Door striker covers - Page 5

Michigan1LTRS · 02-15-2017, 05:48 PM

Quote:

Originally Posted by diirk

These just snap on?

Quote:

Originally Posted by Glen e

yes, takes some effort.

OK, so are you putting in the inside plate in the slots first and then pushing the outside into place? I just want to be sure. I can see me snapping those tabs off. Lol

Glen e · 02-15-2017, 05:51 PM

Quote:

Originally Posted by Michigan1LTRS

OK, so are you putting in the inside plate in the slots first and then pushing the outside into place? I just want to be sure. I can see me snapping those tabs off. Lol

I Don't remember… I know you hook one side and press on with the other… Shouldn't take too long to figure it out.....

Michigan1LTRS · 02-15-2017, 06:01 PM

Quote:

Originally Posted by Glen e

I Don't remember… I know you hook one side and press on with the other… Shouldn't take too long to figure it out.....

Yes sir, got it.

Hyper16 · 02-15-2017, 06:01 PM

Quote:

Originally Posted by Michigan1LTRS

OK, so are you putting in the inside plate in the slots first and then pushing the outside into place? I just want to be sure. I can see me snapping those tabs off. Lol

I slid(?) the back in first and pressed down on the front.

Grandpawmoses · 02-15-2017, 06:06 PM

The tabs on one side are longer. Slide them in first.

Slem · 02-15-2017, 08:55 PM

Just thought I would try Order from trunk monkey and the striker were like $5.95 and the shipping to Ontario Canada was like $31.00 dollars

DougCBJ · 02-16-2017, 12:00 AM

ordered a pair from trunk monkey as well. pointless little things, but this was one thing that was in my price range hahaha

AlphaCamaro7 · 02-16-2017, 12:29 AM

Guys I can't seem to push all 4 sides in just 2 sides either the left 2 tabs or right 2 tabs but not all 4 tabs. How am I supposed to do it? Is there something in supposed to do or remove or is it just simple push in and done?

Sent from my iPhone using Tapatalk

Richard0nee · 02-16-2017, 12:37 AM

You followed this guide below? Looking at the pics I believe you slide one side in and snap the other.

diirk · 02-16-2017, 07:42 AM

^^^ I was having the same issue until I followed the instructions...lol. RTFM

Install from the inside of the car out. Get the inside "hooks" in and then slide the entire thing outboard and hook the outboard "hooks" in place. Then I pushed it back inboard to make sure everything was holding. Really easy

Haole · 02-16-2017, 08:21 AM

Quote:

Originally Posted by Slem

Just thought I would try Order from trunk monkey and the striker were like $5.95 and the shipping to Ontario Canada was like $31.00 dollars

Is this just how much it will cost to send to you? I always thought I had to pay outrageous shipping to Hawaii.

Slem · 02-16-2017, 08:32 AM

Quote:

Originally Posted by Haole

Is this just how much it will cost to send to you? I always thought I had to pay outrageous shipping to Hawaii.

Yes the $31.00 is just shipping alone

soooooooo that isn't going to happen

Michigan1LTRS · 02-16-2017, 08:36 AM

Quote:

Originally Posted by Slem

Yes the $31.00 is just shipping alone

soooooooo that isn't going to happen

Go to your local Chevy dealer, give them the part number and order two.

Wolvie70 · 02-16-2017, 09:17 AM

Quote:

Originally Posted by Slem

Yes the $31.00 is just shipping alone

soooooooo that isn't going to happen

This is their business model. Parts at or near their cost and screw you in shipping. I have thought many times to get items from them and then the shipping is outrageous.

For example I was looking for GM front splitter, great price. Shipping $180, I asked if that could be right and they offered 5% discount off shipping, so still be $170. I bought a Street Scene splitter from Stillen and I believe the charge was $8.00.

What is also cool is they have an ebay presence that is different than their other online offerings when it comes to shipping as well.

They have great prices if you are local enough to walk in.

02-16-2017, 12:29 AM	#64
AlphaCamaro7 Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016 Location: Springfield,VA Posts: 884 View My Garage	Guys I can't seem to push all 4 sides in just 2 sides either the left 2 tabs or right 2 tabs but not all 4 tabs. How am I supposed to do it? Is there something in supposed to do or remove or is it just simple push in and done? Sent from my iPhone using Tapatalk __________________ Well............ At least you tried. lol

02-16-2017, 07:42 AM	#66
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	^^^ I was having the same issue until I followed the instructions...lol. RTFM Install from the inside of the car out. Get the inside "hooks" in and then slide the entire thing outboard and hook the outboard "hooks" in place. Then I pushed it back inboard to make sure everything was holding. Really easy __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

02-15-2017, 06:06 PM	#61
Grandpawmoses Drives: 2017 2SS 50th Anniversary Join Date: Jan 2015 Location: NW AL Posts: 97	The tabs on one side are longer. Slide them in first.

02-15-2017, 08:55 PM	#62
Slem Drives: 2016 Summit White 2SS (Auto) Loaded Join Date: Jul 2016 Location: Ontario Posts: 487 View My Garage	Just thought I would try Order from trunk monkey and the striker were like $5.95 and the shipping to Ontario Canada was like $31.00 dollars

02-16-2017, 12:00 AM	#63
DougCBJ Drives: 2016 Blue 2SS Join Date: Mar 2016 Location: Columbus, Ohio Posts: 612	ordered a pair from trunk monkey as well. pointless little things, but this was one thing that was in my price range hahaha

02-16-2017, 12:37 AM	#65
Richard0nee Drives: 2016 SS M6, NPP Join Date: Apr 2016 Location: Hawthorne, CA Posts: 1,957	You followed this guide below? Looking at the pics I believe you slide one side in and snap the other.

User Name		Remember Me?
Password