[jdasnt3]

Originally Posted by Roto-fab 1

I'm glad you enjoyed your Roto-fab CAI. Thanks for taking the time to share your experience with different manufacturers! Do you happen to have a picture of the Roto-fab on your 2015?

Thanks again for sharing,
Michael

I do, but it is on my home PC. I'm in Australia for another week. When I get home, I'll look for it.

[jdasnt3]

Originally Posted by jdasnt3

I do, but it is on my home PC. I'm in Australia for another week. When I get home, I'll look for it.

Found one that I used to sell the system when I had purchased 16 SS and needed to find it a new home.

[slick3]

Have you guys thought about making your system in CF? Why you ask? Because... well... CF duh!

[Roto-fab 1]

Originally Posted by slick3

Have you guys thought about making your system in CF? Why you ask? Because... well... CF duh!

I'm sorry to say that at this time, we do not plan to offer this system with a carbon fiber finish. However with proper surface preparation, the materials used for the MAF housing and inlet elbow will accept a hydrographic finish. If you are doing more carbon fiber under the hood, you will be able to have it all finished by the same company with the same pattern. I can reccommend a hydrographic finishing company if you'd like.

Thanks for your interest,
Michael

[Megahurtz]

Originally Posted by slick3

Have you guys thought about making your system in CF? Why you ask? Because... well... CF duh!

You realize that would at least double the price of the intake right?

[cncmotors]

I just installed 5 Roto-Fabs for customers and they love it for sure!

[Roto-fab 1]

Originally Posted by cncmotors

I just installed 5 Roto-Fabs for customers and they love it for sure!

That's great to hear! Do you happen to have a picture of your shop's Camaro? I heard it's supercharged!

Michael

[slick3]

Originally Posted by Megahurtz

You realize that would at least double the price of the intake right?

I had a CF airraid on my mustang it was 580 bucks .It was a nice piece. Was just curious...

[WhiteyDog]

D*mn, looks like a high quality, well designed CAI.

[cncmotors]

We just put the car on dyno and it have 11hp gained!!

[Roto-fab 1]

Originally Posted by WhiteyDog

D*mn, looks like a high quality, well designed CAI.

Thank you for sharing your thoughts! We sure don't cut corners.

Originally Posted by cncmotors

We just put the car on dyno and it have 11hp gained!!

Thats great to hear! Do you have a dyno sheet saved?

Michael

[cncmotors]

Originally Posted by Roto-fab 1

Thank you for sharing your thoughts! We sure dont cut corners.



Thats great to hear! Do you have a dyno sheet saved?

Michael

Of course!
This test was only with Dry filttered Roto-Fab CAI!!

[cncmotors]

Max Torque is almost same as before but it doese increased from middle to high rpm ranges as shown as on the graph!!

[WhiteyDog]

Originally Posted by cncmotors

Of course!
This test was only with Dry filttered Roto-Fab CAI!!

It's good to see independent testing other than some of the manufacturers claims of seemingly unbelievable results. It's so much easier (to me), to buy a good looking, functional piece when there are proven results. Well built, functional, looks good=looking for the UPS/FedEx truck a few days later.