|
|
#1 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2015 Z/28 #533 Join Date: Jul 2012
Location: NY
Posts: 6,732
|
LT1 Normal Oil Pressure Range
I'm probably being incredibly paranoid about the pick up tube recall but I feel like the idle oil PSI has dropped since when I first got the car. While idling on a warm engine it's sitting around 28-29 PSI. Is this around what everyone else is at?
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 3,022
|
I've noticed my oil press. has also always been much lower than my LLT V6.
Never greater than 40 even at start-up (hot weather since I got the car). I'm sure it's dropping down in the 28-30 range when warmed up and at idle. |
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2015 Z/28 #533 Join Date: Jul 2012
Location: NY
Posts: 6,732
|
I know it'll definitely be lower than the V6s with the DOHCs and all the other valvetrain parts. I'm pretty sure those engines used to hit the peg on a cold start.
|
|
|
|
|
|
#4 |
![]() Drives: 2016 1ss black 6m Join Date: Apr 2016
Location: Kentucky
Posts: 69
|
I'm in my ss now at warm idle and just a hair under the 30 mark. So the same as your ss.
|
|
|
|
|
|
#5 |
![]() Drives: 2016 SS 6M, Mag Ride, Dual Ex Join Date: Aug 2016
Location: San Diego
Posts: 3
|
Here's the thread I was looking for. Just watched mine for the first time SS, 28-29 fully warmed up at idle and lower rpms. Gets up to a little under 40 under rpms. Was wondering if this was normal myself. Seems like it is.
|
|
|
|
|
|
#6 |
![]() Drives: 2016 Hyper Blue Metallic 2SS Join Date: Oct 2017
Location: IL
Posts: 17
|
Mine sits about 30 maybe lil less when hot idling and 35 cruising. Rarely goes upto or over 40 unless I go WOT at which point only at very high rpm does it hit 50 or so. Is that normal? This is my second 2016 and I could have swore my first one had a little higher pressure then this.
|
|
|
|
|
|
#7 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
|
|
|
|
|
|
#8 | |
![]() Drives: 2017 Camaro SS Join Date: Sep 2015
Location: Kansas
Posts: 22
|
Quote:
The relief valve (should) stop oil pressure from exceeding between 55 and 75 psi. |
|
|
|
|
|
|
#9 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,561
|
As long as oil pressure increases with rpm then it's fine. Idle pressure does not need to be very high.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#10 |
![]() Drives: 2016 Camaro 2SS Summit White Join Date: May 2016
Location: Maryland
Posts: 260
|
|
|
|
|
|
|
#11 |
|
Banned
Drives: 6 on the Flo' Super Sport Join Date: Jan 2011
Location: md
Posts: 1,924
|
Not like old cars....OP now fluctuates depending on the engines requirements. No longer just what the pump pumps out. All controlled by sensors now.
|
|
|
|
|
|
#12 |
![]() Drives: 2018 1SS Join Date: Dec 2018
Location: MA
Posts: 306
|
Should I expect a difference in pressure when I run 5-40 oil per the track-prep guide for track days? When I run the standard 5-30 I run slightly below 40 PSI. When I run the 5-40 I am closer to 45. Both these PSI readings are "most of the time" readings, meaning when I look, that's where they are.
__________________
2018 Red Hot 1SS, GM lowering kit & 1LE Sway bar kit, ZL1 1LE solid rear cradle bushings, BMR sway bar end links, GM CAI w/tune, Pray ported IM, Mamo ported TB, VS Forged VS07 rims 20x11 & 20x10 w/ Michelin PS4S
|
|
|
|
|
|
#13 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,561
|
Yes thicker oil will increase pressure.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#14 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,485
|
at operating temp mine shows 30 psi idling, and it gradually increases to around 55 psi with rpm up to 6100 or so. at 6100 it jumps to 70+ psi. oil weight doesn't seem to make a difference. i've had 5-30, 0-40 & 5-40 in it. all the same except the heavier oils make a little more pressure when cold below 5k rpm.
__________________
2016+ camaro: everyone’s first car
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|