[Speedy1975]

If you really get 100rwhp from a slightly smaller pulley, intake, and tune I'd say Chevy left too much on the table! Good stuff none the less.

[Blackdevil77]

Wow those gains were serious! Probably the lowest baseline I've seen yet with this car, but the gains are insane. That little blower is absolutely screaming.

[Blackdevil77]

10.70 with bolt ons and tires. No specific information given, but a 10.7 with a 1.8 second 60 foot is pretty solid I think for bolt ons. A 1.6 60 foot and that would of been below a 10.5

[Blackdevil77]

Another vid

[Speedy1975]

I dunno about that guy LOL, leaving sockets on wheels and then all over the track on that 10.73 pass

[GhostZL1]

Originally Posted by Blackdevil77

10.70 with bolt ons and tires. No specific information given, but a 10.7 with a 1.8 second 60 foot is pretty solid I think for bolt ons. A 1.6 60 foot and that would of been below a 10.5

That's my good friend, He trapped 10.6 w/ a 1.6 60 foot on the first pass and another later on in the day. Mods are in the description.



Thinking I'm going to pick one of the new 1LE's up after I sell my GTR.

[newmoon]

Originally Posted by Speedy1975

If you really get 100rwhp from a slightly smaller pulley, intake, and tune I'd say Chevy left too much on the table! Good stuff none the less.

It really is amazing how easy it is to add big hp to these late model supercharged cars. Great gains for the small amount of mods.

[IneedAZ]

Originally Posted by GhostZL1

That's my good friend, He trapped 10.6 w/ a 1.6 60 foot on the first pass and another later on in the day. Mods are in the description.



Thinking I'm going to pick one of the new 1LE's up after I sell my GTR.

I couldn't tell by the video, are those DR or factory rubber?

[Ron_Robinson1]

Originally Posted by Speedy1975

I dunno about that guy LOL, leaving sockets on wheels and then all over the track on that 10.73 pass

The socket is one thing...which was a rookie movie. But all over the track at the end seems to happen to my car if im running slicks without front runners. This is actually pretty common. I couldnt tell what tires he was running, not enough info on the car.

[17CamaroZL1]

Originally Posted by IneedAZ

I couldn't tell by the video, are those DR or factory rubber?

Regarding the video of the car that left the socket on a lug, since we are talking about 2 different cars in this thread, in one of his videos he was showing his Weld wheels and MT drag radials he bought used from a friend, but this latest video, looks like all black wheels, so I don't know if he changed his setup or painted the wheels (unlikely I would think).

Pretty sure the car Cleetus drove against the Tesla is running drag radials.

[IneedAZ]

Originally Posted by 17CamaroZL1

Regarding the video of the car that left the socket on a lug, since we are talking about 2 different cars in this thread, in one of his videos he was showing his Weld wheels and MT drag radials he bought used from a friend, but this latest video, looks like all black wheels, so I don't know if he changed his setup or painted the wheels (unlikely I would think).

Pretty sure the car Cleetus drove against the Tesla is running drag radials.

Ok, i was referring to his 10.6/131mph pass.

[Can'tHave2MuchHP]

Originally Posted by 17CamaroZL1

Regarding the video of the car that left the socket on a lug, since we are talking about 2 different cars in this thread, in one of his videos he was showing his Weld wheels and MT drag radials he bought used from a friend, but this latest video, looks like all black wheels, so I don't know if he changed his setup or painted the wheels (unlikely I would think).

Pretty sure the car Cleetus drove against the Tesla is running drag radials.

Yeah that Tesla is running slicks all around and is 100% gutted. It was featured on 1320video's channel before.

[Blackdevil77]

Another vid popped up of the guy with that pass. Video only shows him run a 10.7 though, and he shows the timeslip for the 10.6 pass.

[IneedAZ]

Originally Posted by Blackdevil77

Another vid popped up of the guy with that pass. Video only shows him run a 10.7 though, and he shows the timeslip for the 10.6 pass.

That is the guy i bought my spare hood heat extractor from a couple weeks ago that i had wrapped. Seen him post on FB ZL1 site.