[cleoent]

Was it a dumb question or did no one actually connect their gauge?

[Block8head]

Originally Posted by cleoent

Was it a dumb question or did no one actually connect their gauge?

You run it underneath the dash and connect it to the factory ODB port.

[cleoent]

Originally Posted by Block8head

You run it underneath the dash and connect it to the factory ODB port.

Sorry, my question was more or less on cable routing. Did you just run the cable between dash and a pillar down to odb port, or did you snake it through venting somehow?

[Block8head]

Originally Posted by cleoent

Sorry, my question was more or less on cable routing. Did you just run the cable between dash and a pillar down to odb port, or did you snake it through venting somehow?

my cable run directly below the vent to the ODB port, no need to snake the wires or make it thru anywhere. Once you removed the factory vent, you can see thru the bottom from there.

[cleoent]

Originally Posted by Block8head

my cable run directly below the vent to the ODB port, no need to snake the wires or make it thru anywhere. Once you removed the factory vent, you can see thru the bottom from there.

perfect! THANKS!

[mlee]

I think this will be my choice on the POD. I'll need 3 gauges.

scroll half way down to Camaro
http://www.ortizcustompods.com/chevrolet.html

[LesBaer]

Originally Posted by mlee

I think this will be my choice on the POD. I'll need 3 gauges.

scroll half way down to Camaro
http://www.ortizcustompods.com/chevrolet.html

That's a nice find. I'm assuming those gauges they show are just inserts as an example? I'm trying to find something that will fit the Ngauge and either sit in the driver's side defrost vent or the A-pillar. I think I only really need two and would add an air to fuel with a wide band. The Ngauge can tell you your ethanol content, boost and IAT's (I think). The Aeropods mount doesn't look like it'll fit the Ngauge.

[Corner carver]

Originally Posted by mlee

I think this will be my choice on the POD. I'll need 3 gauges.

scroll half way down to Camaro
http://www.ortizcustompods.com/chevrolet.html

Sweet find..

[GroovyJesus]

It seems like there are P3 gauges for the 6th gen, but for some reason they are not on their site.

[LesBaer]

Nice find for some people, but I'm sticking with the nGauge since you can remote tune through it and it reads E85%, which is the primary reason you'd even need a gauge. The nGauge will go in the vents as well, but the last thing I want to do is lose my primary driver's side vent. I've already got my phone mounted in close reach on the knee pad by the stick, so it blocks the majority of air.

[mlee]

Originally Posted by LesBaer

Nice find for some people, but I'm sticking with the nGauge since you can remote tune through it and it reads E85%, which is the primary reason you'd even need a gauge. The nGauge will go in the vents as well, but the last thing I want to do is lose my primary driver's side vent. I've already got my phone mounted in close reach on the knee pad by the stick, so it blocks the majority of air.

Let me know what you end up with. I'm still kicking this one around.