Club F1FTY - Page 210

Kaizer_911 · 03-08-2017, 02:54 PM

Quote:

Originally Posted by KyBoy

Well...my rear brake pads say they will arrive Thursday now. Sucks. I did get this though!

Heath

Awesome! You will love it. It looks way better than stock, love mine.

And super easy to install.

Sent from my iPhone using Tapatalk

KyBoy · 03-08-2017, 02:57 PM

Quote:

Originally Posted by Kaizer_911

Awesome! You will love it. It looks way better than stock, love mine.

And super easy to install.

Sent from my iPhone using Tapatalk

I kept seeing all you guys with yours, had to have one.

Heath

Dysan911 · 03-08-2017, 03:52 PM

Where does one acquire one of those?

KyBoy · 03-08-2017, 04:06 PM

Quote:

Originally Posted by Dysan911

Where does one acquire one of those?

Got mine from off of ebay...Cultrag store. Can get them from your dealer as well I think.

Heath

Kaizer_911 · 03-08-2017, 04:50 PM

Quote:

Originally Posted by KyBoy

Got mine from off of ebay...Cultrag store. Can get them from your dealer as well I think.

Heath

Quote:

Originally Posted by Dysan911

Where does one acquire one of those?

ThatGMPartsGuy website
Maureen at Rodgers
Your local dealer
Cultrag
ShopChevyParts website
Etc

Sent from my iPhone using Tapatalk

KyBoy · 03-08-2017, 04:51 PM

Quote:

Originally Posted by Kaizer_911

ThatGMPartsGuy website
Maureen at Rodgers
Your local dealer
Cultrag
ShopChevyParts website
Etc

Sent from my iPhone using Tapatalk

+1

Heath

KyBoy · 03-08-2017, 06:31 PM

Thank goodness for a cordless impact...those little torx bolts were a bear. But I got it on there.

Heath

Kaizer_911 · 03-08-2017, 06:32 PM

Quote:

Originally Posted by KyBoy

Thank goodness for a cordless impact...those little torx bolts were a bear. But I got it on there.

Heath

Lol yeah. Mine died after the first one, forgot to charge the battery. It's an easy install overall but they can be a bear.

Sent from my iPhone using Tapatalk

camaromike77 · 03-09-2017, 08:15 AM

Quote:

Originally Posted by KyBoy

Thank goodness for a cordless impact...those little torx bolts were a bear. But I got it on there.

Heath

What size torx bit did you need Heath? Thanks.

KyBoy · 03-09-2017, 08:16 AM

Quote:

Originally Posted by camaromike77

What size torx bit did you need Heath? Thanks.

I didn't even look Mike, but I'll let you know soon as I get off work buddy.

Heath

Dysan911 · 03-09-2017, 01:24 PM

Hey guys,

Just an update on my quarter panel (top surface of my rear fenders).. Dimples.

So the PDR expert came out this morning and after he setup that particular light they use that helps them see the flaws. He discovered a few extra ones that I didn't even notice. Im sure the light really helps them see way more accurately than without it.

He spent a good amount of time on my drivers side and not a much on the passenger side. He was able to remove them all. He said these were likely there from the factory for all we know but he got every last one of them out and both quarter panels look flawless!. Now I just gotta keep them that way.

Was $160 out the door which I didn't think was bad at all for an Hour and a half of his time and the flawless job he did. So glad I won't have to walk past the car and have my eye catch those ugly dents anymore.

KyBoy · 03-09-2017, 01:41 PM

Quote:

Originally Posted by Dysan911

Hey guys,

Just an update on my quarter panel (top surface of my rear fenders).. Dimples.

So the PDR expert came out this morning and after he setup that particular light they use that helps them see the flaws. He discovered a few extra ones that I didn't even notice. Im sure the light really helps them see way more accurately than without it.

He spent a good amount of time on my drivers side and not a much on the passenger side. He was able to remove them all. He said these were likely there from the factory for all we know but he got every last one of them out and both quarter panels look flawless!. Now I just gotta keep them that way.

Was $160 out the door which I didn't think was bad at all for an Hour and a half of his time and the flawless job he did. So glad I won't have to walk past the car and have my eye catch those ugly dents anymore.

Awesome, glad it's taken care of!

Heath

nearwater · 03-09-2017, 01:55 PM

Quote:

Originally Posted by KyBoy

Thank goodness for a cordless impact...those little torx bolts were a bear. But I got it on there.

Heath

Lol yeah, those torx screws are in there tight!
Installing with my wrench set wasn't fun.

Kaizer_911 · 03-09-2017, 02:24 PM

Quote:

Originally Posted by Dysan911

Hey guys,

Just an update on my quarter panel (top surface of my rear fenders).. Dimples.

So the PDR expert came out this morning and after he setup that particular light they use that helps them see the flaws. He discovered a few extra ones that I didn't even notice. Im sure the light really helps them see way more accurately than without it.

He spent a good amount of time on my drivers side and not a much on the passenger side. He was able to remove them all. He said these were likely there from the factory for all we know but he got every last one of them out and both quarter panels look flawless!. Now I just gotta keep them that way.

Was $160 out the door which I didn't think was bad at all for an Hour and a half of his time and the flawless job he did. So glad I won't have to walk past the car and have my eye catch those ugly dents anymore.

Awesome and congrats!

Sent from my iPhone using Tapatalk

03-08-2017, 03:52 PM	#2929
Dysan911 Drives: 2017 50th Anniversary 2SS Join Date: Sep 2016 Location: Jacksonville, FL Posts: 930	Where does one acquire one of those? __________________ Former Ride: 17 Camaro 2SS, M6 - Fifty \| Procharger P1SC \| 3.7 Pulley \| Stage 2 IC \| Race Bypass \| DSX FF Kit \| JRE Custom E85 Flex Fuel Tune \| LT4 Fuel System \| JMS Voltage Booster \| MSD Plug Wires \| American Racing 1-7/8's LT Headers Full System Catback \| Baro Breakout Harness \| LT4 Map Sensor \| Katech Ported TB \| MMS Oil Catch Can \| 160 Thermo \| Solo Performance J-Pipes

03-08-2017, 06:31 PM	#2933
KyBoy Drives: '17 2SS H50 Join Date: Mar 2016 Location: Louisa, Ky Posts: 3,952	Thank goodness for a cordless impact...those little torx bolts were a bear. But I got it on there. Heath __________________ 2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6 1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13

03-09-2017, 01:24 PM	#2937
Dysan911 Drives: 2017 50th Anniversary 2SS Join Date: Sep 2016 Location: Jacksonville, FL Posts: 930	Hey guys, Just an update on my quarter panel (top surface of my rear fenders).. Dimples. So the PDR expert came out this morning and after he setup that particular light they use that helps them see the flaws. He discovered a few extra ones that I didn't even notice. Im sure the light really helps them see way more accurately than without it. He spent a good amount of time on my drivers side and not a much on the passenger side. He was able to remove them all. He said these were likely there from the factory for all we know but he got every last one of them out and both quarter panels look flawless!. Now I just gotta keep them that way. Was $160 out the door which I didn't think was bad at all for an Hour and a half of his time and the flawless job he did. So glad I won't have to walk past the car and have my eye catch those ugly dents anymore. __________________ Former Ride: 17 Camaro 2SS, M6 - Fifty \| Procharger P1SC \| 3.7 Pulley \| Stage 2 IC \| Race Bypass \| DSX FF Kit \| JRE Custom E85 Flex Fuel Tune \| LT4 Fuel System \| JMS Voltage Booster \| MSD Plug Wires \| American Racing 1-7/8's LT Headers Full System Catback \| Baro Breakout Harness \| LT4 Map Sensor \| Katech Ported TB \| MMS Oil Catch Can \| 160 Thermo \| Solo Performance J-Pipes

User Name		Remember Me?
Password