Drag wheels - Page 2

Tim Adams · 11-07-2016, 11:32 AM

Quote:

Originally Posted by Perdieu

Tim, I can't remember if you're lowered or not.
Had a friend run a set this weekend, cleared without rubbing on a non-lowered car. Phone was dead so I didn't get pictures.

Yes, 3/4" in the front and 1" in the back. Still don't have the tires mounted yet.

KyWildcats · 11-13-2016, 05:29 PM

any update?

Tim Adams · 11-25-2016, 02:11 PM

Well they fit. Some are concerned on a hard launch that they may hit the quarter. I think I still have enough room. I still have the stock springs if I need to go back to them.

R3DLT1 · 11-25-2016, 02:28 PM

i had the same set up. never had and issue.

Tim Adams · 11-25-2016, 02:45 PM

Quote:

Originally Posted by R3DLT1

i had the same set up. never had and issue.

Are you lowered though? I am, but just 3/4" in the back with BMR.

R3DLT1 · 11-25-2016, 04:17 PM

Quote:

Originally Posted by Tim Adams

Are you lowered though? I am, but just 3/4" in the back with BMR.

Negative. stock ride height

laynlo15 · 11-26-2016, 05:35 AM

Looks good Tim. I'm lowered on a similar setup. I did have mine milled by Race Star almost 1/2". Mine tuck real nice.

Padre · 11-26-2016, 07:27 AM

Did you weigh the setup vs. stock?

Padre

R3DLT1 · 11-26-2016, 08:41 AM

Quote:

Originally Posted by Padre

Did you weigh the setup vs. stock?

Padre

all around your saving 100 pounds. 60 of front and 40 in the rear

Mr. Texas · 11-26-2016, 09:53 AM

Did you get the wheels direct from Race Star? Looks great!

Tim Adams · 11-26-2016, 10:21 AM

Quote:

Originally Posted by Mr. Texas

Did you get the wheels direct from Race Star? Looks great!

No, Summit and Jegs.

Padre · 11-26-2016, 11:55 AM

Also, I assume those are 5x4.75 and not 5x120? Or does Race Star make the specifically for the proper Camaro 120 pattern?

Padre

Perdieu · 11-26-2016, 01:13 PM

Quote:

Originally Posted by Tim Adams

Well they fit. Some are concerned on a hard launch that they may hit the quarter. I think I still have enough room. I still have the stock springs if I need to go back to them.

Looks good Tim.
you have way more room then I had ???

parish8 · 11-26-2016, 02:05 PM

that looks great. what was the total cost? how does it drive?

11-13-2016, 05:29 PM	#16
KyWildcats Z Bowman Drives: 2010 2SS (SOLD), 2016 2SS, 2007 Z71 Join Date: Aug 2011 Location: Kentucky Posts: 222 View My Garage	any update? __________________ 2016 2SS M6 Bo White Ported MSD, Bo White Ported TB, Flex Fuel Kit, Drag Pack, Rotofab, Ryan Stevens GPI tune, 15” conversion Fastest Bolt On N/A M6 Record Holder 11.268 @ 120.268 2010 2SS/RS A6 (sold)Mods: Borla Atak Catback, Stainless Power 1 7/8 Headers, TSP VVT-3 Cam, 3200 Yank Stall, CAI Inake, Ported TB, 18" MT ET STREETS

11-25-2016, 02:11 PM	#17
Tim Adams Drives: 2020 Elkhart Lake Blue 1LT Z51 C8 Join Date: May 2009 Location: Minooka, IL Posts: 621	Updated Well they fit. Some are concerned on a hard launch that they may hit the quarter. I think I still have enough room. I still have the stock springs if I need to go back to them. Attached Images __________________ Ordered-Hyper Blue 1SS, A8, NPP, 56W wheels Built 1/20/16 Delivered 2/12/16!! Sold 9/17/19 :( 2020 C8 ordered!! "The greatest sound in the world is a Rolls Royce Merlin over 100 inches" www.timadamsphotography.com

11-25-2016, 02:28 PM	#18
R3DLT1 Toyota Tech Drives: 2SS A8 Join Date: Jul 2014 Location: Bartlesville, OK Posts: 465	i had the same set up. never had and issue. __________________ 2016 Camaro SS A8 Roto-Fab CAI: Drag set up 11.9 @116 Sold 95 Camaro Z28 Cam:Bolt ons: 12.3 @114 Sold 2013 Chevy Crzue LTX

11-26-2016, 07:27 AM	#22
Padre Only drives on Sundays Drives: '16 2SS A8 NPP MRC NGray Join Date: Feb 2011 Location: Dalton, GA Posts: 2,500 View My Garage	Did you weigh the setup vs. stock? Padre __________________ OLD HOTNESS: The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos D1SC GT9 JBA-LT = 720/680 \| 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington. NEW HOTNESS: '16 2SS A8 NPP MRC. Bone Stock, 1/8th: 8.051 @ 89.44, 1.919

11-26-2016, 11:55 AM	#26
Padre Only drives on Sundays Drives: '16 2SS A8 NPP MRC NGray Join Date: Feb 2011 Location: Dalton, GA Posts: 2,500 View My Garage	Also, I assume those are 5x4.75 and not 5x120? Or does Race Star make the specifically for the proper Camaro 120 pattern? Padre __________________ OLD HOTNESS: The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos D1SC GT9 JBA-LT = 720/680 \| 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington. NEW HOTNESS: '16 2SS A8 NPP MRC. Bone Stock, 1/8th: 8.051 @ 89.44, 1.919

11-26-2016, 05:35 AM	#21
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Looks good Tim. I'm lowered on a similar setup. I did have mine milled by Race Star almost 1/2". Mine tuck real nice.

11-26-2016, 09:53 AM	#24
Mr. Texas Drives: 2016 Mosiac Black 2SS A8 Join Date: Apr 2011 Location: Richmond, Tx Posts: 127	Did you get the wheels direct from Race Star? Looks great!

11-26-2016, 02:05 PM	#28
parish8 Drives: 17 SS a8 Join Date: Feb 2010 Location: omaha Posts: 1,678	that looks great. what was the total cost? how does it drive?

User Name		Remember Me?
Password