NEW PRODUCTS, HUGE DISCOUNTS: IROC-Z Hood/Wheels/Spoiler and ZL1 Style Hoods!!! - Page 5

Corner carver · 11-07-2017, 06:52 AM

Quote:

Originally Posted by 6LE Designs

100%. We just have changed the way it mounts since SEMA. We're making a vacuum bagged carbon fiber base so that it installs in about 30 minutes to 1 hour TOTAL (including cutting your roof) and it will make the car MORE rigid (not less) and of course come with the headliner. Pre-sale pricing (to get some in cars and get pics and install videos) will be $10k installed and warrantied by us, or $9k plus shipping.

Compare that to the price of a T-Top conversion... $22k plus

Thanks for the response, this is fantastic news

Northern Sixgen · 11-07-2017, 12:45 PM

Hi, first off, thanks for making some incredible parts for our cars.

Secondly, just to clarify, I know you said that there is no drilling and that it uses existing holes, but, how do the two end pieces for the aggressive spoiler attach to the car? The center piece looks like it may use the existing holes in the trunk lid but not sure about 2 end pieces. Thanks

2K16SummitSS · 11-07-2017, 02:42 PM

Quote:

Originally Posted by Northern Sixgen

Hi, first off, thanks for making some incredible parts for our cars.

Secondly, just to clarify, I know you said that there is no drilling and that it uses existing holes, but, how do the two end pieces for the aggressive spoiler attach to the car? The center piece looks like it may use the existing holes in the trunk lid but not sure about 2 end pieces. Thanks

If it's anything like the 1LE spoiler, it's most likely double sided tape for the end pieces.

6LE Designs · 11-07-2017, 02:44 PM

^^100% correct. Uses double sided tape like factory and it does NOT come off lol. Do not try to pry it off if you ever need to remove it, you'll dent your quarters. You need to remove it with fishing line, same as an emblem, as the more you pull on properly adhered double side tape the more it grips, similar to Chinese finger traps.

PolynesianPowerhouse · 11-07-2017, 03:35 PM

Quote:

Originally Posted by 6LE Designs

Sneak peek...

The design is hot! But the colors are what really set it off! This is what Arctic Blue shouldve been.

6LE Designs · 11-07-2017, 04:11 PM

Thanks

Northern Sixgen · 11-08-2017, 12:19 PM

One last pain in the but question...The 'Copo' style hood that you offer, is it completely finished on both sides(other than primer and paint)? Is it direct fit or do I have to modify something to make it fit in place of stock hood? Do I have to use hood pins on it or is it useable with stock hood latch mechanism. I know you are busy and I appreciate you taking the time to answer my questions. Thank you. If anybody else who has this hood wants to chime in as well, I am all ears. Thank you.

6LE Designs · 11-08-2017, 03:37 PM

Quote:

Originally Posted by Northern Sixgen

One last pain in the but question...The 'Copo' style hood that you offer, is it completely finished on both sides(other than primer and paint)? Is it direct fit or do I have to modify something to make it fit in place of stock hood? Do I have to use hood pins on it or is it useable with stock hood latch mechanism. I know you are busy and I appreciate you taking the time to answer my questions. Thank you. If anybody else who has this hood wants to chime in as well, I am all ears. Thank you.

Both sides are finished and it bolts right on like OEM. Nothing to mod and no reason to use hood pins unless you like the look

Running a SEMA sale right now (since we were too busy to do it last week) so if you enter code SEMA30 at checkout you'll get 30% off (off the sale price even

).

Jeanius · 11-08-2017, 05:56 PM

Damn those wheels are tempting....

6LE Designs · 11-08-2017, 06:22 PM

Enter code SEMA30 and get 30% off to make them even more tempting

Mighunter · 11-09-2017, 09:46 AM

Quote:

Originally Posted by 6LE Designs

Enter code SEMA30 and get 30% off to make them even more tempting

Can't wait for my new hood! Get to work!! LOL

Bigdave18629 · 11-13-2017, 12:17 PM

Have the Hood in CF with window, Skorpion, and Iroc Rims all on the way....or at least on order. Hoping for an early Christmas!

This of course will mean jewelry for the wife

Lemooreace · 11-14-2017, 11:33 AM

I want the three piece spoiler in carbon fiber.

Aboynamedsue · 11-14-2017, 11:54 AM

What about the seats? :-)

11-07-2017, 12:45 PM	#58
Northern Sixgen Drives: 2016 Summit White 2SS Convertible Join Date: May 2017 Location: Saskatchewan Canada Posts: 18	Hi, first off, thanks for making some incredible parts for our cars. Secondly, just to clarify, I know you said that there is no drilling and that it uses existing holes, but, how do the two end pieces for the aggressive spoiler attach to the car? The center piece looks like it may use the existing holes in the trunk lid but not sure about 2 end pieces. Thanks __________________ Adrenaline red leather, A8, Magnetic ride control, Dual mode exhaust, Black Bowties, body colour hood vents, Sema grill, front wind splitter, black SS center caps, low gloss black wheels

11-08-2017, 12:19 PM	#63
Northern Sixgen Drives: 2016 Summit White 2SS Convertible Join Date: May 2017 Location: Saskatchewan Canada Posts: 18	One last pain in the but question...The 'Copo' style hood that you offer, is it completely finished on both sides(other than primer and paint)? Is it direct fit or do I have to modify something to make it fit in place of stock hood? Do I have to use hood pins on it or is it useable with stock hood latch mechanism. I know you are busy and I appreciate you taking the time to answer my questions. Thank you. If anybody else who has this hood wants to chime in as well, I am all ears. Thank you. __________________ Adrenaline red leather, A8, Magnetic ride control, Dual mode exhaust, Black Bowties, body colour hood vents, Sema grill, front wind splitter, black SS center caps, low gloss black wheels

11-08-2017, 05:56 PM	#65
Jeanius Drives: Blk/Blk 2018 Sierra SLT Join Date: Dec 2006 Location: Golden State Posts: 2,925	Damn those wheels are tempting.... __________________ SOLD: 2SS LS3 M6 - MGW - Dynatech LT's HF Cats - Magnaflow Street CB - ADM Race CAI - Pedders Xa Coilovers - Pfadt Sways TRADED: 2016 2SS M6

11-14-2017, 11:54 AM	#70
Aboynamedsue Drives: 2017 Camaro SS Join Date: Mar 2016 Location: Saint Louis Posts: 346	What about the seats? :-) __________________ 2017 SS manual ordered through the one and only Becky! For sale: https://www.camaro6.com/forums/showthread.php?t=612154

11-07-2017, 02:44 PM	#60
6LE Designs Drives: 2016 Camaro 2SS Join Date: Jan 2016 Location: Valley Village, CA Posts: 636	^^100% correct. Uses double sided tape like factory and it does NOT come off lol. Do not try to pry it off if you ever need to remove it, you'll dent your quarters. You need to remove it with fishing line, same as an emblem, as the more you pull on properly adhered double side tape the more it grips, similar to Chinese finger traps.

11-07-2017, 04:11 PM	#62
6LE Designs Drives: 2016 Camaro 2SS Join Date: Jan 2016 Location: Valley Village, CA Posts: 636	Thanks

11-08-2017, 06:22 PM	#66
6LE Designs Drives: 2016 Camaro 2SS Join Date: Jan 2016 Location: Valley Village, CA Posts: 636	Enter code SEMA30 and get 30% off to make them even more tempting

11-13-2017, 12:17 PM	#68
Bigdave18629 Drives: 2016 White 2SS Vert A8 Maggie S/C Join Date: Oct 2016 Location: Lodi, CA Posts: 150	Have the Hood in CF with window, Skorpion, and Iroc Rims all on the way....or at least on order. Hoping for an early Christmas! This of course will mean jewelry for the wife

11-14-2017, 11:33 AM	#69
Lemooreace Drives: 2017 Camaro 2SS, Black/Red Join Date: Mar 2017 Location: San Ramon, CA Posts: 163	I want the three piece spoiler in carbon fiber.

User Name		Remember Me?
Password