[JeromeS13]

Originally Posted by Sixgunsled

Mine is a 1LE also which comes with additional cooling features. Same as the ZL1. It has auxiliary coolers in the front wheel wells.

All SS's have those.

[Sixgunsled]

Originally Posted by DevBlackSS

Sweet install! got a p1sc going on with stg2 intercooler and race bov. Are you going to get professional tune?

Yes. A local shop here. Carl Messenger from Competition Auto tuned it.

[Sixgunsled]

Originally Posted by JeromeS13

All SS's have those.

the auxiliary coolers in the front wheel wells, yes. But that also helps with the cooling with the intercooler being in front.

[ProCharger]

Originally Posted by Sixgunsled

the auxiliary coolers in the front wheel wells, yes. But that also helps with the cooling with the intercooler being in front.

Its wild that the SS's have them.... yet the ZL1 does not....
(One is actually a helper intercooler on that car)

[toro1966]

Originally Posted by Sixgunsled

the auxiliary coolers in the front wheel wells, yes. But that also helps with the cooling with the intercooler being in front.

Only on coupes. The convertibles do not have the wheel well vents/coolers.

[exxit]

Six, how was fitment of the stage 2 intercooler and the AC condenser? Did you do any bracket mods to make it work?

[MR 45TH]

Originally Posted by exxit

Six, how was fitment of the stage 2 intercooler and the AC condenser? Did you do any bracket mods to make it work?

See post #43

http://www.camaro6.com/forums/showth...=491390&page=4

[exxit]

Originally Posted by MR 45TH

See post #43

http://www.camaro6.com/forums/showth...=491390&page=4

Thanks for the response brother, I notice the pic shows that it is awful close... Mine was like that too, we bent it a bit away from it, but it wasn't that much distance even after that.

Is that after you adjusted or before? After adjustment did you clear all the way or just created a bit more gap

[MR 45TH]

Originally Posted by exxit

Thanks for the response brother, I notice the pic shows that it is awful close... Mine was like that too, we bent it a bit away from it, but it wasn't that much distance even after that.

Is that after you adjusted or before? After adjustment did you clear all the way or just created a bit more gap

No problem! That's the before pic. Once I removed that bolt as pictured I was able to make a decent amount of room.

[exxit]

Originally Posted by MR 45TH

No problem! That's the before pic. Once I removed that bolt as pictured I was able to make a decent amount of room.

Did you end up putting a spacer between on the crash bar like another member did?

[MR 45TH]

Originally Posted by exxit

Did you end up putting a spacer between on the crash bar like another member did?

I did. I used washers. Its a very tight fit without it.

[exxit]

Originally Posted by MR 45TH

I did. I used washers. Its a very tight fit without it.

So just to be clear, that pic you sent with the really close hardline, that was With a washer before you bent it back, or did you go back and put spacers as well after that pic?

[MR 45TH]

Originally Posted by exxit

So just to be clear, that pic you sent with the really close hardline, that was With a washer before you bent it back, or did you go back and put spacers as well after that pic?

That picture was before I did anything. that was just following the directions. From there is when I started making adjustments.