[Breadzell]

Will the Mishimoto Catch Can for the hard top 2016 2SS also work for the convertible? The convertible has a strut bar that connects where the catch can bracket is supposed to mount. Can this be mounted under the strut bar or will there be another solution?

[JaxChris]

Mishimoto should be able to stamp 3 equal thickness spacers for convertible customers, or measure with a caliper tool and go to Ace Hardware to find something suitable.

Remove strut bar
Install catch can bracket and secure with inner mounting bolt
Place 1 spacer between the strut bar and strut tower at the other 3 bolt locations not occupied by the catch can mount
Replace the strut bar bolts

[Springer]

Originally Posted by JaxChris

Mishimoto should be able to stamp 3 equal thickness spacers for convertible customers, or measure with a caliper tool and go to Ace Hardware to find something suitable.

Remove strut bar
Install catch can bracket and secure with inner mounting bolt
Place 1 spacer between the strut bar and strut tower at the other 3 bolt locations not occupied by the catch can mount
Replace the strut bar bolts

I installed mine by removing the strut, installing the can As stated above, then reinstalling the cross member. I did not notice a need for spacers but thinking about it now I am going to double check my install. Pretty easy actually.