Cam install, msd intake, kooks headers, cai, dyno tune Build-500 hp - Page 5

EFI Tuning · 12-01-2016, 12:02 PM

Quote:

Originally Posted by Nicul15

any thoughts on how much of a pita it is to do h/c vs a 4th gen?

4th gen is a breeze! GM bean counters took away one of the best features... the simple gaskets. RTV is such a pain.

bybcous · 12-01-2016, 12:07 PM

My builder said this has been a pia because of rtv sealant on timing chain cover and heads. Took him forever to remove radiator he also said. He said next time it would just pull the motor.

6spdhyperblue · 12-01-2016, 12:51 PM

Quote:

Originally Posted by EFI Tuning

4th gen is a breeze! GM bean counters took away one of the best features... the simple gaskets. RTV is such a pain.

wow not good news. with the dashboard over half the engine and those exhaust manifold bolts couldnt imagine it was worse.

bybcous · 12-01-2016, 02:02 PM

Will post a video shortly

bybcous · 12-01-2016, 02:18 PM

We couldn't run car long Because there is no coolant in there yet. I actually decided to hold off on the qtp exhaust until I drive it for a week or so and see if its loud enough for me. The car was loud ass hell

https://youtu.be/ilPAp9dFC8w

oldman · 12-01-2016, 02:30 PM

did the oil pan have to come off (wet sump system)? It HAS to come off on the Vette (dry sump).

bybcous · 12-01-2016, 02:31 PM

I will ask tommroow. I went home, it still has to be buttoned up and tuned.

oldman · 12-01-2016, 03:04 PM

I'm green with jelly!!!!!

bybcous · 12-01-2016, 03:06 PM

Quote:

Originally Posted by oldman

I'm green with jelly!!!!!

I though you had the gm heads and cam package?

BravoMyles · 12-01-2016, 03:10 PM

Nice! Can't wait to hear mine now, I'm dying!

6spdhyperblue · 12-01-2016, 04:08 PM

That sounds good can't wait for idle videos

oldman · 12-01-2016, 04:46 PM

Quote:

Originally Posted by bybcous

I though you had the gm heads and cam package?

target is summer... I have LT, offroad, tune, E85, msd, mod stock box with green filter, ported TB.

bybcous · 12-01-2016, 05:13 PM

Quote:

Originally Posted by oldman

target is summer... I have LT, offroad, tune, E85, msd, mod stock box with green filter, ported TB.

Have you been down the strip? You basically have all my mods minus cam, i also did not install my flex fuel kit and plan to return it. My tuner said he never did a flex fuel tune before, and i dont wanna be a test car.

bybcous · 12-02-2016, 10:11 AM

499.4 is dyno number

12-01-2016, 12:07 PM	#58
bybcous Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015 Location: hampton roads Posts: 2,763	My builder said this has been a pia because of rtv sealant on timing chain cover and heads. Took him forever to remove radiator he also said. He said next time it would just pull the motor. __________________ 1ss/Auto-Hyper Blue acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube"

12-01-2016, 02:02 PM	#60
bybcous Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015 Location: hampton roads Posts: 2,763	Will post a video shortly Attached Images __________________ 1ss/Auto-Hyper Blue acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube"

12-01-2016, 02:18 PM	#61
bybcous Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015 Location: hampton roads Posts: 2,763	We couldn't run car long Because there is no coolant in there yet. I actually decided to hold off on the qtp exhaust until I drive it for a week or so and see if its loud enough for me. The car was loud ass hell https://youtu.be/ilPAp9dFC8w __________________ 1ss/Auto-Hyper Blue acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube"

12-01-2016, 02:30 PM	#62
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,346	did the oil pan have to come off (wet sump system)? It HAS to come off on the Vette (dry sump). __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

12-01-2016, 02:31 PM	#63
bybcous Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015 Location: hampton roads Posts: 2,763	I will ask tommroow. I went home, it still has to be buttoned up and tuned. __________________ 1ss/Auto-Hyper Blue acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube"

12-01-2016, 03:04 PM	#64
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,346	I'm green with jelly!!!!! __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

12-01-2016, 03:10 PM	#66
BravoMyles Drives: Blue/Black 2017 1SS Join Date: Dec 2013 Location: DFW, Texas Posts: 495 View My Garage	Nice! Can't wait to hear mine now, I'm dying! __________________ 2017 1SS - Hyper Blue Metallic Heads, Cam, e85, 3600 Stall, Full bolt-ons, MBRP exhaust 2010 2SS - Summit White - SOLD CAI intake, Borla Atak axle-back (Summit xpipe resonator delete), custom ported TB, Texas Speed 1 7/8" LT Headers w/ Catless connections Instagram: bravomyles

12-01-2016, 04:08 PM	#67
6spdhyperblue Drives: 2SS 1LE Join Date: Aug 2013 Location: US Posts: 3,794	That sounds good can't wait for idle videos

12-02-2016, 10:11 AM	#70
bybcous Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015 Location: hampton roads Posts: 2,763	499.4 is dyno number __________________ 1ss/Auto-Hyper Blue acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube"

User Name		Remember Me?
Password