You are browsing camaro6 
09-28-2017, 05:52 PM
|
#1 |
 Drives: 2011 corvette Join Date: Sep 2017
Location: Winnipeg Canada
Posts: 6
|
Front licence plate
Not .specific to the ZL1 I know but the front of this car is so good looking with that big grill opening. What options are there for mounting a front plate? Anything that can be easily removed for track days.
Thanks |
|
|
|
09-28-2017, 05:55 PM
|
#2 |
 
Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
Here you go. Uses the tow hook hole for mounting.
https://zl1addons.com/products/copy-...nt=37695721537 There are also other options like the Sto N Sho mount.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq  |
|
|
|
|
09-28-2017, 09:06 PM
|
#3 | |
|
I love crepes
|
Quote:
 This is my favorite and what I run on my car. I put a hole in my plate so I could take it on and off easily for the track.
|
|
|
|
|
|
09-28-2017, 10:18 PM
|
#4 |
 
Drives: 2017 ZL1 A10 White Vert Join Date: Aug 2017
Location: Katy Tx
Posts: 151
|
I used the same STO N SHO brand that I used on my 2016 Z06, like it allot. On the 2017 ZL1, not quite as sturdy IMO, but works up to 120mph so far... you can take it off to clean or track in about 3 seconds.
It's low and but it does not really interfere with the cooling air flow. On my Z06, it was lower but never scraped or had any issues. On the ZL1, it's about 1.5" higher than the Z06. http://shop.bigmikesperformanceparts...aro-SNS101.htm |
|
|
|
|
09-29-2017, 06:54 AM
|
#5 |
           
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,622
|
I keep mine in the pocket on the back of the passenger seat. Luckily cops around here don't seem to care.
__________________
 |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
