[MR 45TH]

It's a perfect match 😎

[Garrett52]

Did you ever figure out the fan issue? Just installed mine and I'm getting the same and my aeroforce is showing 65000 degree intake temp.

[ProCharger]

Originally Posted by Garrett52

Did you ever figure out the fan issue? Just installed mine and I'm getting the same and my aeroforce is showing 65000 degree intake temp.

Check your connections on your MAF connector.
Make sure some of the pins didn't get bent.

If its really wrong, the fan will run all the time.

[Garrett52]

Originally Posted by ProCharger

Check your connections on your MAF connector.
Make sure some of the pins didn't get bent.

If its really wrong, the fan will run all the time.

The fan is running at max speed all the time. When I remove the wiring harness extension and plug the stock connection directly to the MAF sensor my gauge reads correctly.

Should there be an unused connection on the MAF extension harness provided in the kit?

[ProCharger]

Originally Posted by Garrett52

The fan is running at max speed all the time. When I remove the wiring harness extension and plug the stock connection directly to the MAF sensor my gauge reads correctly.

Should there be an unused connection on the MAF extension harness provided in the kit?

If the fan is on, then you have a major issue.

Please double check your connections, and the connector before driving car.
Otherwise you could damage the motor, since the car wouldn't know boost.

[Garrett52]

Originally Posted by ProCharger

If the fan is on, then you have a major issue.

Please double check your connections, and the connector before driving car.
Otherwise you could damage the motor, since the car wouldn't know boost.

Is the MAF harness extension that comes with the kit just an extension or does it have a plug for a remote IAT sensor?

I trailered it to the tuner. They are going to check into the harness and get back to me. I think I may have received the wrong harness, as I purchased the kit used.

[ProCharger]

Originally Posted by Garrett52

Is the MAF harness extension that comes with the kit just an extension or does it have a plug for a remote IAT sensor?

I trailered it to the tuner. They are going to check into the harness and get back to me. I think I may have received the wrong harness, as I purchased the kit used.

No ours does not, since it is not needed to "break out" the harness.
(some people do that, per their tuners wants)

So yes, you are not running our harness. And you will need to buy the separate sensors needed to complete your install.

[Garrett52]

Originally Posted by ProCharger

No ours does not, since it is not needed to "break out" the harness.
(some people do that, per their tuners wants)

So yes, you are not running our harness. And you will need to buy the separate sensors needed to complete your install.

Is it possible to purchase the correct harness from Procharger?

[ProCharger]

Originally Posted by Garrett52

Is it possible to purchase the correct harness from Procharger?

You may want to ask your tuner what he wants on these LT1's.
Some tuners will ONLY tune cars with the break out harness.

I haven't had an issue tuning them without it.
But as stated, everyone has their preferences.

Yes you can always call our main line and buy any part.

[Garrett52]

Originally Posted by ProCharger

You may want to ask your tuner what he wants on these LT1's.
Some tuners will ONLY tune cars with the break out harness.

I haven't had an issue tuning them without it.
But as stated, everyone has their preferences.

Yes you can always call our main line and buy any part.

Awesome! Thank you for your help and quick response!! I really appreciate it and can't wait to get the car back