[SS 1LE]

Originally Posted by jdasnt3

Nice run and great DA, Is this the first M6 in the 11's?

Nope. A guy went 11.9 a little while back stock (had Michelins, so not "stock" as per "rules"), he is on the list. And the soon to be quickest car on the list is a manual with a 125 shot that ran 10.6. I know of a few others in the 11's close to stock that aren't members unfortunately too...

[Fraxum]

Originally Posted by jdasnt3

Nice run and great DA, Is this the first M6 in the 11's?

Looks like the second. I had the DA wrong after checking again. It was -571, good DA, but Atco can have much better. If I can get to Atco on one of those mineshaft air days or nights and pull a better 60' the car has even more potential. I could only get to 12.3 stock when I was really trying. But when I did beat on the clutch and RPM on the launch, I experienced big wheelhop. Now that is fixed. My goal with my mods was 11s. That was easy. the M6 SS.

[SS 1LE]

Originally Posted by Fraxum

Looks like the second. I had the DA wrong after checking again. It was -571, good DA, but Atco can have much better. If I can get to Atco on one of those mineshaft air days or nights and pull a better 60' the car has even more potential. I could only get to 12.3 stock when I was really trying. But when I did beat on the clutch and RPM on the launch, I experienced big wheelhop. Now that is fixed. My goal with my mods was 11s. That was easy. the M6 SS.

So what actual suspension mods did you do that eliminated the wheel hop under a hard launch?

[Fraxum]

Originally Posted by SS 1LE

So what actual suspension mods did you do that eliminated the wheel hop under a hard launch?

Both trailing arms and the upper control arm. I think though in retrospect I should have done the toe rods too. But I thought that would require an alignment so I wanted to avoid that cost. I did not realize what I bought already required an alignment. Life is for learning.

[Ian SS]

What do you consider a hard launch? I have probably 30-35 passes under my belt with drag radials and have gotten a 1.8 60ft and have NEVER had wheel hop.

[Fraxum]

Originally Posted by Ian @ Weseloh Chevrolet

What do you consider a hard launch? I have probably 30-35 passes under my belt with drag radials and have gotten a 1.8 60ft and have NEVER had wheel hop.

Between 4-5K with a progressive clutch slip. I did not have it all the time either. But I had it. Bang, bang.

[Steve 2016 SS]

Originally Posted by SS 1LE

Nope. A guy went 11.9 a little while back stock (had Michelins, so not "stock" as per "rules"), he is on the list. And the soon to be quickest car on the list is a manual with a 125 shot that ran 10.6. I know of a few others in the 11's close to stock that aren't members unfortunately too...

ya thats me, its under post #20 on beat a 2v and raped a hellcat just below in forum, couple of video's too

[hotlap]

2016 2SS Camaro, A8, NPP
Tires used on the pass: Goodyear stock, Rear 27 PSI, Front 40 PSI
Performance Mods (if any): None
Category submitted for: Bone Stock on Stock Tires. 5820 miles

R/T: 0.484
60': 1.951
330': 5.293
660': 7.979
660’ mph: 93.18
1000': 10.287
1320': 12.246
1320’ mph: 116.47
Name of the track: Great Lakes Dragaway, Union Grove, WI
Date of pass: November 12, 2016, 11:37 AM
Weather conditions: 47 degrees, -313 DA

[SYCK SS]

2016 2SS Camaro, M6

Tires used on the pass: Fronts stock @ 32psi / rears Mickey Thompson 305/35/18 drag radials @ 25psi

Performance Mods (if any): catback and 18" welds with drag radials.

Category submitted for: bolt ons no internal mods


60': 1.829
330': 5.074
660': 7.756
660’ mph: 93.72
1000': 10.06
1320': 12.010
1320’ mph: 116.02
Name of the track: Great Lakes Dragaway, Union Grove, WI
Date of pass: November 12, 2016

[laynlo15]

I have some new numbers to post, I'll take pics of my slips here in a bit. My best pass was 11.712@118.66 w/1.732 60 ft, (7.581@94.26), but here is the kicker, next pass 11.761@121.32mph. I had one other pass over 120 mph also.

[danielblack60]

Tires used on the pass: Fronts stock, 17" dr's on rear

Performance Mods (if any): cat delete, converter, tune

Category submitted for: bolt ons no internal mods


60': 1.645
330': 4.795
660': 7.391
660’ mph: 95.14
1000': 9.635
1320': 11.549
1320’ mph: 116.51
Name of the track: Beech Bend Raceway
Date of pass: November 12, 2016

[laynlo15]

Wow, great pass Daniel.

[JFM-jr]

Originally Posted by danielblack60

Tires used on the pass: Fronts stock, 17" dr's on rear

Performance Mods (if any): cat delete, converter, tune

Category submitted for: bolt ons no internal mods


60': 1.645
330': 4.795
660': 7.391
660’ mph: 95.14
1000': 9.635
1320': 11.549
1320’ mph: 116.51
Name of the track: Beech Bend Raceway
Date of pass: November 12, 2016

DAAAAM Daniel! Nice pass converter is getting it done can you share info on it?

[danielblack60]

Originally Posted by laynlo15

Wow, great pass Daniel.

Thanks man! i figured I'd see you there but I didn't. There were 4 6th gens total yesterday.