|
|
#1 |
![]() Drives: 2016 Camaro SS Join Date: Jul 2016
Location: Korea
Posts: 417
|
Where is the best location of meth injector for Whipple S/C
I am planning to add a meth kit on my Whipple S/C , and supposed to put the injector at the S/C cover so that Methanol can be sprayed just after the air is squeezed, but no space for it.
so, no choice but putting the injector behind TB. Actually there are 2 ports just after TB. (one seems for inmani- pressure sensor, another is....looks like for the actuator as I can see it on the manual) Do any folks have ideas on it? |
|
|
|
|
|
#2 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
Mines in the tube after the MAF. I used the washer fluid reservoir, holds about a gallon of meth/water. I use the -20 blue washer fluid, its about 65 water and 35 meth/alky. I have the AEM and it starts spraying at 4 lbs of boost and turns off at 12. I haven't had it totally tuned yet, but hope to have it ready for the track on Wednesday. We got rained out last Saturday at the Street car takeover. Make sure you shake the 1 gallon bottle before you buy it, it should bubble up when you shake it and go away right away. If the bubble stay active for very long its got soap in it and you don't want that.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|