[Sinester17]

Originally Posted by Hellobatman

That is a good deal. They look good

Thanks! I like em

[Whippled1le]

Originally Posted by 17ZL1Camaro

I am guessing around 715 RWHP depending on dyno, tune and fueling issues. Also, be aware of heat spinning that blower that high. Should be a beast!

Could be a bit more. We have a Redline Stage 4 package on our 1LE, and are putting down 871 RWHP and 869 Ft / Lbs.

[PolynesianPowerhouse]

Originally Posted by Whippled1le

Could be a bit more. We have a Redline Stage 4 package on our 1LE, and are putting down 871 RWHP and 869 Ft / Lbs.

[Sinester17]

Originally Posted by Whippled1le

Could be a bit more. We have a Redline Stage 4 package on our 1LE, and are putting down 871 RWHP and 869 Ft / Lbs.

What all comes with your stg4 package?

[Whippled1le]

Originally Posted by Sinester17

What all comes with your stg4 package?

WHIPPLE Superchargers 2.9 Liter Positive Displacement Supercharger
1 7/8” Long Tube Stainless Steel Headers
Off Road 3” Mid-section with X pipe
Redline Custom Profiled Roller Camshaft (specs are required for build)
Redline Dual Valve Springs with Titanium Retainers, locks and keepers
Comp Cams Trunnion Roller Upgrade (removes needle bearing from stock rockers)
Manley One piece Stainless Steel “Extreme Duty” Exhaust Valves
.080” Chromoly Pushrods
Billet DOD Delete Package (New Lifters, lifter trays, modified valley cover)
MLS Head Gaskets, ARP Head Bolts
Methanol Injection System Twin Nozzle
Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration

[Sinester17]

Originally Posted by Whippled1le

WHIPPLE Superchargers 2.9 Liter Positive Displacement Supercharger
1 7/8” Long Tube Stainless Steel Headers
Off Road 3” Mid-section with X pipe
Redline Custom Profiled Roller Camshaft (specs are required for build)
Redline Dual Valve Springs with Titanium Retainers, locks and keepers
Comp Cams Trunnion Roller Upgrade (removes needle bearing from stock rockers)
Manley One piece Stainless Steel “Extreme Duty” Exhaust Valves
.080” Chromoly Pushrods
Billet DOD Delete Package (New Lifters, lifter trays, modified valley cover)
MLS Head Gaskets, ARP Head Bolts
Methanol Injection System Twin Nozzle
Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration

So my car with a Whipple basically lol

I have 2” headers but other than that, meth or the cam specs it’s the same!

I’m debating on meth or saving for a Whipple. I just know more power means new clutch

[Whippled1le]

We did a clutch upgrade, just don't have the specs on that. I think your set up is cool as hell. Dustin Whipple is a friend, so we whipple everything.

[Sinester17]

Originally Posted by Whippled1le

We did a clutch upgrade, just don't have the specs on that. I think your set up is cool as hell. Dustin Whipple is a friend, so we whipple everything.

If you could post what clutch you did go with that’d be great! I have yet to look. I don’t want too choke when I see the prices

[Sinester17]

My 305/45/17 et Street R’s should be getting delivered today and I’ll try my best to get them on tomorrow

[TDS]

Originally Posted by Sinester17

My 305/45/17 et Street R’s should be getting delivered today and I’ll try my best to get them on tomorrow

Cool

[Sinester17]

So here they are. Specs are as follows.

305/45/17 et Street R’s
Weld s71 17x11(off a c6 z06)
Lowered on afe springs.

Haven’t gotten to drive the car yet but man do they make a statement just sitting there!! I rolled the car out in the garage and I see no reason why anything would give me any trouble.

[Sinester17]

I guess my pics are just going to upload sideways now??

[Infern0]

Nice. I wanna just daily drive like that.

[mlee]

This is awesome to see.... perfect height too.