[ADM PERFORMANCE]

Originally Posted by EDFHOBBIES

So basically its 560 rwhp car on dynos this side of I-35?

That yellow camaro 2016 car that drove across the nation before the camaro was even out stopped at ADM dynoed 413 then I had the pleasure to see it in person in houston the next day it got on a dyno here and dynoed the same exact numbers.. I'n fact every camaro I have seen in houston at a dyno night or baseline before a mod been doing 410 to 417 M6.. Actually ever since the release of the LS3.. the motors have been really consistent..

that car is hotter than most, why can't I ever pickem good.. Next time I'm car shopping I'm taking them for a day and going to the speed shop's dyno to pick the hottest 1!

I remember that day,When I got my car it mad 419 rwhp brand new with 5 miles on it. When I sold it it was 559rwhp I think.

Never the less we use the dyno to show gains from your mods, that's why we as well a most shops pre-dyno the car prior to modifying it. Showing the customer what their money got them

At dedicated its pointless to pre dyno a gtr that make 550 awhp when he is buying a 1500hp package ,Because sir we only gained 1000 hp to the tires just does not sound right.

[SGDM]

Originally Posted by Dave@DMS

All I can say is our dyno is exceptionally consistent and repeatable, and has been exactly on par with a Dynojet in terms of numbers.

I would like to bring my car down and put it on your dyno to see if there is much difference.

[SGDM]

Originally Posted by LibertyHill

Yes definitely! Going to CamaroFest??

No sir, a little too far for me. I will be at the show in San Antone in April. You going?

[Dave@DMS]

Originally Posted by SGDM

I would like to bring my car down and put it on your dyno to see if there is much difference.

We could do that. If you have easy enough exhaust access, I can put my ECM wideband in. I won't do tailpipe sniffers.

[JaxChris]

Originally Posted by ADM PERFORMANCE

At dedicated its pointless to pre dyno a gtr that make 550 awhp when he is buying a 1500hp package ,Because sir we only gained 1000 hp to the tires just does not sound right.

LOL, oh to be able to afford to receive such a phone call. Damn family, wish they didn't cost so much.

[ADM PERFORMANCE]

Originally Posted by Dave@DMS

We could do that. If you have easy enough exhaust access, I can put my ECM wideband in. I won't do tailpipe sniffers.

Yes It has a wideband bung for tuning up front

[Dave@DMS]

I'd call that a luxury. Lol. It usually sucks getting under some of these things.

[Dedicated-Matt]

Originally Posted by ADM PERFORMANCE

Yes It has a wideband bung for tuning up front

Well done Andy. Nothing sucks worse than getting burned while nearly trapped under a car.

SGDM - We'd be more than happy to make a few pulls on your car.


Mike - That exhaust is is looking really good! Can't wait to hear it.

Matt

[LibertyHill]

Originally Posted by Dedicated-Matt

Mike - That exhaust is is looking really good! Can't wait to hear it.

Matt

Finally got it away from my wife for a drive last night and it sounds great inside too! I'll get it over there soon.

Holding off on the gauges pending some dash disassembly tips on another thread, so I cut up the engine trim covers to fit the LT4. They're just sitting there for now. I need to replace 4 SC lid screws with standoffs and relocate the mounts underneath for a permanent installation:

[SGDM]

That looks good man!

[JaxChris]

Make the machined/polished detail on the top of the blower casing red to match the lettering on the covers and it will look like it was meant to be that way. =)

[Vectors2Final]

Thanks for the ride today... It's an awesome setup.


Super tempted to go this route.

[LibertyHill]

We are very happy with it!