Top 5 mod list? - Page 2

Aboynamedsue · 02-14-2017, 06:48 PM

Quote:

Originally Posted by Iron Lung Jimmy

There was a huge thread on Camaro5 not too long ago about a guy who was denied warranty on a failed oil pump due to having a catch can.

I have seen it. Thanks for the heads up, though.

PackersFan26 · 02-14-2017, 08:11 PM

My list is as follows:

1. 15% tints all around. Done.
2. Front splitter and side rockers (halfway done)
3. ACS Compostie Spolier
4. Black Tail lights
5. Borla S Type axle back
6. Vitesse Throttle Controller
7. ARH Headers
8. Roto Fab
9. Tune
10. Wheels,Tires, Springs

mekirk2 · 02-14-2017, 08:46 PM

I am utterly shocked that NO ONE has mentioned brake pads. I hated the factory pads - dusted horribly. Was the first thing I had to do.

ron scubadiver · 02-14-2017, 08:49 PM

Quote:

Originally Posted by mekirk2

I am utterly shocked that NO ONE has mentioned brake pads. I hated the factory pads - dusted horribly. Was the first thing I had to do.

Yeah, they are seriously dusty, but with black wheels I don't notice it so much.

BowtieRocket · 02-14-2017, 08:55 PM

Quote:

Originally Posted by Iron Lung Jimmy

There was a huge thread on Camaro5 not too long ago about a guy who was denied warranty on a failed oil pump due to having a catch can.

Didnt void my engine replacement warranty a week ago...

BowtieRocket · 02-14-2017, 08:57 PM

Quote:

Originally Posted by mekirk2

I am utterly shocked that NO ONE has mentioned brake pads. I hated the factory pads - dusted horribly. Was the first thing I had to do.

Oh yeah...thats on my list too...among many other things

vexss2010 · 02-14-2017, 10:13 PM

I've noticed that most of the lists don't have coil overs on there..Is it due to most of you have the magnetic ride? My only caveat I would have with coilovers is ruining my future plans of adding a front splitter and rockers lol especially if they are fiberglass....YIKES

mariojmoe · 02-14-2017, 11:38 PM

For me when my car was less than a month old

headers, catback exhaust, fully forged bottom end, supercharger, cam and supporting mods, upper and lower pulleys, ported lt4 heads, upgraded fuel system, ugraded clutch tune.

No I'm not kidding lol. Drove it for 2.5 weeks stock and definitely needed way more powah.

JetBlast77 · 02-15-2017, 01:05 AM

Like Aboynanedsue haven't got my new one yet but have a shopping list. Just waiting on a status 3800 next week before going on shopping spree.

First go round:
Tint
Xpel
Jack pads.
Tow hook license plate mount.
Curb alert
1LE floor mats
Splash guards

17txcamaross · 02-15-2017, 07:54 AM

I have begun my list and wouldn't change the order:

1 - Tint 15% (backs), 35% (fronts, damn you Texas), 15% (Windshield) All full ceramic
2 - Blackout (Third Brake, Side Markers and Rear Diffuser Reflectors)
3 - Sto-N-Sho front license bracket (Also, thank you Texas)
Not in TX # 3 - RotoFab CAI
4 - Borla S-Type Axle Back
5 - Eibach springs
6 - GM Front Splitter
7 - Black Tails
8 - Wheels, Tires and brake pads (No need to replace brand new equipment)

I know this list is a little longer than 5, but as of next week I will be at my first 5 mods.

Egon · 02-15-2017, 10:31 AM

Quote:

Originally Posted by vexss2010

Just got my BRAND NEW 16 summit white 2ss Camaro a couple weeks ago and trying to figure out what to do with it...I just got 20% tint all around and now trying to create a list of what to do next...I usually have "mod" fever and want to buy everything at once..BUT do not want to make this mistake like i did with my previous 8 cars that I have owned for only a yr or 2 before getting rid of it, due to being bored...

So what's your top 5 list usually when you first purchase your car? I am thinking coil overs,wheels, and tinting my tail lights for 1st year..And next yr worry about a new splitter,rockers, diffuser and exhaust...Thoughts?

There are lots of mods listed here, but what do you plan on doing with the car? What are your goals? If you are going to race or track with it, what organization (if any) are you going to race with, they may have some limitations on what can be done. Without an idea of what your goals are there is no way for anyone to make suggestions on how to get there.

vexss2010 · 02-15-2017, 11:25 AM

Quote:

Originally Posted by Egon

There are lots of mods listed here, but what do you plan on doing with the car? What are your goals? If you are going to race or track with it, what organization (if any) are you going to race with, they may have some limitations on what can be done. Without an idea of what your goals are there is no way for anyone to make suggestions on how to get there.

I will not be going to track just a daily driver to show off

camaromike77 · 02-15-2017, 11:35 AM

Quote:

Originally Posted by vexss2010

I will not be going to track just a daily driver to show off

Ditto here...........

BowtieRocket · 02-15-2017, 11:37 AM

Then you're not interested in "mods" just customizing additions

02-15-2017, 01:05 AM	#23
JetBlast77 TxAg80 Drives: '17 1SS 1LE, '00 Integra Ty R Join Date: Jan 2017 Location: W. Houston Posts: 47	Like Aboynanedsue haven't got my new one yet but have a shopping list. Just waiting on a status 3800 next week before going on shopping spree. First go round: Tint Xpel Jack pads. Tow hook license plate mount. Curb alert 1LE floor mats Splash guards __________________ Ordered Summit White 1SS 1LE 12-27-17 1100 on 1-7-17, 3000 on 1-24-17 TPW 2-20-17, 3400 on 2-7-17,3800 on 2-20-17, 6000 on 3-6-17 10 weeks .Typical drive home from work

02-15-2017, 11:37 AM	#28
BowtieRocket Drives: 2016 Camaro 2SS- M6 Join Date: Sep 2016 Location: Albuquerque Posts: 1,133 View My Garage	Then you're not interested in "mods" just customizing additions __________________ 2016 Camaro 2SS M6- Garage

02-14-2017, 08:11 PM	#16
PackersFan26 Drives: 2017 Summit White 2SS Join Date: Jan 2017 Location: Dublin, CA Posts: 546	My list is as follows: 1. 15% tints all around. Done. 2. Front splitter and side rockers (halfway done) 3. ACS Compostie Spolier 4. Black Tail lights 5. Borla S Type axle back 6. Vitesse Throttle Controller 7. ARH Headers 8. Roto Fab 9. Tune 10. Wheels,Tires, Springs

02-14-2017, 08:46 PM	#17
mekirk2 Drives: 2016 2SS Ragtop Garnet Red Join Date: Sep 2016 Location: Alabama Posts: 447	I am utterly shocked that NO ONE has mentioned brake pads. I hated the factory pads - dusted horribly. Was the first thing I had to do.

02-14-2017, 10:13 PM	#21
vexss2010 Drives: 2016 Summit White 2SS Join Date: Sep 2011 Location: Janesville,Wisconsin Posts: 1,340	I've noticed that most of the lists don't have coil overs on there..Is it due to most of you have the magnetic ride? My only caveat I would have with coilovers is ruining my future plans of adding a front splitter and rockers lol especially if they are fiberglass....YIKES

02-14-2017, 11:38 PM	#22
mariojmoe Account Suspended Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013 Location: Spring Texas Posts: 1,488	For me when my car was less than a month old headers, catback exhaust, fully forged bottom end, supercharger, cam and supporting mods, upper and lower pulleys, ported lt4 heads, upgraded fuel system, ugraded clutch tune. No I'm not kidding lol. Drove it for 2.5 weeks stock and definitely needed way more powah.

02-15-2017, 07:54 AM	#24
17txcamaross Drives: 2017 Camaro 2SS Join Date: Dec 2016 Location: Houston Posts: 469	I have begun my list and wouldn't change the order: 1 - Tint 15% (backs), 35% (fronts, damn you Texas), 15% (Windshield) All full ceramic 2 - Blackout (Third Brake, Side Markers and Rear Diffuser Reflectors) 3 - Sto-N-Sho front license bracket (Also, thank you Texas) Not in TX # 3 - RotoFab CAI 4 - Borla S-Type Axle Back 5 - Eibach springs 6 - GM Front Splitter 7 - Black Tails 8 - Wheels, Tires and brake pads (No need to replace brand new equipment) I know this list is a little longer than 5, but as of next week I will be at my first 5 mods.

User Name		Remember Me?
Password