[ERP]

Originally Posted by MRRWheelsInc

Not lowered, stock height at time of photo session.

I have an 1LT V6 and I lowered it 1" with Pro-Kit would his setup work with my car. I thought he said in a video he had to use 3mm spacers somewhere

[rdoggy]

Anyone have the exact measurements for the SS 1LE wheels? Bore, offset F&R, etc..

[7stringtheory]

Originally Posted by rdoggy

Anyone have the exact measurements for the SS 1LE wheels? Bore, offset F&R, etc..

The SS 1LE wheels are as follows:

20x10 et 20
20x11 et 43

[6thGen1leLA]

Anyone run 12" on the rear yet?

[vexss2010]

Purchasing 21" vossens with tires

Wheels are
21x9.5+25 front (tires are 265/35/21)
21x11+37 rears (305/30/21)

tires are the Pirelli P zero Nero gt

Should I have any rubbing issues at all...NOTE: My car will be lowered on the aFe springs 1.25' drop in front 1.5" in rear

[Adrian97c]

Originally Posted by vexss2010

Purchasing 21" vossens with tires

Wheels are
21x9.5+25 front (tires are 265/35/21)
21x11+37 rears (305/30/21)

tires are the Pirelli P zero Nero gt

Should I have any rubbing issues at all...NOTE: My car will be lowered on the aFe springs 1.25' drop in front 1.5" in rear

Huge drop, huge rims.... sounds like the making for all types of rubbing. But only 1 way to find out lol

Good luck & let us know how it goes, pics.



Sent from my iPhone using Tapatalk

[Tourenwagen]

Originally Posted by vexss2010

Purchasing 21" vossens with tires

Wheels are
21x9.5+25 front (tires are 265/35/21)
21x11+37 rears (305/30/21)

tires are the Pirelli P zero Nero gt

Should I have any rubbing issues at all...NOTE: My car will be lowered on the aFe springs 1.25' drop in front 1.5" in rear

Any update?

[Redlinez]

How would a 19x9.5 ET43 fit/look? Looking to go square. I guess it would not look much different in the rear since the OEM wheel is et39.

[Carlos_MRRWheelsInc]

Originally Posted by Redlinez

How would a 19x9.5 ET43 fit/look? Looking to go square. I guess it would not look much different in the rear since the OEM wheel is et39.

that off set would be to high for the front though...
if you plan on doing square set up with a 19x9.5 or 19x10 I would recommend you going with a lower off set like 25-30 et front and back
or
youll need to add spacers and longer studs for the front.
or
if you really want a rear 43et 19x9.5 wheel make sure you can get the front 19x9.5 built lower then that...
hope it makes sense

[zapdon]

TSW Nurburgrings Matte Bronze
fronts: 20x9, 20 mm offset
rears: 20 x10 35mm offset

Tires:
Nitto 555 G2
fronts:275/35/20
rears:295/35/20

[Wheel Team 6]

Originally Posted by zapdon

TSW Nurburgrings Matte Bronze
fronts: 20x9, 20 mm offset
rears: 20 x10 35mm offset

Tires:
Nitto 555 G2
fronts:275/35/20
rears:295/35/20

Looks great. I like your choice. The style, color, and sizing looks very clean. I'm not fond of a lot of the over sized or extremely wide aggressive poke on the front or rear just to try to look like a LL1 1LE like I've seen in many of the new Camaros I've looked at.

[zapdon]

Originally Posted by cooper1965

@ zapdon
I am trying to find the weight on those wheels.... Excellent choice, and stance !

Thanks. I remember seeing 23 lbs fronts and 24 rears . Rotary forged so considerably lighter than stock

[PK Auto Design]

cooper1965


Based on the fitment their about 22.87 and 23.6 lbs

[Carlos_MRRWheelsInc]

Today we got a little surprise for you, With the release of the new Camaro ZL1/1LE we also our very happy to release the New M716 by MRR Design wheels. Below is the official first picture of our M716 in a 20x10 fitted on this massive Monster Camaro SS. Enjoy

M716 available in 19x10, 19x10.5, 19x11, 20x10 and 20x11
light weight Flow form Construction ( rotary Forged )