[Fonz518]

So I recently grinder my back calipers to fit my 17/11 zr1 wheels. The wheels still had 315/35 tires with good tread left. I ordered a taller tire to get the height the same as the original stock 20's. in the mean time I tested out the wheels to make sure there's no rubbing but my breaks started acting up and my stabilitrack sensor went off and told me to get it serviced. Once my new tires come in will it fix the problem or do I got to get a programmer or somthing?

[Ryephile]

Umm, grinder to your calipers?

It's not April Fools anymore, right?

[Fonz518]

Ummmmm no it's no joke, what's wrong with that? People did it to the 5th gen, do u really think Ima waste my time asking a question on here for the fun of it. Isn't this y the forums are here for?

[SR 33]

So a 315/35R17 on the rear? What was on the front?

[Fonz518]

The front are stock 20s, I know I could of went with c5 z06 18/10.5 but I'm not afraid to exsperment and plus I wanted a taller sidewall. When I put my stock wheels back on everything went back to normal.

[glenB]

Sounds like your % front to rear is off with your current 17" set-up. The fact that the lights went off when you put the stock tires back on is the hint....... IIRC the difference can be no more than 3% front to back.

You need to proof read your posts before posting and maybe you might not get questioned, but that's the breaks when dealing with brakes.

[Fonz518]

Thanks for the reply and I'll try and keep my punctuation clear.