You are browsing camaro6 
04-15-2017, 08:24 PM
|
#169 |
 Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
What are pins 17 and 18 listed as? Can u please post the entire pin list for pins 1 to 36 on this connector?
|
|
|
|
04-16-2017, 12:22 AM
|
#170 | |
 Drives: 2017 1ss1le Join Date: Feb 2017
Location: Jacksonville, Fl
Posts: 142
|
Quote:
Drivers side 17:Ground 18-23: Not Occupied Passaged side 17: Run/crank/ Ing 1 voltage 18: Battery positive voltage These are the missing one from passaged side. I have them labled, just not on tablet. |
|
|
|
|
|
04-16-2017, 02:26 AM
|
#171 |
 Drives: New : 2017 SS 1LE Old: 2012 TTRS M6 Join Date: Oct 2015
Location: Calgary/Vancouver
Posts: 810
|
Since the BCM seems to be a daunting task... is there a way to simply bypass it and wire simple switch/dial/controller?
__________________
.
. https://www.wheelwell.com/profile/56...ed9c3a/garage/ . . Project 1LE Wraith: http://www.camaro6.com/forums/showthread.php?t=474068 |
|
|
|
|
04-16-2017, 06:11 AM
|
#172 | |
|
Drives: 2017 1ss1le Join Date: Feb 2017
Location: Jacksonville, Fl
Posts: 142
|
Quote:
It may already have all the wires needed. I need to have a look at it. If someone wants to go take photos of the BCM connectors, there are 7 of them, I'll start the pinout. I won't be able to until Thursday. |
|
|
|
|
|
04-16-2017, 09:53 AM
|
#173 | |
|
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Quote:
|
|
|
|
|
|
04-16-2017, 10:04 AM
|
#174 | |
|
Drives: 2017 1ss1le Join Date: Feb 2017
Location: Jacksonville, Fl
Posts: 142
|
Quote:
One with factory AC controls, one with after market switch. So, it comes down to what is already available in the bcm and the AC controls, for that option. From what I see all the power, ground, 5v, data etc are already there and being used. No different than adding a GM accessory and have to tap in to the BCM. If someone wants to look behind ac controls and take pic of the 7 BMC connectors, I could tell ya for sure before next weekend. |
|
|
|
|
|
04-16-2017, 10:32 AM
|
#175 | |
|
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Quote:
Assuming we can disregard the memory circuits, added circuit count should be even less than this 10... |
|
|
|
|
|
04-16-2017, 11:06 AM
|
#176 | |
|
Drives: 2017 1ss1le Join Date: Feb 2017
Location: Jacksonville, Fl
Posts: 142
|
Quote:
|
|
|
|
|
|
04-16-2017, 12:37 PM
|
#177 | |
|
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Quote:
|
|
|
|
|
|
04-16-2017, 02:33 PM
|
#178 | |
|
Drives: 2017 1ss1le Join Date: Feb 2017
Location: Jacksonville, Fl
Posts: 142
|
Quote:
Driver side hated ntc sig This suck. But best I can do right now. All passenger side. |
|
|
|
|
|
04-16-2017, 03:13 PM
|
#179 |
|
Drives: '17 1SS 1LE & '15 Corvette Z06 Join Date: May 2009
Location: Olathe, KS
Posts: 669
|
Cool. It just blows my mind that seats are on a network.
|
|
|
|
|
04-16-2017, 04:02 PM
|
#180 |
 Drives: 2017 Hyper Blue 1LE Join Date: Dec 2016
Location: Albuquerque, NM
Posts: 253
|
I'm a mechanical guy but all this electrical/electronic stuff is over my head. I just hope when you techie types figure this out someone will offer a kit or a SIMPLE explanation on how to do it!
|
|
|
|
|
04-16-2017, 04:05 PM
|
#181 |
    Drives: 17 SS 1LE Join Date: Dec 2015
Location: Houston
Posts: 1,920
|
I think Gen5diy could offer a kit, if they could get a front camera to work with MyLink this should be easy.
|
|
|
|
|
04-16-2017, 04:07 PM
|
#182 | |
|
Drives: 2017 1ss1le Join Date: Feb 2017
Location: Jacksonville, Fl
Posts: 142
|
Quote:
BCM internet bus2 isn't wired. Saw on another thread a pic of his 1ss installing the amb lighting The seat mod has the ntc info in it, but where to wire into harness from(switches maybe) limited info on the AC controls. |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
