BOUGHT THE ZL1 OEM SIDE ROCKERS! - Page 8

wrankin · 04-25-2017, 01:19 PM

follow

Jdelgado92 · 04-25-2017, 01:24 PM

Quote:

Originally Posted by FNxR3DNECK

Yep and I got the rockers for $480 + tax from my dealer! They matched Matt's price with no shipping charge! So after all is said and done I will be in it for about $1100.

Oh okay cool, you're about $50 less than me all together. So far there's only 3 of us that I know of

You're gonna love how it looks

Jdelgado92 · 04-25-2017, 07:39 PM

I can't get over how good they look

DougCBJ · 04-25-2017, 10:38 PM

the pin striping makes the car so hard on the eyes it's hard for me to say if I like it or not.

Jdelgado92 · 04-26-2017, 02:40 PM

Quote:

Originally Posted by DougCBJ

the pin striping makes the car so hard on the eyes it's hard for me to say if I like it or not.

Let me answer that for you... you love it!

Jdelgado92 · 04-30-2017, 01:55 PM

Still working on the pieces guys, I'm a busy guy and lazy too lol anyways I feel the compliments and broken necks tripled the moment I added the zl1 rockers with the pin stripe

Summit1le1ss · 05-22-2017, 07:34 AM

is it possible to just undo the lower fender bolts and add a 1/2 spacer to the front? Anyone try this?

FNxR3DNECK · 05-22-2017, 08:50 AM

Quote:

Originally Posted by Summit1le1ss

is it possible to just undo the lower fender bolts and add a 1/2 spacer to the front? Anyone try this?

I feel like this is exactly what Gen5DIY has in mind for their "kit" for this. I finally installed the drivers side one yesterday and going to do the passenger side today weather permitting. I will look and see if it's possible to do without pulling the entire fender off. I just went with the zip tie method and while it didn't close the gap 100% it's not noticeable at all, it's almost flush maybe about 1/16-1/8" off, I could probably get it flush if I tugged on it a bit harder.

They look amazing painted satin black to match the other 1LE bits!!!

burnningice · 05-25-2017, 02:16 AM

Quote:

Originally Posted by Summit1le1ss

is it possible to just undo the lower fender bolts and add a 1/2 spacer to the front? Anyone try this?

This is what I am thinking. I have to put on a new fender and bumper on the front after a wreck. Ive been looking at the ACS stuff and it seems rather high. When I came across this, it seems like a much better solution. I don't like having ridged parts that close to the road just in case something flys up and hits the car. I may decide to buy these rockers and have them painted with the rest of the car. I will have to adjust my fender anyway, it may a reasonable option sense I'll already be in there. We shall see.

FNxR3DNECK · 05-25-2017, 08:04 AM

Finally got mine done!!! Not the best pics but I just took these really quick with my phone yesterday.

RayJay75 · 05-25-2017, 08:14 AM

looks real good @NC_M1SS1LE I like it

FNxR3DNECK · 05-25-2017, 08:52 AM

Quote:

Originally Posted by RayJay75

looks real good @NC_M1SS1LE I like it

Thanks Bro!!!

SSTony · 05-25-2017, 11:11 AM

that gap is not too bad. This is a better method than the aftermarket installs that require you to drill and add rivets to the car.

The black does not look too bad unpainted

MikeR · 05-25-2017, 11:58 AM

Looks almost perfect. Is it possible to pull the fender out ?

04-25-2017, 01:19 PM	#99
wrankin Camaros Of Northwest Ohio Drives: 2016 Black 2SS Join Date: Nov 2013 Location: Perrysburg OH Posts: 879 View My Garage	follow __________________ 2023 2SS 1LE Red Hot 2016 2SS Black / Black & Arenaline Red (sold) 2023 GMC Canyon Denali 2013 2SS / RS - AGM / Jet Black (sold) 1970 1/2 Z/28 Classic Copper / Tan (sold many years ago)

04-25-2017, 07:39 PM	#101
Jdelgado92 Drives: '16 Red hot M6 Join Date: Apr 2014 Location: south Jersey Posts: 665	I can't get over how good they look Attached Images __________________ Follow me on Instagram @julian_delgad0

04-30-2017, 01:55 PM	#104
Jdelgado92 Drives: '16 Red hot M6 Join Date: Apr 2014 Location: south Jersey Posts: 665	Still working on the pieces guys, I'm a busy guy and lazy too lol anyways I feel the compliments and broken necks tripled the moment I added the zl1 rockers with the pin stripe __________________ Follow me on Instagram @julian_delgad0

05-25-2017, 08:04 AM	#108
FNxR3DNECK Drives: 2017 SS 1LE Join Date: Mar 2016 Location: Monterey, CA Posts: 2,495	Finally got mine done!!! Not the best pics but I just took these really quick with my phone yesterday. Attached Images __________________ IG: @NC_M1SS1LE

05-25-2017, 11:11 AM	#111
SSTony Drives: SS Camaro Join Date: Jul 2009 Location: Piscataway NJ Posts: 1,782 View My Garage	that gap is not too bad. This is a better method than the aftermarket installs that require you to drill and add rivets to the car. The black does not look too bad unpainted __________________

04-25-2017, 10:38 PM	#102
DougCBJ Drives: 2016 Blue 2SS Join Date: Mar 2016 Location: Columbus, Ohio Posts: 612	the pin striping makes the car so hard on the eyes it's hard for me to say if I like it or not.

05-22-2017, 07:34 AM	#105
Summit1le1ss Drives: 2017 1ss1le Join Date: Feb 2017 Location: Jacksonville, Fl Posts: 142	is it possible to just undo the lower fender bolts and add a 1/2 spacer to the front? Anyone try this?

05-25-2017, 08:14 AM	#109
RayJay75 Z/LS Drives: 2017 MikaRay Z/LS Join Date: May 2015 Location: BuckHead Posts: 60 View My Garage	looks real good @NC_M1SS1LE I like it

05-25-2017, 11:58 AM	#112
MikeR Drives: 2017 2SS Convertible European Vers. Join Date: Aug 2016 Location: 89542 Herbrechtingen Posts: 227	Looks almost perfect. Is it possible to pull the fender out ?

User Name		Remember Me?
Password