Mounted 22 X 10.5 all the way around! (UPDATED WITH PICS) First Page!! - Page 3

JustShootMe · 09-03-2016, 05:41 PM

Looks really good , what size tires did you go with ? Any rubbing ?

BradfordCamaro · 09-03-2016, 05:59 PM

Got some stretch going on in the front. Should be lots of room for a drop. Should try the 305 up front to see how it goes, you never know it may work.

Looks really good. Great job doing what you wanted to do and getting a proffesional to help.

HyperBlue · 09-03-2016, 06:11 PM

That looks really good. I like the clean / classic style of the five spoke wheel.

LSxWittles · 09-03-2016, 06:26 PM

Damn that looks amazing

. Nice job

sonnydurden · 09-03-2016, 06:28 PM

Quote:

Originally Posted by JustShootMe

Looks really good , what size tires did you go with ? Any rubbing ?

Thanks!!!! No rubbing.. Went with a 285/25/22 up front and a 305/25/22 in the rear.

sonnydurden · 09-03-2016, 06:33 PM

Quote:

Originally Posted by BradfordCamaro

Got some stretch going on in the front. Should be lots of room for a drop. Should try the 305 up front to see how it goes, you never know it may work.

Looks really good. Great job doing what you wanted to do and getting a proffesional to help.

Thanks!! I can't believe how much room is in the front! A 305 will probably work up front too! But a big shout out to Mike @ Best Wheels!! Going with that +38 offset in the rear with the wider tire really set that thing off!! I think I can get by with a 1" drop!

sonnydurden · 09-03-2016, 06:34 PM

Quote:

Originally Posted by HyperBlue

That looks really good. I like the clean / classic style of the five spoke wheel.

Quote:

Originally Posted by LSxWittles

Damn that looks amazing

. Nice job

Thanks guys!!!!

SC88 · 09-03-2016, 11:38 PM

Man that looks nice. Tires are super thin, I don't think the roads in Chicago would allow for a 25 series tire.

JaxChris · 09-04-2016, 12:59 AM

If you wanted to get 305/25/22 on the front with a 1" drop, you'd need about a +20 offset or less, which would definitely have some poke. You would then need a 15mm spacer on the rear to square up, which I don't think would look as good.

Right how it is looks good and you have just enough room for your 1" drop. Mike was smart to stay right on the factory wheel diameter for the fronts.

sonnydurden · 09-05-2016, 06:31 PM

Quote:

Originally Posted by SC88

Man that looks nice. Tires are super thin, I don't think the roads in Chicago would allow for a 25 series tire.

Thanks man!! Believe me, I'm worried about those 25's and the roads are decent here.

sonnydurden · 09-05-2016, 08:09 PM

Quote:

Originally Posted by JaxChris

If you wanted to get 305/25/22 on the front with a 1" drop, you'd need about a +20 offset or less, which would definitely have some poke. You would then need a 15mm spacer on the rear to square up, which I don't think would look as good.

Right how it is looks good and you have just enough room for your 1" drop. Mike was smart to stay right on the factory wheel diameter for the fronts.

I'm going to do the Eibach Pro Kit! It's 1" all the way around!

LesBaer · 09-28-2016, 07:18 AM

I just saw these...really nice looking wheel/tire combo. How have the tires been holding up for you? I'd love to have tires that thin but there's no way in hell I could pull that off where I drive. I really looks great though.

BMR Tech · 09-28-2016, 09:18 AM

Style and fitment look great with these wheels! excellent choice sir.
Now you just need some of our springs to complete the look

sonnydurden · 10-04-2016, 04:52 PM

Quote:

Originally Posted by LesBaer

I just saw these...really nice looking wheel/tire combo. How have the tires been holding up for you? I'd love to have tires that thin but there's no way in hell I could pull that off where I drive. I really looks great though.

Thanks man!! So far so good! But I work less than a mile from where I live. I have driven around the Atlanta area a great bit. We have some rough roads especially closer to downtown and where my mother lives by Turner Field.. I have just been really really careful and watching the road more than I ever have. But the 25 series is a little tougher than I thought!

09-03-2016, 05:41 PM	#29
JustShootMe Drives: 3015 300s Join Date: Mar 2016 Location: Austin tx Posts: 130	Looks really good , what size tires did you go with ? Any rubbing ? __________________ 2016 Mosaic Black Metallic 1SS NPP M6

09-03-2016, 05:59 PM	#30
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,013	Got some stretch going on in the front. Should be lots of room for a drop. Should try the 305 up front to see how it goes, you never know it may work. Looks really good. Great job doing what you wanted to do and getting a proffesional to help. __________________

09-03-2016, 06:11 PM	#31
HyperBlue Drives: 2011 MB E350 wagon Join Date: Aug 2016 Location: Los Angeles Posts: 313	That looks really good. I like the clean / classic style of the five spoke wheel. __________________ 2015 BMW M235i (sold!) Lusting HARD for a Gen 6 Camaro 1SS 1LE

09-03-2016, 11:38 PM	#36
SC88 Twin Turbo Drives: 2016 2SS Join Date: Jul 2016 Location: Illinois Posts: 290	Man that looks nice. Tires are super thin, I don't think the roads in Chicago would allow for a 25 series tire. __________________ Boost, Boost & More Boost Instagram = BoostedSS

09-28-2016, 07:18 AM	#40
LesBaer FMPG Drives: 2016 2SS Join Date: Dec 2015 Location: CT Posts: 1,888	I just saw these...really nice looking wheel/tire combo. How have the tires been holding up for you? I'd love to have tires that thin but there's no way in hell I could pull that off where I drive. I really looks great though. __________________ Ordered 3/8/16- NFG/Ceramic White, M6, MRC, NPP, 6 pots, blk blade, no sunroof, blk splitter, blk bow ties, dark tails, nav. ARH 1 7/8" ceramic coated full sys w/NPP; Maggie 9.2psi (85mm); Jannetty rough idle cam(TSP), tune and LT4 fuel system; Forgeline VX1 Black PVD (20x10,11); R88R 315's; ALPriority; BMR rear arms, bushings, DS loop; RF intake (red); nGauge 93 octane: 712rwhp, 654rwtq / E85 (E66 mix): 734rwhp, 674rwtq (SuperFlow Dyno)

09-03-2016, 06:26 PM	#32
LSxWittles Drives: Stuff and Things Join Date: Apr 2015 Location: United States Posts: 257	Damn that looks amazing . Nice job

09-04-2016, 12:59 AM	#37
JaxChris Drives: '16 2SS GD1 MX0 NPP F55 IO6 Join Date: Jun 2013 Location: Florida Posts: 1,298	If you wanted to get 305/25/22 on the front with a 1" drop, you'd need about a +20 offset or less, which would definitely have some poke. You would then need a 15mm spacer on the rear to square up, which I don't think would look as good. Right how it is looks good and you have just enough room for your 1" drop. Mike was smart to stay right on the factory wheel diameter for the fronts.

09-28-2016, 09:18 AM	#41
BMR Tech Drives: 2016 Camaro 2SS Join Date: Sep 2009 Location: Tampa, FL Posts: 256	Style and fitment look great with these wheels! excellent choice sir. Now you just need some of our springs to complete the look

User Name		Remember Me?
Password