|
|
#1 |
![]() ![]() Drives: 17' 1SS 1LE GBA-Black Join Date: Mar 2017
Location: TLV
Posts: 883
|
Stock engine covers on Maggie?
Can the stock engine covers made to be fit on the Heartbeat?
Like to keep the stock ("be stealth") engine look as far as possible... |
|
|
|
|
|
#2 |
![]() ![]() ![]() Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
|
You could try something like this:
__________________
![]() Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC |
|
|
|
|
|
#3 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
I didn't try to refit mine, I like the way the others look and the supercharger just stands out more also.
|
|
|
|
|
|
#4 |
![]() ![]() Drives: 17' 1SS 1LE GBA-Black Join Date: Mar 2017
Location: TLV
Posts: 883
|
Thats neat on the LT4 unit you have, LibertyHill, however, I am thinking of getting the Maggie kit.
But could the stock covers made to fit? That is the question... |
|
|
|
|
|
#5 |
![]() ![]() ![]() Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
|
I relocated the cover mount posts to some very conveniently located tapped holes in the LT4 SC, and the also had to relocate two of the mounts under the cover with epoxy. Covers are also trimmed down a little on the inside edges.
__________________
![]() Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC |
|
|
|
|
|
#6 |
![]() ![]() Drives: 17' 1SS 1LE GBA-Black Join Date: Mar 2017
Location: TLV
Posts: 883
|
O.K. this is already good news to know that the covers are sort of customize-able and if you managed on the LT4 cover, there is a good potential to achieve the same on the Maggie.
If someone has already done it, it would be quite useful to get the details of the DIY |
|
|
|
|
|
|
|
|
Post Reply
|
|
|