10-16-2017, 11:01 PM | #1 |
Drives: 2017 fifty camaro Join Date: May 2017
Location: Frisco
Posts: 247
|
Bolt on side skirts?
Anyone make a side skirt you attach straight on. No modding? I hate how there is a gap on the car with other skirts
|
10-19-2017, 08:16 AM | #2 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,479
|
I think your only option as of now would be the OEM ZL1 rockers.
__________________
IG: @NC_M1SS1LE
|
10-19-2017, 12:56 PM | #3 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,365
|
Those would only work with zL1 fenders though no?
Last edited by cmeJATT; 10-19-2017 at 04:27 PM. |
10-19-2017, 02:52 PM | #4 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,479
|
I have them on my 1LE, they don't fit perfectly without the ZL1 fenders but it's easy to close the small gap that's left.
__________________
IG: @NC_M1SS1LE
|
10-19-2017, 03:49 PM | #5 |
Hot Dog
Drives: '17 1SS 1LE Join Date: Feb 2016
Location: Metro Detroit
Posts: 1,937
|
Pics?
__________________
2017 "M1SS1LE" in Hyper Blue w/PDR
|
10-19-2017, 10:33 PM | #6 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,479
|
Plenty of pics of it on my IG, but I don't have any super close ups right now, I can take a few 2moro.
__________________
IG: @NC_M1SS1LE
|
10-20-2017, 08:56 AM | #7 |
Drives: 2016 Red Hot 2SS Join Date: May 2016
Location: MA
Posts: 486
|
OP, have you looked at the OEM GFX kit? I installed it DIY, you rivet a base bracket to the side panel and then side skirt locks onto it and is further riveted to the panel. Pretty tight snug fit.
|
10-20-2017, 09:09 AM | #8 |
HYPER SS
Drives: 2016 Supercharged 2SS Join Date: Feb 2014
Location: Troy OH
Posts: 1,252
|
I have ACS zl1 skirts and they fit good.
__________________
Ordered: 1/15/2016
2000 status 02/01/16 3000 status 02/29/16 3400 status 03/07/16 TPW of 03/14/16 4200 status 03/17/16 in transit! Delivered 03/23/16 2SS Hyper Blue | 6M | NPP | Mag ride | ceramic white Int. | Black out bow ties | P3 Gauge| Front splitter. | 6 pot upgraded brembo brakes. | Magnuson Supercharger/95MM pulley | Rotofab Intake | ZL1 side skirts | HRE FF04 wheels - Michelin PSS4 | ZL1 add ons rock guards and lift points. | AWE touring - resinated catback with link pipes. |
10-20-2017, 09:46 AM | #9 |
I have the C7 Carbon side skirts. They fit perfect. Right now it at paint so I do not have any pictures to show just yet.
__________________
2016 Camaro 2SS "Black Widow" |
|
10-20-2017, 06:54 PM | #10 |
Drives: 2016 Camaro SS Convertible Join Date: Jul 2017
Location: Aurora, Ontario, Canada
Posts: 18
|
Has anyone successfully put on the OEM ZL1 side skirts on an SS and if so, what mods did you have to do to the front fender?
|
10-20-2017, 07:17 PM | #11 |
Drives: 18 Colorado ZR2, 17 1LE(sold) Join Date: Aug 2013
Location: Houston
Posts: 169
|
Several threads on this. Search function should bring them up. One recently showed the "fix" to push the fenders out with washers and they looked great.
|
10-20-2017, 07:37 PM | #12 |
Drives: 2016 Camaro SS Convertible Join Date: Jul 2017
Location: Aurora, Ontario, Canada
Posts: 18
|
Tried to search but no luck. Any chance you can direct me to the “washer” thread? We tried the installation today and I’m so upset about the front fit. I figured it would be a straight bolt on
|
10-20-2017, 07:47 PM | #13 | |
Drives: 18 Colorado ZR2, 17 1LE(sold) Join Date: Aug 2013
Location: Houston
Posts: 169
|
Quote:
http://www.camaro6.com/forums/showth...&highlight=fix |
|
|
|
Post Reply
|
|
|