03-28-2017, 09:58 AM | #1 |
Drives: 2017 2SS Join Date: Jun 2014
Location: United States
Posts: 636
|
Trouble - dash cam won't stay on
I installed my dash cam using the power tap found here https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I used this guide to tap into the power from the guide here. (basically, just tap into the plug for the airbag light) http://www.camaro6.com/forums/showthread.php?t=440419 So, the problem that I'm having is that the camera cycles on and off. It'll come on, start recording for a couple of seconds, then turn off. Then come back on, then turn off. And, if it stays on for any amount of time, the screen flickers regularly, and the buttons on the left side of the camera flash on and off. Any ideas what the problem is? |
03-28-2017, 10:04 AM | #2 |
|
Have you tried using it with the 12V accessory socket? Just to verify the camera isn't the problem. Will help eliminate the tap too.
__________________
Current: '17 2SS Hyper Blue, A8, MRC, NPP
Past: '99 SS Camaro A4, '73 Camaro 383 A3 "Voices in your head are not considered insider information." 3800 Status - 6/16/16 (Built!) 6000 status - 6/29/16 (Delivered!) |
03-28-2017, 10:21 AM | #3 |
Drives: 2017 2SS Join Date: Jun 2014
Location: United States
Posts: 636
|
Good call. I'll give that a try tonight.
|
03-29-2017, 08:37 AM | #4 |
Drives: 2017 2SS Join Date: Jun 2014
Location: United States
Posts: 636
|
OK, so I hooked it up with the 12v accessory socket. That works fine.
So, the issue is with either the adapter, or that the plug doesn't supply enough juice. Does anyone else have a problem running a camera off that plug? |
03-29-2017, 09:58 AM | #5 |
Camaro Fan
|
I ran mine to the front fuse box since I wanted always on. I downloaded the firmware from rexing that enabled the motion detection, so sorry can't help you.
__________________
Ordered: Garnet Red Tint coat 2016 Chevrolet Camaro 1SS, Auto, NPP
1100 Status: 8/6/15 3800 Status: 10/13/15 VIN #116519 4200 Status: 12/19/15 Delivered : 12/28/15 |
03-29-2017, 10:11 AM | #6 |
|
Have you tried checking the voltage on the plug to see if it is fluctuating? If it's not, then my guess would be bad ground.
__________________
Current: '17 2SS Hyper Blue, A8, MRC, NPP
Past: '99 SS Camaro A4, '73 Camaro 383 A3 "Voices in your head are not considered insider information." 3800 Status - 6/16/16 (Built!) 6000 status - 6/29/16 (Delivered!) |
03-29-2017, 11:03 AM | #7 |
Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,226
|
Did you use the black and purple/white wires for the taps?
|
03-29-2017, 12:43 PM | #8 |
Drives: 2017 2SS Join Date: Jun 2014
Location: United States
Posts: 636
|
|
03-30-2017, 08:22 AM | #9 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
That airbag light could be a 5v reference source if it is a LED bulb. I bet that camera needs 12v, you would be better off running the power/ground all the way down to the fuse panel.
|
03-30-2017, 08:23 AM | #10 | |
|
Quote:
Sent from my SAMSUNG-SM-G920A using Tapatalk
__________________
Current: '17 2SS Hyper Blue, A8, MRC, NPP
Past: '99 SS Camaro A4, '73 Camaro 383 A3 "Voices in your head are not considered insider information." 3800 Status - 6/16/16 (Built!) 6000 status - 6/29/16 (Delivered!) |
|
03-30-2017, 09:11 AM | #11 |
Drives: 2017 2SS Join Date: Jun 2014
Location: United States
Posts: 636
|
|
03-30-2017, 09:14 AM | #12 |
|
That's what it seems like to me. I had trouble with one of the wire taps not making a good connection for my Radar detector.
Sent from my SAMSUNG-SM-G920A using Tapatalk
__________________
Current: '17 2SS Hyper Blue, A8, MRC, NPP
Past: '99 SS Camaro A4, '73 Camaro 383 A3 "Voices in your head are not considered insider information." 3800 Status - 6/16/16 (Built!) 6000 status - 6/29/16 (Delivered!) |
|
|
Post Reply
|
|
|