[anjoeche]

Originally Posted by Wolvie70

Personally I would get the right offset and go 275 all around. When I need new tires if I still have the car, I will probably do this.

Will I be able to rotate this setup front to back ?

[Wolvie70]

Originally Posted by anjoeche

Will I be able to rotate this setup front to back ?

Yes, otherwise there would be no reason to do it for me. Some would say it is good for track, I don't know anything about tracks.

20x10 ET 23 all around with a 275/35/20 or 285/30/20 per PK Auto in another thread. They rears will go out to the edge of the fender, so if you don't like that look, this is not for you.

[Wolvie70]

Originally Posted by JohnCobalt

I'm sorry, I think I know what you mean now. But the OP was looking for solution so rotating can be done.

It's been a long day...

No problem, I know it is done and did not know the offset that you would use off hand. I looked it up and it is...

20x10 ET 23 all around with a 275/35/20 or 285/30/20 per PK Auto in another thread. They rears will go out to the edge of the fender, so if you don't like that look, this is not for you.