You are browsing camaro6 
06-30-2017, 02:04 PM
|
#1 |
 Drives: 16 2ss NFG A8 Join Date: Apr 2016
Location: Bay Area
Posts: 28
|
FS: Stainless Works NPP Quad Tip Axle back
Model CA16RVMKSFC
Only a few hundred miles on the exhaust. Local shop added J-Pipes to eliminate the drone. The drone wasn’t terrible but I am sensitive to it. J-pipes will need to be welded or clamped back on once the mufflers are installed. I can also have them welded back up if the buyer prefers. They fit nicely and eliminated 100% of the drone. It was between 1500-2000 RPM Exhaust overall sounded good but a little louder than I was looking for. Retails at $1040. Asking $650 obo and buyer pays shipping. Shipping from Nor Cal 94533 |
|
|
|
07-01-2017, 09:28 PM
|
#2 |
 
|
I'm interested. Any sound clip??
Sent from my iPhone using Tapatalk |
|
|
|
|
07-01-2017, 10:51 PM
|
#3 |
      
|
Thats a horrible welding job
__________________
 |
|
|
|
|
07-01-2017, 11:32 PM
|
#4 |
  
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,495
|
Is adding the J-pipe really worth it to remove the drone? It doesn't bother me much but it is noticeable.
__________________
IG: @NC_M1SS1LE
 |
|
|
|
|
07-01-2017, 11:42 PM
|
#5 |
|
Drives: 16 2ss NFG A8 Join Date: Apr 2016
Location: Bay Area
Posts: 28
|
J-pipes removed all of the drone.
The welding job wasn't pretty but who cares? It's under the car where nobody can see and it did the job great. |
|
|
|
|
07-02-2017, 10:56 AM
|
#6 |
|
|
yea it looks bad but as long as it don't leak its all good. looks like a solid pound of extra metal though
__________________
|
|
|
|
|
07-02-2017, 09:20 PM
|
#7 |
|
Drives: 16 2ss NFG A8 Join Date: Apr 2016
Location: Bay Area
Posts: 28
|
Sold!
|
|
|
|
|
08-09-2017, 08:40 PM
|
#8 |
Drives: 2016 Hyper Blue Camaro 2SS Join Date: Aug 2016
Location: Texas - Houston- Waco
Posts: 21
|
Too bad it sold I was about to make an offer.
__________________
2016 Camaro 2SS in Hyper Blue Metallic.
|
|
|
|
|
09-04-2019, 10:25 AM
|
#9 |
 Drives: 2018 Chevrolet Camaro 2SS 1LE Join Date: Mar 2019
Location: TX
Posts: 2
|
Reviving an old thread here... I just put the Stainless Works NPP exhaust on my 6MT and it's just incredible how loud it gets in the cabin. What was the exact length on these J-pipes?
I'm hoping you also had the drone at idle and that this fixed it as well? Hopefully you're still around and can respond :-) |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
