[Danny80027]

has anyone mounted 305/30ZR19 front, 325/30ZR19 Rear on a 2016 SS. I must confess, I saw these on a 2017 Zl1 1LE and the wheel set makes the Camaro look so much better. I'm thinking of ordering the an aftermarket wheel set with the same dimensions and wanted to see gather informative thoughts form the group. thanks

[Soleil]

You will not get 305 in front as the ZL1 fender is wider than the SS and in the back I believe it will rub the fender liner and it will poke out. The most important thing is the offset of the rims.

[Ryephile]

seanburr did it on his SS 1LE with ZL1 1LE wheels and tires. http://www.camaro6.com/forums/showthread.php?t=502166

Also Glamcem did it on his, with NT01's on Apex wheels.

[Soleil]

I apologize, I didn’t know that this count as “it fit” the rims are rubbing the struts.
Are the 19x11 et11 and 19x12 et41 Standard for the ZL1 and what wheel are on? Those you mentioned?

[Danny80027]

thank you gentlemen, i really appreciate. I have a 16/2SS with non MAG ride and i really want to install a more aggressive wheel/tire combo for street use only, and maintaining the factory alignment camber.

with this in mind, what wheels/tires size would you all recommend ? I love the ZL1 1LE wheel set (19") and Z28 wheels, but don't want to have any issues with mounting them on my 2016 SS.

Thanks again, appreciate all thoughts and suggestions and mounting success.

[Soleil]

Hi Danny, the most combi used is 285 front and 305 rear. But 315 even 325 are also possible. Have a look here we in the EU use more the 20” or 21” whereas You guys are more on 18”or 19”