What did you do to your 6th Gen Camaro today?! - Page 75

Metsfan · 09-18-2016, 10:24 PM

Added some window tint and orange metallic striping.

jp9109 · 09-18-2016, 10:36 PM

Today I installed the street scene kit, blacked out the rear reflectors, side markers, headlamps, drls and the chrome strips below the drls.

I have some big plans for the splitter and rocker, that's why they aren't painted yet. Just installed them to get some pictures to sketch over...

Made some progress with the homemade flow tie as well, which is why it is abscent. Kinda like the look though....I'm considering cutting out the mount and filling in that area with the grille texture.

7rank · 09-18-2016, 11:03 PM

Quote:

Originally Posted by jp9109

Today I installed the street scene kit, blacked out the rear reflectors, side markers, headlamps, drls and the chrome strips below the drls.

I have some big plans for the splitter and rocker, that's why they aren't painted yet. Just installed them to get some pictures to sketch over...

Made some progress with the homemade flow tie as well, which is why it is abscent. Kinda like the look though....I'm considering cutting out the mount and filling in that area with the grille texture.

HAH! the little one definitely approves! nice job..

jp9109 · 09-18-2016, 11:26 PM

Quote:

Originally Posted by 7rank

HAH! the little one definitely approves! nice job..

He's my helper!! Thanks!!

efpardo · 09-19-2016, 12:19 AM

Looks Bad Ass - I like how the wheels pop from the black givining it a nice contrast.

Quote:

Originally Posted by KirkH

added (illegal) window tinting

efpardo · 09-19-2016, 12:22 AM

Nice stripes!

Quote:

Originally Posted by Metsfan

Added some window tint and orange metallic striping.

Blam2526 · 09-19-2016, 04:13 AM

Quote:

Originally Posted by jp9109

Today I installed the street scene kit, blacked out the rear reflectors, side markers, headlamps, drls and the chrome strips below the drls.

I have some big plans for the splitter and rocker, that's why they aren't painted yet. Just installed them to get some pictures to sketch over...

Made some progress with the homemade flow tie as well, which is why it is abscent. Kinda like the look though....I'm considering cutting out the mount and filling in that area with the grille texture.

Thanks for the pics. I've been wanting to see the full stillen kit on HBM. Are the back pieces just flat little covers? I don't really see the point of those. Also, what is the install process, just tape on the front or rivets and tape? Rivets and tape on the sides? Did you have to drill anything new? I'm pretty sold on the front, but was looking at ACS for the sides. I'm almost positive they install with existing screws and tape. Thanks again!

jp9109 · 09-19-2016, 07:53 AM

Quote:

Originally Posted by Blam2526

Thanks for the pics. I've been wanting to see the full stillen kit on HBM. Are the back pieces just flat little covers? I don't really see the point of those. Also, what is the install process, just tape on the front or rivets and tape? Rivets and tape on the sides? Did you have to drill anything new? I'm pretty sold on the front, but was looking at ACS for the sides. I'm almost positive they install with existing screws and tape. Thanks again!

Yes the back pieces are flat, they are there to help the rockers visually flow into the rear of the car and not just abruptly end before the rear wheel.

Installation of the splitter is 3m tape and the existing bolts on the lower fascia plus 4 self tapping #10 screws for the outboard edges. The rockers are 3m tape plus 9 self tapping screws, these do not use existing mounting points and same for the diffuser sections just 5 screws on each side.

There was no drilling required, just the self tapping screws and where they mount into the fascia, rockers, and diffuser is not seen unless you look under the car so no one should be too concerned about having to screw into the car. Only place you may see from a normal viewing position is the fascia screws.

KirkH · 09-19-2016, 09:58 AM

Quote:

Originally Posted by efpardo

Looks Bad Ass - I like how the wheels pop from the black givining it a nice contrast.

Thanks Bro! I like the silver wheel look too.

Rsblueblood · 09-19-2016, 11:45 AM

Quote:

Originally Posted by KirkH

added (illegal) window tinting

Looks great Kirk.

rubamen · 09-19-2016, 12:39 PM

A new look for my wheels

ArmyAv8r91 · 09-19-2016, 01:14 PM

Added hash marks and the blackout kit. Next up MRR M228 Wheels!

KirkH · 09-19-2016, 01:55 PM

Quote:

Originally Posted by rubamen

A new look for my wheels

SMOKIN'!

TECHTURTLE · 09-19-2016, 03:32 PM

Added a Black Spoiler and Fuel Door... Sorry, I know she needs a bath.

09-18-2016, 10:24 PM	#1037
Metsfan Drives: 2016 2SS A8 w/ NPP, MRC Join Date: Sep 2015 Location: Charlotte, NC Posts: 38	Added some window tint and orange metallic striping. Attached Images

09-18-2016, 10:36 PM	#1038
jp9109 Clay Sculptor at GM Drives: 2016 Camaro 2SS, M6, MRC, NPP Join Date: Sep 2015 Location: Southeast Michigan Posts: 177	Today I installed the street scene kit, blacked out the rear reflectors, side markers, headlamps, drls and the chrome strips below the drls. I have some big plans for the splitter and rocker, that's why they aren't painted yet. Just installed them to get some pictures to sketch over... Made some progress with the homemade flow tie as well, which is why it is abscent. Kinda like the look though....I'm considering cutting out the mount and filling in that area with the grille texture. Attached Images

09-19-2016, 12:39 PM	#1047
rubamen Drives: red camaro 2ss Join Date: Jul 2016 Location: boca raton fla Posts: 27	A new look for my wheels Attached Images

09-19-2016, 01:14 PM	#1048
ArmyAv8r91 Drives: 2017 Chevrolet Camaro 1SS (silver) Join Date: Aug 2016 Location: AL Posts: 7	Added hash marks and the blackout kit. Next up MRR M228 Wheels! Attached Images

09-19-2016, 03:32 PM	#1050
TECHTURTLE Drives: 2016 Camaro 2SS Join Date: Dec 2013 Location: OTP Atlanta Posts: 862 View My Garage	Added a Black Spoiler and Fuel Door... Sorry, I know she needs a bath. Attached Images __________________ 2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation Added Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.

User Name		Remember Me?
Password