2016 Camaro Tunes - Page 10

ParisTNDude · 09-01-2016, 06:56 AM

Quote:

Originally Posted by DisturbedSS

C'mon man, you werent supposed to be paying attention to my blathering posts!

Well.... I never said worthless, but its fast becoming more of a zero sum gain unless you heavily mod. Yea, I flip flopped a bit. If the same thing happens on the Carmaro that did on the stingray with the exact same engine - it will be worthless! Since its not inTune this time, I dont see that happening. Remember Ive had a GT, Stingray, RT, SS and Z the last 9 months - and canned tune tested all of them (all 2016s) - muscle car heaven, well not Venom, Aventador, or Spyder level Heaven. ;O)

This will be the first non-canned tune for me (Jannetty Racing)...from the reviews around the net, hes pretty solid. Will find out Thursday!

It's been a while since Jannetty tuned one of my cars. He did my 2008 Mustang Bullitt and my Gen5 Camaro and both were excellent performance improvements...thanks to Ted. I would like to hear some of those who have used the Jannetty 2016 Camaro tune as to the improvements documented. I still have my SCT tuner and may have to give Jannetty a call.

JANNETTYRACING · 09-01-2016, 08:19 AM

Quote:

Originally Posted by ParisTNDude

It's been a while since Jannetty tuned one of my cars. He did my 2008 Mustang Bullitt and my Gen5 Camaro and both were excellent performance improvements...thanks to Ted. I would like to hear some of those who have used the Jannetty 2016 Camaro tune as to the improvements documented. I still have my SCT tuner and may have to give Jannetty a call.

Thank you for your continued business.

As I stated earlier we can make the car feel a bit better through torque management reduction if the car is all stock.

Power comes from the parts, tuning makes the parts work to they're full potential.

We are recommending ARH LT headers and exhaust for best bolt on gains with our tuning.

CAI is due to release the newest Patented version we are excited about this model, I should have some by the middle of the month or sooner.

Ted.

Kaizer_911 · 09-01-2016, 10:39 AM

Quote:

Originally Posted by JANNETTYRACING

Thank you for your continued business.

As I stated earlier we can make the car feel a bit better through torque management reduction if the car is all stock.

Power comes from the parts, tuning makes the parts work to they're full potential.

We are recommending ARH LT headers and exhaust for best bolt on gains with our tuning.

CAI is due to release the newest Patented version we are excited about this model, I should have some by the middle of the month or sooner.

Ted.

Looking forward to the release of the new CAI intake. That's what I've been waiting on to add it to my Camaro. As for headers I'm having to wait some more due to tuning issues still with 2017s.

Sent from my iPhone using Tapatalk

JANNETTYRACING · 09-01-2016, 10:41 AM

Quote:

Originally Posted by Kaizer_911

Looking forward to the release of the new CAI intake. That's what I've been waiting on to add it to my Camaro. As for headers I'm having to wait some more due to tuning issues still with 2017s.

Sent from my iPhone using Tapatalk

We can tune the 2017 now with HPtuners.

Ted.

Kaizer_911 · 09-01-2016, 10:42 AM

Quote:

Originally Posted by JANNETTYRACING

We can tune the 2017 now with HPtuners.

Ted.

Yeah, ABADZL1 and I, had been helping them get the beta working by logging my car and sending all kinds of stuff in to them.

It's 6 credits and still has some issues/work arounds. I'm holding off for the moment.

Sent from my iPhone using Tapatalk

DisturbedSS · 09-13-2016, 08:14 PM

For anyone on the fence with tuning, I'd like to share my experience.

Purchased the SCT tuner from JannettyRacing which comes with 1 free custom tune. First of all NO ONE else gives you a custom tune for free - canned yes, custom absolutely not. Ted sent me a custom tune and asked for logging as he saw something stand out - which showed lean on idle. Turned out to be the way my CAI (Cold Air Inductions brand) was rotated which affected flow across the MAF - what a great catch!

The tune gave my SS more power throughout the curve, better throttle response and most surprising of all, a slight bump in MPG. How, I dont know...but 3 tanks later can confirm its true.

All I can say is it was well worth the price and the tune wasnt dialed up to crazy engine threatening levels - which Im not interested in anyways. Big double thumbs up here!

DisturbedSS · 09-13-2016, 08:17 PM

Quote:

Originally Posted by ParisTNDude

It's been a while since Jannetty tuned one of my cars. He did my 2008 Mustang Bullitt and my Gen5 Camaro and both were excellent performance improvements...thanks to Ted. I would like to hear some of those who have used the Jannetty 2016 Camaro tune as to the improvements documented. I still have my SCT tuner and may have to give Jannetty a call.

Quoted on this already...but if you havent had Ted tune your 2016 as of yet, I highly recommend you do another go round with him. Mine is excellent.

JANNETTYRACING · 09-15-2016, 08:29 AM

Thank you Disturbed, I appreciate the feedback and the endorsement.

Ted.

Darth Martel · 09-22-2016, 01:35 PM

Hi Ted,

Will you be able to provide a tune for a 16 1SS with Stainless Works headers and catback exhaust? I may be doing a ported throttle body and CAI as well depending on if we can get confirmation that roto-fab's CAI proves to add any benefit.

I purchased my setup from you for my Gen5 1SS and was very happy with the parts and tune. Just hoping to repeat the experience with my Gen6 but, want to make sure it's something you feel comfortable we can have great results with.

thanks

JANNETTYRACING · 09-22-2016, 04:16 PM

Quote:

Originally Posted by Darth Martel

Hi Ted,

Will you be able to provide a tune for a 16 1SS with Stainless Works headers and catback exhaust? I may be doing a ported throttle body and CAI as well depending on if we can get confirmation that roto-fab's CAI proves to add any benefit.

I purchased my setup from you for my Gen5 1SS and was very happy with the parts and tune. Just hoping to repeat the experience with my Gen6 but, want to make sure it's something you feel comfortable we can have great results with.

thanks

Hello Darth, Absolutely I have done this combo at least a dozen times already I am very confident in the tune I will provide.

Thank you for your business.

Note we are a Stainless works dealer which would qualify you for a FREE tune with purchase from JRE.

Ted.

laynlo15 · 09-22-2016, 11:08 PM

Waiting for the A8 tune. Too bad he can't do a tune for E85, that's what I want to do.

Darth Martel · 09-23-2016, 07:32 AM

YES!!! I'm just saving up funding at the moment but, will be pulling the trigger come March/April.

Quote:

Originally Posted by JANNETTYRACING

Hello Darth, Absolutely I have done this combo at least a dozen times already I am very confident in the tune I will provide.

Thank you for your business.

Note we are a Stainless works dealer which would qualify you for a FREE tune with purchase from JRE.

Ted.

TwistedLT1 · 10-10-2016, 10:26 AM

I'm considering a tune from a tuner who uses HP, just worried about a flash counter and the warranty

JANNETTYRACING · 10-10-2016, 10:40 AM

Quote:

Originally Posted by TwistedLT1

I'm considering a tune from a tuner who uses HP, just worried about a flash counter and the warranty

I tune with HPtuners since 2003 and can help you, but still prefer to tune remotely with SCT.

There is no getting around the Flash counter.

Ted.

09-15-2016, 08:29 AM	#134
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,415	Thank you Disturbed, I appreciate the feedback and the endorsement. Ted. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

09-22-2016, 01:35 PM	#135
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,495	Hi Ted, Will you be able to provide a tune for a 16 1SS with Stainless Works headers and catback exhaust? I may be doing a ported throttle body and CAI as well depending on if we can get confirmation that roto-fab's CAI proves to add any benefit. I purchased my setup from you for my Gen5 1SS and was very happy with the parts and tune. Just hoping to repeat the experience with my Gen6 but, want to make sure it's something you feel comfortable we can have great results with. thanks __________________ 2016 Black 1SS w/ MRC, low-gloss black wheels, auto trans. Self-created custom Dark Knight Edition accents. Rotofab CAI with dry filter and sound tube delete, PRAY ported intake manifold and throttle body, Texas Speed cam, Stainless Works headers and exhaust, Skid Mark garage E85 kit, JMS fuel pump voltage booster, Circle D torque converter. Custom E85/mod tune by Jannetty Racing.

09-13-2016, 08:14 PM	#132
DisturbedSS Drives: 16 Camaro 2SS Join Date: Aug 2016 Location: AZ Posts: 224	For anyone on the fence with tuning, I'd like to share my experience. Purchased the SCT tuner from JannettyRacing which comes with 1 free custom tune. First of all NO ONE else gives you a custom tune for free - canned yes, custom absolutely not. Ted sent me a custom tune and asked for logging as he saw something stand out - which showed lean on idle. Turned out to be the way my CAI (Cold Air Inductions brand) was rotated which affected flow across the MAF - what a great catch! The tune gave my SS more power throughout the curve, better throttle response and most surprising of all, a slight bump in MPG. How, I dont know...but 3 tanks later can confirm its true. All I can say is it was well worth the price and the tune wasnt dialed up to crazy engine threatening levels - which Im not interested in anyways. Big double thumbs up here!

09-22-2016, 11:08 PM	#137
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Waiting for the A8 tune. Too bad he can't do a tune for E85, that's what I want to do.

10-10-2016, 10:26 AM	#139
TwistedLT1 Drives: 2016 Camaro 1SS, MT6, NPP Join Date: Mar 2016 Location: Oklahoma Posts: 44 View My Garage	I'm considering a tune from a tuner who uses HP, just worried about a flash counter and the warranty

User Name		Remember Me?
Password