[mako22]

Thanks for posting, looks awesome! Throw up a side profile if you get a chance

[Teer]

I'd like to see a low front profile picture too (trunk lid backwarads ~ rear view mirror type view)

[Interceptor9c1]

Originally Posted by AdmAnt13

Sorry guys..

So, I used a cut off wheel and grinded off the center studs and the studs closest to the center.

The outer two studs use existing SS deck lid holes.

I then used automotive 3M double sided tape (sparingly) for the center.

Yes, only two studs hold the spoiler on. The tape is more than sufficient for the rest. No water gets in even on a high pressure car wash. Best of all, I can always go back to the SS spoiler if I want to. I've had it on for over a month now with no issues.

Some crappy pics:


Here you can see the stud that is used on each side (this being the driver side obviously):

That looks like the RPI spoiler, not the Street Scene

[megaphone]

Originally Posted by Interceptor9c1

That looks like the RPI spoiler, not the Street Scene

It is, we asked him how he installed it on the SS without drilling any new holes

[AdmAnt13]

Originally Posted by megaphone

It is, we asked him how he installed it on the SS without drilling any new holes

Thank you!

Well so as not to get the thread more off topic, I'll post a new thread with pics for everyone tomorrow. It's raining and dreary here tonight so pictures are a no go right now.

[Interceptor9c1]

Originally Posted by megaphone

It is, we asked him how he installed it on the SS without drilling any new holes

Oh gotcha, missed that

[keon718nyc]

So now we can go back to the same ol' question, Who has this "STREET SCENE" spoiler installed or has it ordered already? LOL Does the company have any other pictures of different angles might be hiding around somewhere?

[1hevy_chevy]

Originally Posted by keon718nyc

So now we can go back to the same ol' question, Who has this "STREET SCENE" spoiler installed or has it ordered already? LOL Does the company have any other pictures of different angles might be hiding around somewhere?

I think this just beat every other spoiler ive seen so far..... just need to see more pics. Boy am I glad I waited!

[megaphone]

Soooo anyone have this yet?

[Corner carver]

I like this design too... Have been looking for a nice upgrade to the GM blade that I have now; this with a wicker bill and a carbon fiber wrap would fit the bill nicely

[vexss2010]

LOVE the acs spoiler BUTTTTT over $600!!??? This one isnt bad either but still over $400... Crazy how much these spoilers are..I think this year I am just going to stick with springs and wheels and next year hoping prices go down or something comes out thats more reasonable

[megaphone]

Joys of owning a car that just came out. I'm sure in years time competition will be more aggressive causing these prices to go down. Which is why I'm focusing on wheels and springs first

[smeech]

I would have pulled the trigger, but it's only held on by tape and does not reuse any of the holes.

From their customer service team:

The Street Scene 3-Piece Rear Wing is mounted with 3M Double Sided Tape. The part actually covers the factory holes if you had a factory spoiler wing installed initially. We haven’t had any calls from customer’s rear wing kits being stolen or such.

I'll probably end up with the ACS and call it a day...

[Corner carver]

Originally Posted by smeech

I would have pulled the trigger, but it's only held on by tape and does not reuse any of the holes.

From their customer service team:

The Street Scene 3-Piece Rear Wing is mounted with 3M Double Sided Tape. The part actually covers the factory holes if you had a factory spoiler wing installed initially. We haven’t had any calls from customer’s rear wing kits being stolen or such.

I'll probably end up with the ACS and call it a day...

Hmmmm... Seems odd they wouldn't at least use the GM blade spolier holes... I know it's been brought up already but, would this wing hang on at sustained high speed...with a wickerbill atached?...