[ProCharger]

Originally Posted by JoeAyalaM

Hello Erik,

Help Please!

I finally received my Kit today, it came very well packed and everything seems fine. But I was checking the contents list and found almost everything listed, at least the System Parts List and I am uncertain about it being all complete.

There are some items that come listed individually but are assembled into other component, such is the case of the 4.5" SC Pulley. But before begginig installation, I need confirmation if it is all complete and ready for opperation, or where the following items should be, for they where not indivudually packed in the large box:
PCI04A-001 SC & D Pulley Washer
BO07FI-018 7/16 -20 X 1-1/4 HEX GR8-Yellow
GF020I-011 3/16" X 3/16" x 1" Key-Shipping
PDW01C-085 .085 D-SERIES Impeller Shims

What are these parts and can the system run without any of them?

Also please confirm is the "ATI FOAM ENC-9" Universal" and the "Large Convoluted Foam Piece" are only packing material.

Thank you.

All those parts you listed are already on the blower,

And yes, those other two items are just shipping materials.


Our inventory system tracks EVERYTHING.
So thus if its in the box, it MUST be on the packing list.

[JoeAyalaM]

Originally Posted by ProCharger

All those parts you listed are already on the blower,

And yes, those other two items are just shipping materials.


Our inventory system tracks EVERYTHING.
So thus if its in the box, it MUST be on the packing list.

Excelent, thank you very much, Erik.

So the modding begins!