Borla Catback Recall - Page 6

brutusvk · 12-08-2016, 12:24 PM

Chris is great to deal with. Very helpful.

Richkidd87 · 12-08-2016, 03:19 PM

Yes I agree Chris is very helpful. Borla is a great company.

HyperBlu2SS · 08-24-2017, 11:45 PM

I'm experiencing the same issue also. Just got the 11925CFBA + 60610 installed and have CEL code P069E, P12E8, P12F7.

Is it possible to still have initial batches of 60610 still in circulation? In any case, I need this issue resolved!

reeper · 08-25-2017, 11:14 AM

Quote:

Originally Posted by HyperBlu2SS

I'm experiencing the same issue also. Just got the 11925CFBA + 60610 installed and have CEL code P069E, P12E8, P12F7.

Is it possible to still have initial batches of 60610 still in circulation? In any case, I need this issue resolved!

The only way to know for sure is to check the AFM valves.

KyBoy · 08-25-2017, 12:13 PM

I'm about to install the 60609 on my wife's SS. Could someone be so kind as to post a photo of what the correct valves look like.

HyperBlu2SS · 08-25-2017, 02:38 PM

I've been looking around the web, I'm wondering if this is what the holes should looks like?

Can you post a picture of your valves since they are not yet installed? Have to take a picture looking into the pipe.I haven't checked mine yet.

KyBoy · 08-25-2017, 03:50 PM

Quote:

Originally Posted by HyperBlu2SS

I've been looking around the web, I'm wondering if this is what the holes should looks like?

Can you post a picture of your valves since they are not yet installed? Have to take a picture looking into the pipe.I haven't checked mine yet.

Mine doesn't look like that. Give me 5 minutes.

Heath

KyBoy · 08-25-2017, 03:53 PM

Best I could do.

Heath

KyBoy · 08-25-2017, 04:16 PM

Just got off the phone with a Borla tech. I described my valve hole to him and he confirmed that I have the newest design. Hole in the center...on either side of the center bar.

Heath

Lisa@Borla · 08-25-2017, 05:17 PM

Quote:

Originally Posted by HyperBlu2SS

I'm experiencing the same issue also. Just got the 11925CFBA + 60610 installed and have CEL code P069E, P12E8, P12F7.

Is it possible to still have initial batches of 60610 still in circulation? In any case, I need this issue resolved!

Hello,
We are sorry to hear that you are having an issue with your system. The specific codes you listed are not related to the the valves not having holes, we can guarantee that this problem has been corrected and x-pipes are shipping with correctly made valves. It seems like your AFM valves may be operating outside the ideal range which will cause those codes. That said, we'd be more than happy to replace this for you. Our Customer Service Manager, Chris, will be reaching out to you today.
(I received your email and passed it along to Chris so that he can contact you and make sure you are taken care of.)

Please let me know if I can be of any further assistance.

Thank you,

HyperBlu2SS · 08-25-2017, 05:26 PM

Quote:

Originally Posted by KyBoy

Just got off the phone with a Borla tech. I described my valve hole to him and he confirmed that I have the newest design. Hole in the center...on either side of the center bar.

Heath

Thanks for the pictures Heath, this really helps for verification on my side.

HyperBlu2SS · 08-25-2017, 05:27 PM

Quote:

Originally Posted by Lisa@Borla

Hello,
We are sorry to hear that you are having an issue with your system. The specific codes you listed are not related to the the valves not having holes, we can guarantee that this problem has been corrected and x-pipes are shipping with correctly made valves. It seems like your AFM valves may be operating outside the ideal range which will cause those codes. That said, we'd be more than happy to replace this for you. Our Customer Service Manager, Chris, will be reaching out to you today.
(I received your email and passed it along to Chris so that he can contact you and make sure you are taken care of.)

Please let me know if I can be of any further assistance.

Thank you,

Thanks Lisa, I appreciate the info. I look forward to the e-mail from Chris.

KyBoy · 08-25-2017, 05:42 PM

Quote:

Originally Posted by HyperBlu2SS

Thanks for the pictures Heath, this really helps for verification on my side.

My pleasure.

Heath

KyBoy · 08-25-2017, 07:30 PM

Exhaust is on, no cel yet.

Heath

08-25-2017, 12:13 PM	#75
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	I'm about to install the 60609 on my wife's SS. Could someone be so kind as to post a photo of what the correct valves look like. Attached Images __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

08-25-2017, 03:53 PM	#78
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	Best I could do. Heath __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

08-25-2017, 04:16 PM	#79
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	Just got off the phone with a Borla tech. I described my valve hole to him and he confirmed that I have the newest design. Hole in the center...on either side of the center bar. Heath __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

08-25-2017, 07:30 PM	#84
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	Exhaust is on, no cel yet. Heath __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

12-08-2016, 12:24 PM	#71
brutusvk Drives: future 2016 SS Join Date: Sep 2015 Location: Glendale, AZ Posts: 847	Chris is great to deal with. Very helpful.

12-08-2016, 03:19 PM	#72
Richkidd87 Drives: 2016 Camaro 1SS Red Hot Join Date: May 2016 Location: Memphis Posts: 282	Yes I agree Chris is very helpful. Borla is a great company.

08-24-2017, 11:45 PM	#73
HyperBlu2SS Drives: 2017 Hyper Blue 2SS Join Date: Feb 2017 Location: SF Bay Area Posts: 47	I'm experiencing the same issue also. Just got the 11925CFBA + 60610 installed and have CEL code P069E, P12E8, P12F7. Is it possible to still have initial batches of 60610 still in circulation? In any case, I need this issue resolved!

08-25-2017, 02:38 PM	#76
HyperBlu2SS Drives: 2017 Hyper Blue 2SS Join Date: Feb 2017 Location: SF Bay Area Posts: 47	I've been looking around the web, I'm wondering if this is what the holes should looks like? Can you post a picture of your valves since they are not yet installed? Have to take a picture looking into the pipe.I haven't checked mine yet.

User Name		Remember Me?
Password