[KyBoy]

Originally Posted by Kaizer_911

I still need to do this upgrade.


Sent from my iPhone using Tapatalk

Yes you do!

Originally Posted by Curr

It's a HUGE improvement in dust reduction, and no noticeable loss in stopping power (on the street).

Also, you don't *need* one of these, but it makes the job a lot easier.

Yes it does improve dust reduction! I just use a long punch, works perfect

Originally Posted by RicSimonis

Now having waited, I've got over 12k on mine. I'm thinking I'll wait a bit longer to change them out and have the rotors turned at the same time.

But on the bright side, I'll be excellent at cleaning my wheels.

Wheel cleaning professional!

Heath

[Kaizer_911]

Originally Posted by RicSimonis

FOUND ONE!!!

Only $14 at Sam's. Almost walked right by it, had to wait for some others to walk past with their cart and I looked down.....


I thought I saw that they were going to be releasing a Vert as well. Until then........

Congrats Ric!!


Sent from my iPhone using Tapatalk

[KyBoy]

Morning Club F1FTY! It's too early to be at work on a Sunday. Although it is nice to look at!

Heath

[Curr]

Originally Posted by KyBoy

The front bowtie...that would be the only way without destroying it.

Heath

Now my SS and bow-ties match.

So I just swapped out the front bow-tie with the RCC painted one and it took me about 1 minute.

You can literally pull it off with your hands. A firm grip on one edge (I started with the left edge) and slipped a trim tool under the edge, applied firm and even pressure and that sides tab popped out, and then with my hands I just slowly pulled the entire thing off. Nothing broken or scratched. New bow-tie popped right in.

Super. Simple.

Edit: I now have a set of black bow-ties I'll sell to anyone here at a deep discount, PM me.
Edit 2: Added a rear pic.

[Soleil]

Originally Posted by KyBoy

Morning Club F1FTY! It's too early to be at work on a Sunday. Although it is nice to look at!

Heath

Good morning Heath,

Are you a pro golfer?

[KyBoy]

Originally Posted by Curr

Now my SS and bow-ties match.

So I just swapped out the front bow-tie with the RCC painted one and it took me about 1 minute.

You can literally pull it off with your hands. A firm grip on one edge (I started with the left edge) and slipped a trim tool under the edge, applied firm and even pressure and that sides tab popped out, and then with my hands I just slowly pulled the entire thing off. Nothing broken or scratched. New bow-tie popped right in.

Super. Simple.

Edit: I now have a set of black bow-ties I'll sell to anyone here at a deep discount, PM me.
Edit 2: Added a rear pic.

That great info on front bowtie removal.

Originally Posted by Soleil

Good morning Heath,

Are you a pro golfer?

No sir, I'm assistant superintendent.

Heath

[camaromike77]

Originally Posted by KyBoy

Morning Club F1FTY! It's too early to be at work on a Sunday. Although it is nice to look at!

Heath

That looks like a Postcard............GORGEOUS......

[Kaizer_911]

Originally Posted by KyBoy

Morning Club F1FTY! It's too early to be at work on a Sunday. Although it is nice to look at!

Heath

Awesome view!


Sent from my iPhone using Tapatalk

[Kaizer_911]

Originally Posted by Curr

Now my SS and bow-ties match.



So I just swapped out the front bow-tie with the RCC painted one and it took me about 1 minute.



You can literally pull it off with your hands. A firm grip on one edge (I started with the left edge) and slipped a trim tool under the edge, applied firm and even pressure and that sides tab popped out, and then with my hands I just slowly pulled the entire thing off. Nothing broken or scratched. New bow-tie popped right in.



Super. Simple.



Edit: I now have a set of black bow-ties I'll sell to anyone here at a deep discount, PM me.

Edit 2: Added a rear pic.

New bow ties look good. Glad to hear it was an easy swap.


Sent from my iPhone using Tapatalk

[Martinjlm]

Originally Posted by KyBoy

Morning Club F1FTY! It's too early to be at work on a Sunday. Although it is nice to look at!

Heath

Dude! You work at a golf course? Hmmmm.......

[Martinjlm]

Originally Posted by Curr

Now my SS and bow-ties match.

So I just swapped out the front bow-tie with the RCC painted one and it took me about 1 minute.

You can literally pull it off with your hands. A firm grip on one edge (I started with the left edge) and slipped a trim tool under the edge, applied firm and even pressure and that sides tab popped out, and then with my hands I just slowly pulled the entire thing off. Nothing broken or scratched. New bow-tie popped right in.

Super. Simple.

Edit: I now have a set of black bow-ties I'll sell to anyone here at a deep discount, PM me.
Edit 2: Added a rear pic.

Very nice! Getting my tie off the front took a little more time than yours. Probably because my install tool was a little too thick to get underneath. I had to use a butter knife to wedge under it.

[Cchief]

Has anyone removed the spoiler from a 2017 SS 50th vert?

[KyBoy]

Originally Posted by Martinjlm

Dude! You work at a golf course? Hmmmm.......

Yessir, I surely do!

Heath

[Martinjlm]

Originally Posted by Martinjlm

Dude! You work at a golf course? Hmmmm.......

Originally Posted by KyBoy

Yessir, I surely do!

I knew there was something about you I liked....besides your taste in fine automobiles. Aside from my Fifty and gas and insurance for same, a lot of my $$ goes to golf courses and stores.