|
|
#1 |
![]() Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
Front LED turn signals
It annoyed me that while most of the exterior lights on the ZL1 are LED, the front turn signals are not. So I picked up some LEDs from Diode Dynamics and installed them with their resistor kits. They work pretty well and look much better than the stock bulbs. I did get the weakest brightness LED option, and I think in the future I may try a brighter version.
Click on the picture to view the video. Top is stock, bottom is LED. https://flic.kr/p/Yj6o8J ![]() **UPDATE 9/25/17** So I switched from Diode Dynamic's HP48 bulb (lowest lumens) to the next highest, the HP11. Click on the picture below and you can see video of the new ones. They are much brighter and closer to stock.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq Last edited by TheElementalCashew; 09-25-2017 at 03:11 PM. |
|
|
|
|
|
#2 | |
![]() Drives: None Join Date: May 2017
Location: Chicago, IL
Posts: 462
|
Quote:
|
|
|
|
|
|
|
#3 |
![]() Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
Sorry, with Photobucket going tits up, I've been trying to figure out embedding with Flickr. If you click on the picture I've added it will take you to the video.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq |
|
|
|
|
|
#4 |
![]() Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Are you sure top is stock and bottom LED?
|
|
|
|
|
|
#5 |
![]() Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
Yes. Like I said, I got the dimmest LED option and would probably go brighter next time. You can tell the bottom is LED by the more crisp on and off, which is what I wanted.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq |
|
|
|
|
|
#6 |
![]() Drives: Pre-production ZL1 M6 Join Date: Feb 2016
Location: Sunbelt
Posts: 531
|
What bulb is it?
|
|
|
|
|
|
#7 |
![]() Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
I got the HP48. https://www.diodedynamics.com/store/...gnal-leds-pair Sent from my iPad using Tapatalk
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq |
|
|
|
|
|
#8 |
![]() Drives: In the market Join Date: Aug 2017
Location: Texas
Posts: 10
|
I'm with you on wanting them all to be LED.
Are the lights off in the top/stock pick and on in the bottom/LED pick? |
|
|
|
|
|
#9 | |
![]() Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
Quote:
It's supposed to be a video. I can post the link if it isn't working.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq |
|
|
|
|
|
|
#10 |
![]() Drives: In the market Join Date: Aug 2017
Location: Texas
Posts: 10
|
Ah... me being dumb....
I see now. Yes, not as bright but the on/off is much more abrupt like LED and I'm sure at night the difference in brightness is less obvious. I like em. |
|
|
|
|
|
#11 |
![]() Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
So I switched from Diode Dynamic's HP48 bulb (lowest lumens) to the next highest, the HP11. Click on the picture and I have a video of the new ones. They are much brighter and closer to stock.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq |
|
|
|
|
|
#12 | |
![]() ![]() ![]() ![]() ![]() Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
Quote:
__________________
2018 ZL1 1LE sw/PDR
|
|
|
|
|
|
|
#13 |
![]() Drives: 2018 Summit White ZL1 1LE Join Date: Jun 2017
Location: Maryland
Posts: 159
|
When I spoke to Diode Dynamics, they told me the only bulbs that are not OEM LED for 2018 are the reverse lights, tag light, and rear trunk cargo light. They never mentioned the front turn signals, so maybe 2018 are LEDs?
|
|
|
|
|
|
#14 |
![]() Drives: 2017 ZL1 Join Date: Mar 2017
Location: NH
Posts: 278
|
It's possible I suppose. Perhaps someone with an '18 can confirm.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof
Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325) Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq |
|
|
|
|
|
|
|
|
Post Reply
|
|
|