Air fuel at idle question - Page 2

1le32907 · 09-22-2017, 10:12 AM

Quote:

Originally Posted by PRAY

You should be able to re cal the sensor. Just check your trims with a scanner. The narrow band 02's are in control of everything but WOT. Normal driving should still be fine with them in control.

Yea normal and accel driving seems to read okay some times the o2 does go to 9 but i don’t feel any loss of power which makes me think the bung is not right. How to do you re cal the os wideband bung?

PRAY · 09-22-2017, 10:17 AM

Quote:

Originally Posted by 1le32907

Yea normal and accel driving seems to read okay some times the o2 does go to 9 but i don’t feel any loss of power which makes me think the bung is not right. How to do you re cal the os wideband bung?

I am not sure on the AEM. I run a LM2 with a interface. I just go into the interface and do a re cal. I am sure there is a procedure for the AEM.

1le32907 · 09-22-2017, 10:48 AM

Quote:

Originally Posted by PRAY

I am not sure on the AEM. I run a LM2 with a interface. I just go into the interface and do a re cal. I am sure there is a procedure for the AEM.

Will running methanol ruin the wideband o2 bung in the x pipe

PRAY · 09-22-2017, 10:58 AM

Quote:

Originally Posted by 1le32907

Will running methanol ruin the wideband o2 bung in the x pipe

I don't believe so. Lot's of guys have been running it regularly for a long time.

1le32907 · 09-22-2017, 11:11 AM

Quote:

Originally Posted by PRAY

I don't believe so. Lot's of guys have been running it regularly for a long time.

Okay I’ve been hearing mixed stuff that why I ask lol

Joe's_cool_1le · 09-22-2017, 11:11 AM

Here is the response I just received on AEM's forum.

1le32907 · 09-22-2017, 11:23 AM

Quote:

Originally Posted by Joe's_cool_1le

Here is the response I just received on AEM's forum.

Could we both have exhaust leaks

PRAY · 09-22-2017, 11:51 AM

Quote:

Originally Posted by Joe's_cool_1le

Here is the response I just received on AEM's forum.

I concur.

1le32907 · 09-22-2017, 11:57 AM

Aren’t our o2 sensors turned off

PRAY · 09-22-2017, 12:00 PM

Only the rears get turned off with headers. Your fronts are still in full control of the car. You would have to be in OLSD running off your WB to not use the factory fronts.

1le32907 · 09-22-2017, 12:03 PM

What is olsd

PRAY · 09-22-2017, 12:06 PM

Quote:

Originally Posted by 1le32907

What is olsd

Open Loop Speed Density.

1le32907 · 09-22-2017, 12:11 PM

Quote:

Originally Posted by PRAY

Open Loop Speed Density.

Thank you

1le32907 · 09-22-2017, 12:59 PM

Quote:

Originally Posted by Joe's_cool_1le

Here is the response I just received on AEM's forum.

Hey joe did your shop use kooks header gaskets or gm gaskets if it’s the kooks I think we may have found the issue

09-22-2017, 11:11 AM	#20
Joe's_cool_1le Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016 Location: Virginia Beach Posts: 1,319	Here is the response I just received on AEM's forum. Attached Images __________________ 2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump

09-22-2017, 12:00 PM	#24
PRAY Drives: 2016 2SS Join Date: Jul 2016 Location: Sanford NC Posts: 2,766	Only the rears get turned off with headers. Your fronts are still in full control of the car. You would have to be in OLSD running off your WB to not use the factory fronts. __________________ 2016 2SS. H/C SBE 1.37 60ft, 6.36@109.49, 9.97@136+. Nuff Said.

09-22-2017, 11:57 AM	#23
1le32907 Drives: Summit white 1le ss Join Date: Feb 2017 Location: Palm Bay, fl Posts: 574	Aren’t our o2 sensors turned off

09-22-2017, 12:03 PM	#25
1le32907 Drives: Summit white 1le ss Join Date: Feb 2017 Location: Palm Bay, fl Posts: 574	What is olsd

User Name		Remember Me?
Password