09-09-2017, 07:16 AM | #1 |
Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
|
Question for those who installed bmr toe rods.
Did your kit come with with replacement bolts for both the inner and outer toe rod bolt locations. I had to reuse all 4 stock bolts as the bolts that came with the kit were way to short to use on the inner toe rods. I have attached a picture of how i have the bolt installed on the rear of the vehicle. The second picture shoe how i currently have them installed with tge exception of not having the lockout washer installed behind the nut on the right. The first picture shows the really short bolt they sent me, that isnt long enough to install on the inner bolt location like there instructions state. Third pic just onstalled picture. Hoping bmr responds as there closed on eeekend and let me know if stock bolt is adequate for install until they send longer bolt. Also that bolt you guys sent me is shorter than the outer bolt too. Didnt use it as i figured it may be wrong bolt.
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube" |
09-09-2017, 03:28 PM | #2 |
Novice Driver
|
It's been a minute but they had an issue where my bolts were not sent with a part , may have been my toe rod. They might have given you the wrong bolts , I would wait for their response and use your stock bolts temporarily. When I didn't have the bolts I used the stock ones for a week no problem.
__________________
Modifications: BMR suspension & front brace, DSC v2 controller, ported throttle body, Rotofab intake, Rimblades rim protection (red)
|
09-09-2017, 08:56 PM | #3 |
Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
|
I just want to post a positive comment, my car is putting down the power alot better. I already had there springs, trailing arms, and control arm. I installed the toe rods and rear chassis brace today and there is a huge difference. I like it alot. Cant wait to see what track times show.
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube" |
09-12-2017, 12:04 PM | #4 |
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
Wanna find out as well these are on the "up next" list
__________________
Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N
When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
09-14-2017, 04:26 PM | #5 |
Drives: 2016 Camaro 2SS Join Date: Sep 2009
Location: Tampa, FL
Posts: 256
|
bybcous,
I apologize for the delay in responding. We are still working without power after Hurricane Irma passed through. Please contact me tomorrow and I will get the correct hardware shipped out. frank@bmrsuspension.com 813-986-9302 x114 |
09-20-2017, 04:57 PM | #6 |
Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
|
Gpt the parts today and i didnt call, thanks. Will peobaly install them this weekend if i wont need a realignment after.
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube" |
09-21-2017, 09:21 AM | #7 |
Drives: 2016 Camaro 2SS Join Date: Sep 2009
Location: Tampa, FL
Posts: 256
|
|
09-21-2017, 09:05 PM | #8 |
Drives: 2010 HD D/A, 2015 Z06, 2016 2SS Join Date: Aug 2016
Location: Central WI
Posts: 503
|
Sorry late to the party. I've got pretty much all BMR's stuff including toe rods. I actually called during install with the same question. It would be tough to use their bolts due to length. They said you could use the stock bolts and torque to spec.
The difference in the handling and launching is insane - its like a different car.
__________________
2016 Hyper Blue A8 2SS
GM Bodykit: Black MRR 017 wheels: Black OEM Blackout tail-lamps OEM SEMA Grille 35% window tint Black glow-tie BMR Suspension (Pretty much everything) ACS rear-deck spoiler Rotofab CAI Lolly-pop red rotors by Madison Powder Coating |
09-22-2017, 11:17 AM | #9 | |
Drives: 2016 Camaro 2SS Join Date: Sep 2009
Location: Tampa, FL
Posts: 256
|
Quote:
|
|
10-19-2017, 06:43 PM | #10 |
Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
|
Bmr you guys sent the bolts awhile ago but without the nuts, i plan on changing bolts this weekend, should i reuse the stock nuts? Also will i need to get anpther alignment if i an just changing the bolts out and torquing back down to your recommended spec?
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube" |
10-20-2017, 09:07 AM | #11 | |
Drives: 2016 Camaro 2SS Join Date: Sep 2009
Location: Tampa, FL
Posts: 256
|
Quote:
Best Regards, |
|
|
|
Post Reply
|
|
|