You are browsing camaro6 
02-08-2017, 08:10 PM
|
#1 |
 
Drives: 2016 1SS Auto Join Date: Mar 2016
Location: Houston
Posts: 530
|
336 sq in 1200whp intercooler
Never run into hot iats again!
$1800 Includes powder coated top maf pipe to tb and couplers and clamps. |
|
|
|
02-08-2017, 09:42 PM
|
#2 |
|
Account Suspended
Drives: Audi S6 V8TT, Volvos XC60 & S60R Join Date: Feb 2016
Location: 5000 ft above sea level.
Posts: 414
|
Nice work, it is a beauty!
|
|
|
|
|
02-08-2017, 09:55 PM
|
#3 |
Drives: 2016 Camaro SS Join Date: Oct 2016
Location: Mount Dora, FL
Posts: 792
|
Sweet!
|
|
|
|
|
02-08-2017, 11:12 PM
|
#4 |
    Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
Whoa!! Is that mine? It is beautiful! You really can't get a feel for the size except for the pic with you in it.
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
|
|
|
|
02-08-2017, 11:17 PM
|
#5 |
|
Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
He forgot to mention it is 4.5" thick.
I am curious how bell comes up with the cfm ratings. Probably something like 1psi of pressure drop or x% of pressure drop. It isn't like at 1200hp it will just stop flowing air.
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
|
|
|
|
02-09-2017, 06:21 PM
|
#6 |
|
Drives: 2016 1SS Auto Join Date: Mar 2016
Location: Houston
Posts: 530
|
dumb dumb self left the top outlet about 3/4" long. I'm going to fix that on Sat and re-update my fixture for a better fitment. Also adding in a mounting provision for the bottom factory diff oil cooler. Lastly will have a spot for the horn to mount to as well. If you can't tell there is next to zero room for anything else hahah
This is what 336 sq in of cooling surface looks like. This core is efficient for a solid 1200whp. Should have it shipped by Wed for you  Honestly this thing is a beast, I can pretty much say you are safer with my intercooler than the factory aluminum extruded bumper support lol fun fact the end tanks are 3/16" 5052 aluminum. The weld down the length of the core takes nearly 10x 3/32nd filler rods alone! I probably used a full lb just in filler rod materials or really close to it. I think it tips the scales around 45lbs or so... I'll get a final weight on it after it is 100% on Sat |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
