11-23-2017, 03:18 PM | #1 |
Drives: 2017 A10 ZL1 Join Date: Apr 2013
Location: Jupiter, Fl
Posts: 483
|
Zl1 1le part numbers
Does anyone have the link to the thread with all the zl1 1le part numbers posted? I know it exists somewhere but I couldn't find it in the search. I'm looking for all of the part numbers for the bolts/retainers and all the body pieces.
__________________
2017 Camaro ZL1 Coupe Black |A10|PDR|NAV|
|
11-24-2017, 10:14 AM | #2 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,349
|
It's me..
2 dive planes or kanards L & R 2 bezels L and R 1 lower spoiler or splitter 2 winglets on the end of splitter 1 upper grill 1 lower grill Clips or plastic parts that push through to hold dive planes 6 screws to hold on winglets to end of spoiler 6 inserts called nuts but plastic inserts that push into lower splitter for the 6 bolts to attach winglets Reuse your lower soft rubber parts on bottom of splitter. No need for a new one will need to drill old rivet from old one. I gave my template to a friend for dive planes.. You also have a choice make a hole in fascia to attach the winglets into the fascia or trim tab off. The tab pushes through the fascia and same clips from dive planes hold it on.. I trimmed mine hit 150 many times no trunck failed or winglets failure yet.. was windy out to I have extra set dive planes and some hard ware I'm not going to use.. I was going to cover mine in carbon fiber but not going to I am going to do mirrors in cf if I can find some cheaper than 150 used lol
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
11-24-2017, 12:42 PM | #3 | |
@zle_blackwing
Drives: 2018 ZL1 1LE Join Date: Mar 2017
Location: S OC
Posts: 1,390
|
Quote:
__________________
2018 ZL1 1LE - Red Hot, Nav, PDR
Last edited by ZL1 1LE; 12-09-2017 at 01:38 PM. |
|
11-24-2017, 12:55 PM | #4 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,349
|
Yes dive planes and the lower spoiler winglets tabs
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
11-24-2017, 10:03 PM | #5 |
Here...
|
|
12-04-2017, 10:59 AM | #6 |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
How much did this mod cost? Do you actually have to replace the stock ZL1 splitter or just add the winglets?
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
12-04-2017, 11:17 AM | #7 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,349
|
You have to replace the splitter the 1le splitter is bigger
120 for splitter 50 ea winglets 50 ea bezels 50 each dive planes 60 grill upper 80 grill Lower 2800 rear wing
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
12-04-2017, 12:24 PM | #8 | |
Drives: 2018 ZL1 A10 Join Date: May 2012
Location: British Columbia, Canada
Posts: 1,372
|
Quote:
THX Im sure I can double those prices for Canada
__________________
DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race
|
|
12-04-2017, 01:35 PM | #9 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,349
|
Aye?
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
12-09-2017, 01:41 PM | #10 |
@zle_blackwing
Drives: 2018 ZL1 1LE Join Date: Mar 2017
Location: S OC
Posts: 1,390
|
Well, it wasn’t just a missing clip. The part of the dive plane that the clip clips into was broken off. I imagine that someone must have walked by and hit their leg on the dive plane pretty hard.
__________________
2018 ZL1 1LE - Red Hot, Nav, PDR
|
12-09-2017, 06:41 PM | #11 |
Drives: 2016 Join Date: May 2017
Location: Northern California
Posts: 314
|
Where did you get the lower grille for $80?
|
12-09-2017, 08:28 PM | #12 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,349
|
Pries change all the time.. but i sourced parts from Gmpartsdirect.com or iamgmparts.. should of done all the parts on black friday they had a 20 off coupon. Almost pulled the trigget on 5th gen z28 wheels
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
12-17-2017, 02:47 PM | #13 |
@zle_blackwing
Drives: 2018 ZL1 1LE Join Date: Mar 2017
Location: S OC
Posts: 1,390
|
Pic of the broken dive plane and the OEM slots in the bumper.
__________________
2018 ZL1 1LE - Red Hot, Nav, PDR
|
12-17-2017, 03:04 PM | #14 |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
How difficult/easy was dive plane removal replacement?
Did you have to pull the front clip?
__________________
2018 ZL1 1LE sw/PDR
|
|
|
Post Reply
|
|
|