Official STRIPES 6th Gen Camaro Thread - Page 14

Showguns · 12-19-2016, 04:12 PM

Quote:

Originally Posted by horizon670

Where did you buy that rear Blade ?

From RPI designs. Had to drill 3 new holes in the trunk lid, but I'm not worried about ever returning it to stock. Once it's on there it's on there.

vwlfan · 12-19-2016, 09:26 PM

White with stripes of different colors.

Jimtasteek · 12-20-2016, 04:27 AM

Can someone please tell me the width of the factory rally stripes, and the gap between them?

horizon670 · 12-20-2016, 10:02 AM

I'm not sure about the factory Stripes but these are 11.5 inches wide with one inch gap between them

Eric SS · 12-20-2016, 02:03 PM

OEM stripes

Jimtasteek · 12-20-2016, 04:05 PM

Quote:

Originally Posted by horizon670

I'm not sure about the factory Stripes but these are 11.5 inches wide with one inch gap between them

Looks stunning! Thanks for the info, think I'll go with oem style for first attempt though; anyone able to help me out with the width & gap?

Ecchi667 · 12-21-2016, 07:31 AM

Quote:

Originally Posted by Jimtasteek

Looks stunning! Thanks for the info, think I'll go with oem style for first attempt though; anyone able to help me out with the width & gap?

Measured on the spoiler, the gap is around 3.9", and the stripes are 13.7". I'd probably round those up to 4" and 14", respectively.

MANNAXMAN · 12-21-2016, 11:13 AM

Quote:

Originally Posted by Ecchi667

Measured on the spoiler, the gap is around 3.9", and the stripes are 13.7". I'd probably round those up to 4" and 14", respectively.

If you convert those measurements to mm, they are very close to 99mm and 348mm, respectively. In another thread, it was mentioned that the hardware (nuts & bolts) under the hood is metric. Based on this, it wouldn't surprise me if the OEM stripe widths are metric.

chrisvr6 · 12-21-2016, 12:12 PM

Jimtasteek · 12-22-2016, 04:02 AM

Quote:

Originally Posted by MANNAXMAN

If you convert those measurements to mm, they are very close to 99mm and 348mm, respectively. In another thread, it was mentioned that the hardware (nuts & bolts) under the hood is metric. Based on this, it wouldn't surprise me if the OEM stripe widths are metric.

Ecchi, Manna, you guys are awesome! Thanks very much for the help - I screwed up when ordering and missed off the OEM stripes so now I know how to instruct a wrap shop to help me out.

Ecchi667 · 12-22-2016, 07:10 AM

Quote:

Originally Posted by Jimtasteek

Ecchi, Manna, you guys are awesome! Thanks very much for the help - I screwed up when ordering and missed off the OEM stripes so now I know how to instruct a wrap shop to help me out.

You're welcome! Enjoy!

blazzin1 · 12-22-2016, 06:30 PM

Well, after a long wait, I finally received my stripes from 6LE Designs. Sorry for the poor lighting, I was trying to wash her up and take some pictures before it got too dark. Installation took me a while, but finally got almost everything installed. I also installed the rear blackout panel and the factory GM Grille insert stripes. I still have the matching lower door stripes, but not sure that I want to install them....might be too much. I "like" how it turned out....but for some reason....I don't "LOVE" it. Not sure why!?!?!? I think I'm going to give it some time, and see if it grows on me. Opinions welcome....

The fender hash marks are GM and came installed on the car when I bought it. The outline stripe is a dark metallic gray.

sicpuppy · 12-23-2016, 01:48 AM

This is my second white SS with blue stripes.

Jimtasteek · 12-26-2016, 01:29 PM

Quote:

Originally Posted by sicpuppy

This is my second white SS with blue stripes.

Pinstripe looks great!

12-19-2016, 09:26 PM	#184
vwlfan Drives: 2016 SS Convertible White/White Join Date: Oct 2016 Location: Western PA Posts: 8	White with stripes of different colors. Attached Images __________________ 2016 SS Convertible Summit White / Ceramic

12-20-2016, 10:02 AM	#186
horizon670 Drives: 2010 Chevy Camaro 2LT / RS / Auto Join Date: Jan 2010 Location: Rutherford, NJ Posts: 905 View My Garage	I'm not sure about the factory Stripes but these are 11.5 inches wide with one inch gap between them Attached Images Last edited by horizon670; 12-20-2016 at 10:16 AM.

12-20-2016, 02:03 PM	#187
Eric SS #becauseracecar Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015 Location: Phoenix Posts: 2,959	OEM stripes Attached Images

12-21-2016, 12:12 PM	#191
chrisvr6 Drives: suzuki Join Date: Apr 2015 Location: swiss Posts: 2,344	Attached Images

12-22-2016, 06:30 PM	#194
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Well, after a long wait, I finally received my stripes from 6LE Designs. Sorry for the poor lighting, I was trying to wash her up and take some pictures before it got too dark. Installation took me a while, but finally got almost everything installed. I also installed the rear blackout panel and the factory GM Grille insert stripes. I still have the matching lower door stripes, but not sure that I want to install them....might be too much. I "like" how it turned out....but for some reason....I don't "LOVE" it. Not sure why!?!?!? I think I'm going to give it some time, and see if it grows on me. Opinions welcome.... The fender hash marks are GM and came installed on the car when I bought it. The outline stripe is a dark metallic gray. Attached Images Last edited by blazzin1; 12-23-2016 at 09:54 AM.

12-20-2016, 04:27 AM	#185
Jimtasteek Drives: S197 Mustang Join Date: Jul 2016 Location: UK Posts: 102	Can someone please tell me the width of the factory rally stripes, and the gap between them?

12-23-2016, 01:48 AM	#195
sicpuppy Drives: White 2016 Camaro 2ss/blue stripes Join Date: Dec 2014 Location: Winston Salem NC Posts: 67	I Like Blue Stipes. This is my second white SS with blue stripes. Attached Images Last edited by sicpuppy; 12-23-2016 at 01:50 AM. Reason: spelling

User Name		Remember Me?
Password