Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > ZL1 Discussions


Phastek Performance


Post Reply
 
Thread Tools
Old 06-11-2017, 04:20 PM   #1
gilgamesh
 
Drives: 2015 Charger SRT Hellcat(732rwhp)
Join Date: Mar 2017
Location: Los Angeles, CA
Posts: 123
Ported tbody issue

No names, I'm not trying to start a bash.
I just tried installing a ported tbody on my Z and it IMMEDIATLY popped codes about the "throttle body sensor bank high and low " and the car ran like complete shit, and struggled to idle.

I checked everything and then rei stalled the stock system. Car ran fine. Rei stalled the after market--- same issue. And back and forth two more times to make sure I didn't mess up the install SOMEHOW.

Anyone have any ideas before I send it back?

UPDATE!!!!!!


So I will let you know the company in question is Katech. The reason being is that they have been outstanding with fixing the situation. When I called and reported the issue, one of their techs called me back immediately and let me know they had had a bad batch go out and overnight ed me a new, tested one, no questions asked.

Mistakes happen....customer service like this is what keeps us coming back in spite of it. Highly recommend them.

Drive-ability wise...I noticed an IMMEDIATE change in throttle response and smoothness of power delivery. To anyone that is thinking about doing either a CAI or Tbody mod I HIGHLY recommend them both. Completely changes the feel of the car.
__________________
Rides-
2015 Hellcat Charger-732rwhp/708rwtq
2017 ZL1 6M- Rotofab CAI, Katech ported Tbody

Last edited by gilgamesh; 06-14-2017 at 07:53 PM.
gilgamesh is offline   Reply With Quote
Old 06-11-2017, 04:30 PM   #2
Dethsupp0rt
 
Drives: None
Join Date: May 2017
Location: Chicago, IL
Posts: 462
Quote:
Originally Posted by gilgamesh View Post
No names, I'm not trying to start a bash.
I just tried installing a ported tbody on my Z and it IMMEDIATLY popped codes about the "throttle body sensor bank high and low " and the car ran like complete shit, and struggled to idle.

I checked everything and then rei stalled the stock system. Car ran fine. Rei stalled the after market--- same issue. And back and forth two more times to make sure I didn't mess up the install SOMEHOW.

Anyone have any ideas before I send it back?
Sounds like a bad sensor rather than anything to do with the actual porting work.

Maybe check the connection where the plug goes in and ensure there's no debris or anything in there that would prevent a good connection with the plug.

I'm sure whoever you got it from will take it back if it's defective.
Dethsupp0rt is offline   Reply With Quote
Old 06-11-2017, 04:47 PM   #3
mlee
CamaroFans.com
 
mlee's Avatar
 
Drives: ZLE & ZR2
Join Date: Oct 2008
Location: Conroe, TX
Posts: 38,040
Send it back and simply don't do this mod. At least you didn't send back the original for core yet.
__________________
mlee is offline   Reply With Quote
Old 06-11-2017, 04:50 PM   #4
mlee
CamaroFans.com
 
mlee's Avatar
 
Drives: ZLE & ZR2
Join Date: Oct 2008
Location: Conroe, TX
Posts: 38,040
Quote:
Originally Posted by 13vertss/r's View Post
Put you old one back in and see if it keeps doing it. If not, then TB. If it does, bad connection or sensor.
That's what he has done 3 or 4 times already.
__________________
mlee is offline   Reply With Quote
Old 06-11-2017, 05:03 PM   #5
13vertss

 
13vertss's Avatar
 
Drives: 2013 Camaro convertible 2SS/RS
Join Date: Sep 2014
Location: Southern NH
Posts: 1,077
Quote:
Originally Posted by mlee View Post
That's what he has done 3 or 4 times already.
That's what happens when you read most but not all the post.
13vertss is offline   Reply With Quote
Old 06-11-2017, 05:25 PM   #6
USP45
 
Drives: 2017 ZL1 A10
Join Date: Aug 2016
Location: McKinney TX
Posts: 334
Quote:
Originally Posted by gilgamesh View Post
No names, I'm not trying to start a bash.
I just tried installing a ported tbody on my Z and it IMMEDIATLY popped codes about the "throttle body sensor bank high and low " and the car ran like complete shit, and struggled to idle.

I checked everything and then rei stalled the stock system. Car ran fine. Rei stalled the after market--- same issue. And back and forth two more times to make sure I didn't mess up the install SOMEHOW.

Anyone have any ideas before I send it back?
Try installing the new one and removing the negative terminal for about 10 minutes. I know if you unplug the MAF while there is still power to the car that the ecu will pop codes..... Just a thought.
USP45 is offline   Reply With Quote
Old 06-11-2017, 08:36 PM   #7
TheRedhead
 
TheRedhead's Avatar
 
Drives: 2018 Red Hot ZL1 1LE
Join Date: May 2017
Location: Tampa, FL
Posts: 562
How much power is the ported body genuinely going to add?
TheRedhead is offline   Reply With Quote
Old 06-11-2017, 09:01 PM   #8
BSR-1

 
BSR-1's Avatar
 
Drives: 17 ZL1 M6 Black
Join Date: Oct 2009
Location: Capo Beach, Ca
Posts: 1,411
Quote:
Originally Posted by TheRedhead View Post
How much power is the ported body genuinely going to add?
http://www.camaro6.com/forums/showthread.php?t=497065
__________________
BSR-1 is offline   Reply With Quote
Old 06-11-2017, 09:02 PM   #9
gilgamesh
 
Drives: 2015 Charger SRT Hellcat(732rwhp)
Join Date: Mar 2017
Location: Los Angeles, CA
Posts: 123
Seems like the aftermarket one was over ported and is making shit go crazy at idle. I even tried swapping electronics between them to rule that out. Le sigh. Guess it goes back.
__________________
Rides-
2015 Hellcat Charger-732rwhp/708rwtq
2017 ZL1 6M- Rotofab CAI, Katech ported Tbody
gilgamesh is offline   Reply With Quote
Old 06-11-2017, 09:05 PM   #10
TheRedhead
 
TheRedhead's Avatar
 
Drives: 2018 Red Hot ZL1 1LE
Join Date: May 2017
Location: Tampa, FL
Posts: 562
Quote:
Originally Posted by BSR-1 View Post
Much obliged.
TheRedhead is offline   Reply With Quote
Old 06-12-2017, 08:44 AM   #11
soceur77
 
Drives: 17 NFG ZL1 17 GTR 22 RS6
Join Date: Apr 2017
Location: Upper Marlboro MD
Posts: 625
ummm i think you should name the company so buyers can be in the know, both companies that I know of selling the ported TB have both had good reviews, so one negative experience shouldn't matter, but lets potential buyers be aware. This is what the forums is about.
soceur77 is offline   Reply With Quote
Old 06-12-2017, 09:18 AM   #12
Dethsupp0rt
 
Drives: None
Join Date: May 2017
Location: Chicago, IL
Posts: 462
I'm just curious what the issue is, as I'm on the fence about getting one. Going to do the CAI first, then maybe the TB.

Do you have pictures of the one that is causing the issues?
Dethsupp0rt is offline   Reply With Quote
Old 06-12-2017, 09:28 AM   #13
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr
Join Date: Mar 2009
Location: Tampa
Posts: 5,111
look at above link and u will see which brand it is
__________________
Sold 2012 2LT RS 12.3@112 old setup

Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS.

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47**

Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver

Daily Driver 2021 BMW M340i Xdrive
IneedAZ is offline   Reply With Quote
Old 06-12-2017, 10:17 AM   #14
soceur77
 
Drives: 17 NFG ZL1 17 GTR 22 RS6
Join Date: Apr 2017
Location: Upper Marlboro MD
Posts: 625
Quote:
Originally Posted by IneedAZ View Post
look at above link and u will see which brand it is
Thanks!! I was silently hoping it wasn that one as I ordered last week, time will tell if this was a one of issue or what...
soceur77 is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:52 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.