear as I'm already sitting pretty flush.

austriajohn · 11-26-2017, 11:33 AM

Quote:

Originally Posted by Gunkk

Wow that's low. Any rubbing up front?

Looks great!

No rubbing. After the install we didn't really quite know how low the car would be so I set it at the lowest setting which was really low and still no rubbing....at low speeds. But it was too low for me. We actually raised the car up another half inch to get it at this height. Car rides well with the coilovers, you just have to adjust the settings on them to your driving liking.

austriajohn · 11-26-2017, 11:37 AM

Quote:

Originally Posted by kttxz06

Damn, that's low. Looks good. How much did you lower it? I'm waiting on my wheels to come in, but I'm only going .75 in front and 1 inch in the rear as I'm already sitting pretty flush.

From the 2018 stock height, the full drop came to 1.5" all around. I say that because the 2018 is lower than the 2017 out of the factory.

kttxz06 · 11-26-2017, 11:42 AM

Quote:

Originally Posted by austriajohn

From the 2018 stock height, the full drop came to 1.5" all around. I say that because the 2018 is lower than the 2017 out of the factory.

Nice. You going with any aftermarket wheels?

Btw, you got the best color.

austriajohn · 11-26-2017, 12:05 PM

Quote:

Originally Posted by kttxz06

Nice. You going with any aftermarket wheels?

Btw, you got the best color.

You know what...you're right. We did get the best color.

Not sure about the wheels. Haven't found one that I really like yet. Although, the stock ZL1 wheels are nice. It's a great set up. Still looking. Your car looks great man.

VcrusaderV · 11-28-2017, 01:17 PM

That looks perfect. If I could get that low and have the ability to raise it back up with the push of a button, I’d be all over it.

austriajohn · 11-28-2017, 01:20 PM

You can with the KW HLS. Coilovers with hydraulic lift built in it.

Quote:

Originally Posted by VcrusaderV

That looks perfect. If I could get that low and have the ability to raise it back up with the push of a button, I’d be all over it.

ninetres · 11-28-2017, 01:31 PM

Quote:

Originally Posted by austriajohn

From the 2018 stock height, the full drop came to 1.5" all around. I say that because the 2018 is lower than the 2017 out of the factory.

Only the early 2017s. Chevy switched to the updated Springs in early 2017. I think it’s cars built after 4/2017 have the newer springs.

chrest · 11-28-2017, 04:17 PM

damn man! that looks perfect!

11-26-2017, 02:30 AM	#15
austriajohn Drives: 2017 zl1 Join Date: Oct 2017 Location: Canyon Country Posts: 23	Done finally and I like the way it turned out. Attached Images

11-26-2017, 03:41 AM	#16
ORLYHPD C.O.T.W. 10-27-2014 Drives: 2017 zl1 Join Date: Feb 2011 Location: MIAMI Posts: 563 View My Garage	Looks so good bro. Are these custom just to the zl1, or is it for the ss and above, I to have a zl1. Can u post the part number for me. Thank u __________________ http://www.camaro5.com/forums/showthread.php?t=371833

11-26-2017, 05:32 AM	#17
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	That looks awesome __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)

11-26-2017, 11:32 AM	#20
kttxz06 Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016 Location: Katy Posts: 2,104	Damn, that's low. Looks good. How much did you lower it? I'm waiting on my wheels to come in, but I'm only going .75 in front and 1 inch in the rear as I'm already sitting pretty flush. __________________ There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.

11-28-2017, 01:17 PM	#25
VcrusaderV Drives: 2018 ZL-1 Join Date: Aug 2009 Location: Clarksville, TN Posts: 362 View My Garage	That looks perfect. If I could get that low and have the ability to raise it back up with the push of a button, I’d be all over it. __________________ 2010 2SS Camaro (sold) 2010 ZL 427 Camaro (sold) 2012 ZL-1 Camaro (sold) 2018 ZL-1 Camaro

11-26-2017, 07:23 AM	#18
Gunkk Thank you Al Oppenheiser! Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017 Location: Sarasota, FL Posts: 5,156 View My Garage	Wow that's low. Any rubbing up front? Looks great!

11-28-2017, 04:17 PM	#28
chrest Drives: 2017 Camaro 2SS Join Date: Mar 2017 Location: Portland/Vancouver Posts: 410	damn man! that looks perfect! __________________ 2017 NGM 2SS NPP M6 MRC Vortech SC, 2" TSP LT No Cats, Borla X, Eibach, Hurst shifter 603hp/547tq

User Name		Remember Me?
Password