[JeromeS13]

I'm anticipating that my Borla 60606 will made up, with the use of the Kooks off-road connection pipes. If those are made to adapt to the OEM exhaust, it should work the same with the Borla midpipe, since it has OE style connections and tubing diameter. I'll just have to cut the front section off, just like I would if I had the OEM midpipe.

[jaysonstuart]

Actually this might work for what I want to do.

https://www.borla.com/products/camar...rt__60626.html

[JeromeS13]

Possibly. You'll likely need some 3" "butt" style clamps.

[jaysonstuart]

Originally Posted by JeromeS13

Possibly. You'll likely need some 3" "butt" style clamps.

Something like this?

https://www.summitracing.com/parts/s...00-1/overview/

[JeromeS13]

Originally Posted by jaysonstuart

Something like this?

https://www.summitracing.com/parts/s...00-1/overview/

Yes.

[Bow Tie Affair]

Originally Posted by jaysonstuart

Something like this?

https://www.summitracing.com/parts/s...00-1/overview/

Don't forget, you will need a tune.

[JeromeS13]

Originally Posted by Bow Tie Affair

Don't forget, you will need a tune.

For just a catback and removing the secondary cats? Some would argue the contrary...

[Bow Tie Affair]

Originally Posted by JeromeS13

For just a catback and removing the secondary cats? Some would argue the contrary...

My mistake, i did not pay enough attention and thought he was removing the primary cats.

[jaysonstuart]

Originally Posted by Bow Tie Affair

My mistake, i did not pay enough attention and thought he was removing the primary cats.

The kooks system actually has cats. I was going to use those and remove the primarys.